Used Punching Rotor for sale (2,883)

Condition: refurbished (used), Year of construction: 1984, functionality: limited functionality, pressing force: 40 t, year of last overhaul: 2024, punching force: 40 t, SCHAAL Punching Press Type SEP40 Machine number 84/623 Year of manufacture: 1984 Condition: very good, mechanically overhauled, without press control; A new control unit is available on request Press force: 40 tons Sheet width: 150 mm Stroke: Fixed stroke 50 mm. (Original 8 - 70 mm) Number of strokes – infinitely variable: 100 – 250 spm (possible up to 400 spm, but with the current stroke of 50 mm the maximum is 250 spm) Ram surface: 340 x 320 mm Tool holder bore: Ø 40 x 80 mm Ram adjustment: 70 mm Table size: 550 x 580 mm (not included in the scope of delivery, available upon customer request) Clear opening in table: 400 x 90 mm Lateral frame opening: 250 mm Distance between uprights: 560 mm Drive power: 5.5 kW Dimensions (H x W x L): 2300 x 1600 x 1400 mm Weight: approx. 3,800 kg Feed: Ndjdpfx Aasxwk Tgj Eof Type: SZV 2 Number: EP4340 Year: 1999 Strip width: 8 - 120 mm Feed length: 2 – 80 mm Feed thickness: 0.1 – 2 mm Feed accuracy: ±0.01 mm Equipped with Unidor press force measuring system, calibrated on 29-2-2024 Press and roll feed have been mechanically overhauled at the beginning of 2024. Renewed: eccentric shaft, main bearings, flywheel bearings, connecting rod bearings, ram roller bearings, drive belt for roll feed, pressure regulator, rotary union seals, access doors, and polycarbonate panels. The machine can be inspected in operation.

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 weight of the machine ca. 1 t Ndjdpfxsvvx E Se Aa Eef

Year of construction: 1991, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Technical data: • Manufacturer: elumatec • Model: ST 225 Nsdpfxjw Tcrhs Aa Esdf • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1991

Condition: used, functionality: fully functional, For sale is a MABI 8Z dished end punch which we used as a multi-hole punch. Nedpfxex Dbuns Aa Esdf

Condition: used, Year of construction: 2000, Granulator / Knife Mill Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm Ndedpfox Exukjx Aa Esf + Blower + Big-bag station with cyclone

Condition: ready for operation (used), Year of construction: 2001, overall weight: 9,200 kg, pressing force: 20 t, stroke length: 1,350 mm, controller manufacturer: AMADA, General Data Machine weight 9200 kg Control Unit Brand AMADA Main Drive Pressing force 200 kN Stroke 1350 mm Additional Equipment Nodpfx Asx D If Hea Eodf Next to the machine, there are 2 tool cabinets This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Stroke adjustment 140 mm Installation height 930 mm Ndjdpfx Aexz Hxasa Ejf Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t pressure 30 t volt 380 V frequency 50 Hz Nedpfepxri Hox Aa Esdf

Year of construction: 1997, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Technical data: • Manufacturer: elumatec • Model: ST 225 • Punching force: 6,000 kp at 10 bar Nodpfx Asw Tcpyja Ejdf • Year of manufacture: 05/1997

Year of construction: 2004, operating hours: 38,000 h, condition: excellent (used), Bobst SPanthera 106LE automatic die-cutter Size: 76 x 106 cm Technical Details: paper from 70 to 1000 gsm corrugated board up to 2 mm max. format: 760 x 1,060 mm min. format: 350 x 400 mm speed up to 9,000 Equipment: stripping station Nodpfxsxx Txzo Aa Eodf optical register infeed automatic pile feeder adjustment ultrasonic double sheet detector Centerline 1 micrometric plate 1 plate 4 mm 2 closing frames quick Lock stripping Non-Stop delivery elevated 220 mm

Condition: used, Year of construction: 2000, Granulator / Knife Mill Nodpfx Aaox Ext Tj Eedf Manufacturer: Tria (Italy) Type: 80/45 Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 6500 kg Nedpfex D Ia Rex Aa Ejdf Main Drive Punching force 300 Kn Movement X-Axis Movement 1300 mm This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die. Ndsdpjx Hqmnefx Aa Esf

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja Nsdpfxendz Npe Aa Esdf extensive accessories ca. 50 Sätze pressure 50 t

Year of construction: 2002, condition: used, machine/vehicle number: 54, Item number: MA961 Manufacturer: Boschert Type: P-60 Year of manufacture: 2002 Machine-No.: 54 Length [mm]: 1800 width [mm]: 3000 height [mm]: 1991 weight [kg]: 5800 Connected load: 380V / 4 KW Stroke [mm]: 50 Working height [mm]: 915 Punching force [to]: 60 Nedpfxocq Nbwe Aa Eodf Table size LxW: 1100 mm X 3000 mm accessories: manual table supports

Year of construction: 2003, condition: refurbished (used), functionality: fully functional, machine/vehicle number: BF 030003, This heavy duty 1200mm Granulator was refurbished fully in 2020 . Since then it has done only a very few tonnes of light weight containers after the refurbishment. New fixed and fly blades were fitted recently and it has not run since. 4 Rotating blades and 2 Stator blades. The semi solid rotor is water cooled if needed. Single step Belt drive from 110Kw Motor. Up to 1500 kgs per hour depending on the type of materials and feed rate. Air extractio to cyclone and bagging tower for big bags (FIBC) included. Loading conveyor with metal detection tunnel also included. Capable of grinding rubber also as fitted with the water cooled rotor. Two hoppers included , a standard one as shown in pictures and also included is a top entry completely enclosed hopper (not shown) suitable to received pre-shredded plastics or rubber. Ndedpfxov Su A Eo Aa Ejf

Year of construction: 2000, condition: used, Granulator / Knife Mill Manufacturer: Tria (Italy) Type: 80/45 Nodpsx Extmefx Aa Eedf Main motor: 55 kW Rotor length: 800 mm Rotor diameter: 490 mm + Blower + Big-bag station with cyclone

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 5710 mm Measurements depth 6370 mm Measurements height 2220 mm Machine weight 14000 kg Control Unit Brand BOSCH Model MTX Ndjdpfxox D Nupj Aa Eof Main Drive Number of axis 6 Turret Number of turrets 1 Tools Number of station 12 Media Oil tank 300 liters Additional Equipment Hydraulic Motor Power: 11 kW Axes Drive Type (C1 and C2): Direct drive Hydraulic Punching Force: 30 tons Portable CNC Control Panel Work Chute: Automatic system to take out cut parts Mobile Storage Box for Cut Parts Waste Box Light Barriers This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm Njdpoxgv E Tefx Aa Ejdf 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Condition: new, Year of construction: 2024, Working width: 380 mm Working height: 150 mm 1. Unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with a 3 kW motor 2. Unit, brush: Scotch Brite Hard / diameter 210 mm, variable drive Height adjustment: handwheel Height display: mechanical counter Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Vacuum conveyor belt: yes Ndodpfjtnf Rrjx Aa Eef Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Nsdpfx Aaexyy Aio Eodf Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, General Data Measurements height 2252 mm Control Unit Brand BOSCH Model MTX CMP70 Ndedpex D Dklofx Aa Eof Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Ndsdoxyyynopfx Aa Eef Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Ndsdpfx Aajx D Em Ij Ejf Dimensions Machine Length 4165 mm Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Nsdpfxexyyyho Aa Ejdf Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg