Used Punching Crucible for sale (1,618)

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Cutting force: up to 2.5 MN (250 t) Working hours: approximately 38,000 hours Equipment / Additional information: Stripping system (stripping station) with centering frame Die-cutting plates (over 500 pieces) Tools Technical data Hjdpfxjxixhis Aa Esg Convertible stock: - paper: min. 80-90 g/m2 - cardboard: max. 2000 g/m2 - corrugated board B and E-flute: max. 4 mm Sheet size: min. 35 x 40 cm // max. 72 x 102 cm Cutting size : - with front waste max. 70,5 x 102 cm - without front waste max. 72 x 102 cm Cutting force: max. 2.5 MN (250 t) Running speed/hour: Depending on board quality and kind of job: max. 9000 sheets Pile height: - pallet feeder: max. 135 cm - universal feeder: max. 140 cm - delivery: max. 120 cm - delivery with pallet conveyor: max. 102 cm Power of main motor: 15 kW (20 HP) Connected load: 55 kWA Net weight: 22000 kg Gross weight: 25000 kg

Condition: good (used), 2 columns punching tool, cutting tool, punching tool, punch, punching die, punching die, column frame -Punching tool: 2 columns -Stroke: 40mm -Stamp: without accessories, see photos Hodpfxsmxpt Se Aa Eeg -Dimensions: 245/240/H240 mm -Weight: 30 kg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 101705 CE, total width: 2,450 mm, total length: 2,290 mm, total height: 1,970 mm, overall weight: 5,100 kg, Lift table punching machine; retractable bridge - Punching force 800 kN - Table dimensions 1600 x 800 mm Hjdpfx Ajx Nvtrsa Ejg - Weight 5100 kg - W x H x D approx. 2450 x 2290 x 1970 mm - Hydraulic oil approx. 125 l HLP 46 - Punching pad P178 NE, 10 mm thick - Special accessories: electrically adjustable support legs - Triggering via button or single-cycle safety light curtain - Technically inspected and fully overhauled - Condition as new - Colour RAL 7035 grey - Without hydraulic oil

Condition: used, Pneumatic C-frame press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Pneumatic press Serial No. 3437 Year approx. 1990 Pressing force 3.0 tons at 6 bar Hjdow A Srwepfx Aa Ejg Pressing force 2.6 tons at 5 bar Pressing force 2.2 tons at 4 bar Pressing force 1.6 tons at 3 bar Pressing force 1.0 tons at 2 bar Throat depth 150 mm Power stroke 6 mm Approach stroke 50 mm Total stroke 56 mm Ram surface Ø 100 mm Tool holder Ø 12 mm Maximum installation height 180 mm Table size 200 x 200 mm Compressed air requirement max. 6 bar - Pneumatic power cylinder with mechanical force amplifier (wedge-lever principle) - Press cylinder height-adjustable on column via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Space requirement (L x W x H) 440 x 230 x 750 mm Weight 127 kg Good condition

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Hjdpfx Aowrkcysa Eeg Projection                     750 with -Separate PT 700 / Leonard and Bauer Economic controller for positioning table for punching -Foot switch

Condition: good (used), Year of construction: 1991, 1 piece Hydr. hole punch MUBEA type HP 1000 / 760. Year of manufacture 1991 Punching force 100 tons With punching saddle for K 60-K260 and various tools, manually operated linear punching unit (raster rail 4 m) swiveling and digital display, carriage clamping and foot switch Hjdpjtv Hzvofx Aa Esg Dimensions L x W X H 1930 x 780 x 1980 mm Projection 760 mm Working height 1135 mm Hole 40 in 22 mm Stroke 0 - 70 strokes Number of strokes at full stroke 11 strokes Drive power 8.5 kW Weight 3800 kg 3600 kg Used, ready for operation

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Hodpfx Aasm Ak Hue Ejg Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2004, condition: ready for operation (used), Control Unit Brand FANUC Model 16I-PB Main Drive Punching force 300 kN Table Table load 150 kg Tools Number of station 15 Additional Equipment Programming software: JETCAM Hedpfxjx D Ri Ij Aa Ejg This Tecnology Tecnotransfer 15 SR was manufactured in 2004. It features a punching force of 300 kN and an installed power of 14 kW. The worktable accommodates parts up to 1500 mm × 3000 mm, weighing a maximum of 150 kg. It operates at 310–480 strokes per minute and includes 15 indexable tool stations. Runs on JETCAM software. Contact us for more information. Application Types Punching

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Hedpfjx Dtp Rsx Aa Ejg Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Inspection possible by appointment. I am happy to answer further questions.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm Hjdex Hzr Iepfx Aa Ejg throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Weight 295 kg

Condition: used, Year of construction: 1997, operating hours: 50,161 h, machine/vehicle number: 080163, Trumatic 600L 1600 for sale. Punching part is in good condition. Laser part needs to be looked after Hjdpeu Hxmzefx Aa Ejg

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Installation height: 500 mm Stroke length: 400 mm. Hjdpfswag Riex Aa Eog Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, functionality: fully functional, Year of construction: 1996, PEGA 358 CNC FANUC 1996 Power 30T Max thickness 6 mm Sheet size 2000 x 1270 mm Repositioning 4000 x 1270 mm Turret with 45 stations: 24A 12B 2C 1D 2E. Number of auto-index: 4 (2B, 2C) Ball table, light curtain safety barrier. Hodpfxsxrkk Uj Aa Eeg

Condition: ready for operation (used), Year of construction: 1999, General Data Hsdpfsx D Rg Hex Aa Eeg Measurements width 4100 Measurements depth 5700 Measurements height 2070 Machine weight 8000 Main Drive Maximum sheet thickness 6.4 mm Movement X-Axis Movement 1270 Y-Axis Movement 1270 - 2020 Workpiece Workpiece weight 75 kg This 3-axis TRUMPF TC2000R was manufactured in 1999, featuring a robust 1270 mm X and Y-axis travel, expandable to 2020 mm for larger sheets. It boasts a 22-ton punching capacity and a high-speed punching rate of up to 900 strokes/min. The machine includes a 9-station linear magazine with an automatic turret-style changer and full C-axis rotation. Ideal for high precision CNC punching. Contact us for more information about this machine. Application Types Punching

Year of construction: 2021, condition: good (used), Die-cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Sheet size min.: 300 x 350 mm Sheet size max.: 760 x 1,060 mm Max. machine speed: 8,000 sheets/h Max. die-cutting pressure: 2.6 MN / 260 t Materials and pile height (incl. pallet) Paper min.: 90 g/m² Cardboard/solid board max.: 2,000 g/m² Hodpfx Aevxu Smea Ejg Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Max. feeder pile weight: 1,500 kg Without blanking station Without MasterSet 161225ä

Year of construction: 1999, condition: ready for operation (used), Euromac hydraulic punching machine Type CX1000/30/2000 Hedpjpmt Ttsfx Aa Eeg Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Hodsxzk I Sjpfx Aa Eog sheet width 40 mm

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Hodowzyg Hjpfx Aa Esg

Condition: used, Pneumatic punching unit TÜNKERS, pneumatic power cylinder Hjdpfx Asxf Uqxja Esg Pneumatic punching bracket, punching frame, punching unit, punching frame Year of manufacture: 2019 Model No.: 141-1040F Punching frame No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper made of Vulkollan polyurethane elastomer Dimensions L x W x H: 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: used, Year of construction: 2001, SanGiacomo Press Model: T250 DM Pressing force: 2,500 kN Hsdpox Ex Dxofx Aa Ejg Stroke adjustment: 21 - 230 mm Ram adjustment: 120 mm Stroke rate: up to 75 strokes/min Ram surface: 2,300 x 1,090 mm Table surface: 2,300 x 1,090 mm Dimensions: 3,550 x 1,910 x 5,200 mm (LxWxH) Machine weight: 42,000 kg

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Hodsx E Adpepfx Aa Eeg

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,900 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 7,850 h, laser power: 3,200 W, punching diameter: 76 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, foot remote control, fume extraction, nozzle changer, quick-change device, safety light barrier, Laser TruFlow 3200, including LensLine with optimized standby Nozzle changing device Multitool drive system "Multishear" function "Multibend" function Tapping function High-speed "Marking" / "Ribbing" function Engraving function Rolling and deburring function Softpunch function Active Die Stripline Repositioning with pneumatic cylinders Vibration-dampened installation Chip conveyor with container Ball table work surface with brush inserts Blowing device SheetMaster (3000 x 1500) Automatic sheet separation system with lateral air blast Additional positioning guides for sheet size (2500 x 1250) Additional positioning guides for sheet size (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good part conveyor on punching side Good part conveyor on laser side Warehouse interface Hodpfx Aasx N Hyvo Eeg No. 21 RTC toolboxes incl. die holder plate

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 24550616, overall weight: 7,000 kg, total height: 1,900 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 1,200 mm, table length: 2,450 mm, AMADA ARIES 245 CNC Punching Machine - Punching force: 200 kN - Power connection: 11 kVA - Includes accessories such as various punches and punching tools Attention: The item must be collected definitively between 19 and 23 January 2026 on a specific date to be mutually agreed. Hodsxw Tt Nopfx Aa Eeg FCA D-76571 Gaggenau – loaded onto truck

Condition: new, Fully automatic sawing and punching or drilling in one machine! For use with Ø 500 or 550 mm saw blades, reversing device for a maximum cut length up to 4000 mm Säge-Stanz Automat Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching, based on the Profilma 502 model • Fully automatic operation and Hodpfx Aajx Hafto Eeg Säge-Bohr Automat Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 2510047, total height: 2,200 mm, total length: 8,000 mm, total width: 7,000 mm, table width: 1,300 mm, table length: 6,000 mm, controller manufacturer: FANUC, controller model: SERIES 18-P, AMADA VIPROS 2510 CNC Punching Machine Hsdoxw Trfjpfx Aa Ejg - Punching force: max. 196 kN - Equipped with a total of 31 turret stations - Includes a large lot of various accessories, such as punches and punching tools Note: The item must be collected on a binding date between 19 and 23 January 2026, to be mutually agreed upon. FCA D-76571 Gaggenau – loaded onto truck