Used Sprouts Punch for sale (1,650)

Condition: good (used), Renz Punch 500 Perforator This machine is in very good condition. The set includes the original machine base. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Blsdpfxjx A Sd Ro Abber Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 Bodpfx Abocqxv Tsbslr 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Bjdpfx Aeuzv Tzjbbslr Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Bjdpfxex A Sd De Abbelr Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Year of construction: 2007, condition: good (used), MAKE - LVD, Made in USA/BELGIUM MODEL - GLOBAL 20 1225 YEAR - 2007 CONTROL - FANUC 180I - PB CAPACITY - 20 Tons THROAT DEPTH - 1250.0 mm SHEET SIZE MAX. - 2500.0 x 1250.0 mm (1250.0 x 5000.0 mm) MAXIMUM WORK PIECE WEIGHT - 150 Kg MAXIMUM MATERIAL THICKNESS - 6.0 mm MAXIMUM TABLE SPEED - 0 – 4330.0 TURRET - 30 STATIONS, 4 AUTO-INDEXING MAXIMUM PUNCHING DIAMETER - 89.0 mm PUNCHING SPEED - 350 STROKES/MIN NIBBLING SPEED - 900 STROKES/MIN PRESS MOTOR POWER RATING - 460V 3 Phase Motor DIMENSIONS - 5560.0 x 5560.0 x 2400.0 mm WEIGHT - 16,000 Kg PLUS BRUSH TABLE VERY LOW HOURS Blsdjiab Epjpfx Abbjr GOOD RANGE OF TOOLING

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Price: On request Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Control: Conventional - Motor power: 4.0kW - Model: Hydraulic - Power: 60.0ton - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Blsdpfxowraaze Abbjr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching Bljdpfx Ajx Dclbobbor -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: like new (used), max. round hole Ø: 25 mm max. slot hole Ø: 25 x 18 mm max. material thickness: 16 mm Bljdpfx Ajx A U Sksbbsr punching time with AHP-M pump: 10 s throat depth: 110 mm punching force: 44 t punch stroke: 25 mm weight: 47.3 kg

Condition: excellent (used), Swing Arm Punch Press / Hydraulic Manufacturer: Atom Stock No. 3762 Bjdox A Hwxepfx Abbelr Type: SE 16 * Pressing force: 16 tons * Stroke: 90 mm * Throat: 560 mm * Table size: 800x400 mm * Punch: 460x350 mm * Motor: 0.8 kW * Dimensions approx. 800x900x1350 mm * Weight approx. 560 kg

Condition: used, Grindermak 150-06 Grindermak 150-06 Blsdpofuakcjfx Abbor New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING Blodpfx Ajxvch Tobbjr ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: used, Year of construction: 1998, total length: 2,300 mm, total width: 1,100 mm, total height: 2,000 mm, Empty weight: 1.500 kg Price: On request Capacity bar: 45mm Capacity strip: 450x15mm Punch: diameter 40 in 14mm - Year: 1998 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8350 - Control: Conventional - Table width: 640mm - Table length: 1000mm - Ram width: 50mm - Ram length: 100mm - Model: Hydraulic Blodpfxjw Dvghe Abbor - Max. stroke: 80mm - Power: 80.0ton - Transport dimensions: 2300mm x 1100mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty Bedjw Hlztepfx Abbslr

Condition: excellent (used), Year of construction: 2000, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke Blodpfxjxtu Nwj Abber (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Condition: excellent (used), Hydraulic Swing Arm Punch Press Manufacturer: Pedersen Stock no.: 3751 Model: 273 M * Pressing force: 20 tons Bsdsx A Hwlepfx Abbslr * Stroke: 150 mm * Throat depth: mm * Table size: 1020x505 mm * Punch size: 760x530 mm * Motor power: kW * Weight: approx. 650 kg

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Unmanned operation Bedpsfuai Uefx Abbelr Simple operator control Quick, reliable grinding of all standard tooling Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Automatic grinding wheel dress indication Excellent surface finish Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Bledpfx Ajxz Ugxsbbjr Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: used, Year of construction: 1992, total length: 2,200 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 3.000 kg Price: On request Iron worker, punch press and section shear  Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70/SD Capacity: 70 ton Schear round: 45mm Schear beam: 45mm Schear plat: 450x15mm Notching: 250x6mm Bsdpfewnhi Nsx Abbelr Incl. multiple punches Machine-afmetingen: 2200x1000x2000mm Machine-weight: 3000kg - Year: 1992 - Documentation available: No - CE certificate present: No - Transport dimensions: 2200mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm max thickness: 3 mm steel Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Work mode: Roll forming unit Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press Bsdpfx Aoxuwyuobbelr CUTTING DEVICE: Flying Shear Conveyor: Yes

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Bljdpfx Abjhtfp Tebsr Additional extras with the machine: Cabinet full of tooling Multitool Multiset – tool setter Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Power: 70.0ton - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Blsdpjw Ryxmjfx Abbsr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale A late Trumpf 500 just before the 5000r 2.5metre x 1250mm sheet metal before reposition Blodpfx Abeh Nf Upebsr 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: · Capable of taking multi tool a good selection of tooling available along with multi tools

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Bljdpfxjwnhd Hj Abbor Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Bodpjng Al Aofx Abbslr Good condition and can be seen working in production Complete with:

Condition: used, total length: 1,900 mm, total width: 950 mm, total height: 1,800 mm, Empty weight: 2.150 kg Price: On request - Maximum capacity (⌀ x thickness): 28 mm x 20 mm - Strokes per minute (at 20 mm stroke): 38 - Working height: 890 mm - Largest hole (optional): 38 mm - Max. bar bending: 250 x 12 mm - Max. sheet bending: 500 x 3 mm - Max. angle cutting (90°): 130 x 13 mm Bljdpexhcfpjfx Abbor - Max. angle cutting (45°): 70 x 10 mm - Notching (material thickness): 10 mm - Documentation available: No - CE marking present: Yes - CE certificate present: No - Control: Teach-in - Motor power: 7.5kW - Table width: 350mm - Throat depth: 355mm - Table length: 600mm - Ram length: 40mm - Model: Hydraulic - Max. stroke: 55mm - Power: 80.0ton - Transport dimensions: 1900mm x 950mm x 1800mm (l x w x h) - Transport weight [kg]: 2150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum