Used Press Scrap for sale (12,340)

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm Hsdezvz Tbspfx Ac Tet - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Hsdpfx Acjztaxdo Tjt Capaciteit: 3600 x 150 ton BC55 CNC-besturing Bouwjaar: 2000 CNC-bombering Euro-gereedschapsklemming

Condition: used, 1x bending knife from a VOEST press brake Hedpfxey Tbvmj Ac Tst Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures.

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 115 kg Hodpfx Aszcgh Ejc Tst For further dimensions see pictures

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Hjdpjxf Na Ujfx Ac Tjt Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Hsdpey Tpr Asfx Ac Tet Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: used, Year of construction: 1991, pressure / t plate thickness / mm no. of strokes / Hub/min Condition: used The punching machine works perfectly. A functional video is available. Hjdjwgi S Nopfx Ac Tet

Condition: used, pressure 1000 t table length 2110 mm table width 1755 mm stroke 500 mm Hedpfxogrnaqs Ac Tet 18 min work height max. 380 mm 4 Punkt weight of the machine ca. 107,25 t dimensions of the machine ca. / m WILKINS & MITCHELL Trimming press with accessories Pressure force: 1000 t With discharge table and gear component Table area 2110 x 1755 mm Weights Stand: 47.1 T Table: 8.84 T Fumrungen: 1.72 T Drive: 26.47 T Compensating cylinder: 1.65 T Motor mount and guard: 2.04 T Pusher: 11.53 T Adjusting screws and bolts: 2.66 T Slide setting: 0.85 T Miscellaneous: 1.02 T Hydraulic ejector: 0.52 T Total weight: 107.25 tons

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Hsdpfjzifpgsx Ac Tst

Condition: used, Paper drilling machine, Hang 106 DTK4, $ spindle drilling machine, with various drill bits, 2 different speeds. In good condition. If you are interested, we would also be happy to provide you with information about other machines we have in stock. You are welcome to inspect the machine at our premises after arranging an appointment in advance. Hedpfxezwdg To Ac Tst

Condition: used, Year of construction: 1997, machine/vehicle number: 150069, Press capacity: 125 ton Ram stroke adjustable: 30 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 450 mm Free frontal opening L-R: 1.290 mm Free lateral opening F-B: 450 mm Table surface area : 1.250 x 800 mm Slide area: 1.250 x 650 mm Hole in table: 1.050 x 260 mm Number of strokes: 30 - 220 s.p.m. Hedpeuqdhwofx Ac Tet Table height over floor: 1.200 mm Required power: 39 kW Height over floor approx.: 3.800 mm Dimensions L x W x H: 3.500 x 2.200 x 3.800 mm Weight of machine approx.: 21,5 ton Standard configuration electrical overload protectionpneumatic clutch2 connecting rodsPLC Siemens S5 Extended machine accessories Strip shear AI 40max. shear force 10tSheet thickness max. 4 mmSheet width max. 400 mmCross section 600 mm2 Automation Kaiser Feeder KWV 400max. sheet width 400 mm

Condition: used, Year of construction: 1990, ONLY numbering unit from a GTO 46 or 52. Available for both machines. The image is a sample photo. Can be purchased as a package or as individual parts. If you are interested, we will also be happy to provide you with information about other machines in our inventory. Hodpfxszv U Ure Ac Tet You are cordially invited to inspect the machine at our facility after prior arrangement of an appointment.

Condition: used, Year of construction: 1982, Heidelberg GTO 46, 1 color, standard dampening system, +Version. 33 x 46 cm. If you are interested, we would also be happy to provide you with information about other machines in our inventory. Hedjzv U Ulspfx Ac Tst You are cordially invited to inspect the machine at our premises, subject to prior appointment.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 400 mm, table width: 1,200 mm, table length: 2,550 mm, clearance between the columns: 650 mm, total length: 1,400 mm, total width: 3,000 mm, total height: 1,930 mm, overall weight: 3,400 kg, This OTT veneer press from the Junior series, model 2512, with 6 pressure cylinders, is a classic hydraulic heated platen press for carpentry and woodworking. Hjdpfxezv U Hzj Ac Tot It has been completely overhauled by the Ott factory. 6 hydraulic pressure cylinders ensure extremely even pressure distribution over the entire surface, which is particularly important for demanding veneer work to prevent bonding errors. The use of 6 cylinders (instead of the often standard 4 cylinders for this length) minimizes the deflection of the press plates. This also allows for the pressing of smaller workpieces with high specific pressure without the plates warping. It is equipped with electric aluminum heating plates (gold anodized). The machine is connected and can be tested. Sale B2B without warranty/guarantee.

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Hsdpfx Acjzv Sbio Tst Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2.102.061, functionality: fully functional, pressing force: 135 t, stroke length: 210 mm, throat depth: 410 mm, controller model: Cybelec CybTouch 8W, working width: 3,100 mm, TECHNICAL DETAILS Press force: 135 t Max. working width: 3,100 mm Frame spacing: 2,500 mm Overhang: 410 mm Rear gauge depth: 750 mm Max. stroke: 210 mm Number of axes: 4 (Y1, Y2, X, R) MACHINE DETAILS Control system: Cybelec CybTouch 8W Power: 11 kW Tool holder type: European-style Punch holder: Standard Dimensions & Weight Hjdpozrmu Nofx Ac Tst Dimensions (L x W x H): 3,720 × 2,300 × 2,750 mm Shipping weight: 7,700 kg Shipping packages: 1 EQUIPMENT Tools CE marking Documentation

Condition: ready for operation (used), functionality: fully functional, pressing force: 70 t, table width: 495 mm, table length: 650 mm, TECHNICAL DETAILS Pressing force: 70 t Stroke, min.: 10 mm Stroke, max.: 90 mm Hodozrmm Sjpfx Ac Tst Table length: 650 mm Table width: 495 mm Column width: 400 mm MACHINE DETAILS Control system: CNC Dimensions & Weight Dimensions (L x W x H): 2,650 x 1,600 x 3,350 mm Dry weight: 9,000 kg Shipping packages: 4 pcs. EQUIPMENT Documentation

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 Hedpfx Acezr Inws Tst - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2013, condition: used, Membrane press Manufacturer: Columbus Hjdpfszu Amyjx Ac Tst Type: Vacuum forming Year of manufacture: 2013 Technical data - Working area: 1980 x 1350 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2015, condition: used, Membrane press Manufacturer: Columbus Type: Multimat Year of manufacture: 2015 Technical data - Press table: 3000 x 1400 mm Hjdpfx Aozu Ammoc Tet MULTIMAT - Membrane press table Mobile table with a pivoting heating hood and membrane frame High-performance vacuum pump TF 40, final pressure adjustable up to a maximum of 900 mb (9 t/m²) Pneumatically pivoting film fixing frame Usable membrane frame incl. highly elastic silicone membrane (700% elongation) Aluminum heating hood, fully insulated, continuously adjustable from 0 to 140 °C Digital differential pressure control Entire system (incl. vacuum pump) maintenance-free Electrical connection (incl. heating hood): 10 kW, 400 V, 50/60 Hz Dimensions: External dimensions: 3200 mm x 1600 mm Usable area (without membrane frame): 2800 mm x 1200 mm Usable area (with membrane frame): 2750 mm x 1150 mm Table / working height: 900 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Hsdpfx Aowz Et Sjc Tst Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm

Year of construction: 2018, condition: used, - Heating plate format (mm): 2850 x 1550 - Total pressing force (kN): 2400 - Maximum operating temperature: 180 degrees Celsius Vacuum press with 3 paternoster magazines Manufacturer: Wemhöner Type: Variopress - Basic 1000S Year of manufacture: 2018 Technical data Heating plate format (mm) 2850 x 1550 Design of the electric heating plate: Aluminum heating plate on top Total pressing force (kN) 2400 Maximum chamber pressure (bar) 6 Hjdpfezuz Eusx Ac Tot Maximum operating temperature 180 degrees Celsius Maximum batch or workpiece size (mm) approx. 2460 x 1180 Thermoplastic film as roll stock, film width: approx. 1430 mm Film thickness (mm) approx. 0.25 - 1 Chamber height (mm) max. up to 180 Connection values: Installed power (kW) approx. 46 Required air pressure (bar) approx. 8 Including 3 x paternoster magazines for film rolls Note: The technical data and descriptions are a copy of the order confirmation from that time. The data is for informational purposes only and is not binding.

Year of construction: 2013, condition: used, Membrane press table Manufacturer: Columbus Type: Vacuum forming Hjdjzuz Ehspfx Ac Tot Year of manufacture: 2013 Technical data - Working area: 1980 x 1350 - Must be connected to an external vacuum pump Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2012, condition: used, Membrane press Manufacturer: Columbus Type: Vakuform Sonder Year of manufacture: 2012 Hodpfx Acozuz Ebe Tjt Technical data - Must be connected to an external vacuum pump - 750 watts, 230/380V, 50 Hz - Boiler capacity: 200 l - Suction capacity: 25 m3/h - Vacuum: max. 0.85 bar - Working area: 2000 x 1350 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 1996, condition: used, Baling press Manufacturer: HSM Type: 55.1VL Year of manufacture: 1996 Technical data Hedpfx Acszuz D Ro Tst - 4.0 kW motor - 18 t pressing force - 400 V / 50 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.