Used Press Scrap for sale (12,619)

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm EQUIPMENT No information available regarding accessories. Ljde Aa Nahspfx Abysah

Condition: excellent (used), stroke length: 215 mm, power: 11 kW (14.96 HP), pressing force: 150 t, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, safety light barrier, Bystronic PR 150 Ton x 3100mm 6 Axis Back Gauge. X1. X2. R1. R2. Z1. Z2 Hydraulic Upper Tool Clamping Hydraulic Crowning Hydraulic Hemming table ( Dutch Folding ) 100mm Extra Daylight Motorised Laser Guarding Cybelec ModEva 12 Colour Graphic Control Lajdpfx As Aa A Urebyeh Full Upper & Lower Tooling Set of Manuals Can be viewed under power We can load to suitable transport

Condition: used, Year of construction: 2013, machine/vehicle number: 201364, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 86 t, stroke length: 300 mm, table width: 3,000 mm, table length: 300 mm, table height: 400 mm, oil tank capacity: 16 l, total length: 1,500 mm, total width: 3,300 mm, total height: 2,000 mm, Equipment: CE marking, This used gluing press is fully functional and has been inspected in our workshop. The machine is specifically designed for pressing glued wooden parts into solid panels, table tops, and furniture components. Thanks to its vertical design, the available floor space is used optimally while maintaining a high production capacity. The press is equipped with six hydraulic cylinders that ensure even pressure distribution across the entire workpiece. With a total pressing force of up to 10 kg/cm2, the machine delivers consistent and high-quality pressing results. The robust steel construction guarantees years of reliable use, even under demanding production conditions. Laedpfx Aoz U R Hmsbyeh This used machine is in good technical condition and represents an attractive alternative to a new machine. As a result, you benefit from a reliable production solution at a competitive investment.

Condition: used, Year of construction: 1997, machine/vehicle number: 835, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 890 mm, table length: 1,460 mm, table height: 600 mm, total length: 1,800 mm, total width: 2,120 mm, total height: 3,550 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm For sale is an oil-hydraulic 4-column forming machine from August Luigart & Sohn GmbH u. Co. KG with a maximum pressing force of 200 T. The machine has a table size of 1,460 × 890 mm, a maximum installation height of 800 mm, and a stroke of 400 mm, making it suitable for forming, stamping, straightening, and assembly work in industrial applications. ##### Technical data + Information: Oil-hydraulic 4-column forming machine – 200 T – 1,460 × 890 mm ==== General information - Reference ID: TPT-08 - Manufacturer: August Luigart & Sohn GmbH u. Co. KG - Design: Oil-hydraulic 4-column forming machine - Model: 4 SPY 200 SO - Machine number: 835 - Year of construction: 1997 - Pressing force: 200 T - Rated force: 2,000 kN - Table size (working area): 1,460 × 890 mm - Table height: 600 mm - Open height: 800 mm - Installation height: 800 mm - Stroke: 400 mm - Ram width: 1,460 mm - Lateral passage: 450 mm - Total height: 3,550 mm - Total width: 2,120 mm - Total depth: 1,800 mm - Total weight: 12,500 kg - Max. upper tool weight: 2,500 kg ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 300 mm - Piston rod diameter: Ø 270 mm - Guide column diameter: Ø 160 mm - Stroke: 400 mm - Max. working pressure: 285 bar - Return speed downwards: 200 mm/s - Return speed upwards: 251 mm/s - Pressing speed: 37–11 mm/s - Setting speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 32.5 kW - Oil tank: approx. 850 l - Hydraulic oil: HL / HLP ISO VG 46 - Oil filter fineness: < 25 µm - Max. oil temperature: 60 °C - Vibration damper: EFFBE LM 7-100 - Foundation according to manufacturer's specifications required ==== Tooling - Number of T-slots: 5 - T-slots: T22 M20 according to DIN 650 ==== Control - Control: no PLC - Control panel: on the frame - Light curtain / light barrier: available - Two-hand operation: available ==== Safety - Decay time: 82 ms - Decay distance: 164 mm - Safety distance: 13 mm - Protective grid: available - CE-compliant design Ledpfx Aj Ad Haysbyjah ==== Electrical connection - Operating voltage: 415 V - Power supply: 3PEN - Frequency: 50 Hz - Conductor cross-section: 25.0 mm² - Fuse rating: 80.0 A - Rated current: 64.2 A - Control voltage: 230 V AC - Valve voltage: 24 V DC ==== Environmental conditions - Ambient temperature: +5 to +40 °C - Relative humidity: 30–95 % (non-condensing) - Installation altitude: max. 1,000 m above sea level - Noise level: < 70 dB(A) ##### Application areas: Forming, stamping, straightening, embedding, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Oil-hydraulic 4-column forming machine, 4-column forming machine, hydraulic press, August Luigart press, 4 SPY 200 SO, 200 T press, 200 ton press, forming press, stamping press, straightening press, embedding press, industrial press)

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, pressing force: 100 t, clearance between the columns: 2,600 mm, Make: Gasparini Model: PSG 100 Lsdpfxe Aa Dc Dj Abyjah Year of manufacture: 1994 Type: Press brakes Control: CNC Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 Lodpo Adu Ulsfx Abysah PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: used, Year of construction: 1994, machine/vehicle number: 10353, functionality: fully functional, pressing force: 153 t, stroke length: 700 mm, table width: 1,300 mm, table length: 1,800 mm, total width: 4,870 mm, total height: 4,830 mm, overall weight: 27,000 kg, Equipment: documentation/manual, Hydraulic double-column press – 153 T – 1,800 × 1,300 mm For sale is a hydraulic double-column press from Maschinenfabrik Exner GmbH & Co. KG with a maximum pressing force of 153 T. The machine has a table size of 1,800 × 1,300 mm, an open height of 1,200 mm, and a stroke of 700 mm, making it suitable for forming, straightening, pressing, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic double-column press – 153 T – 1,800 × 1,300 mm ==== General Information - Manufacturer: Maschinenfabrik Exner GmbH & Co. KG - Design: Hydraulic double-column press - Model: EX SBR 150 - Machine number: 10353 - Year of manufacture: 1994 - Pressing force: 153 T - Rated force: 1,500 kN - Table size (usable area): 1,800 × 1,300 mm - Open height: 1,200 mm - Stroke: 700 mm - Overall height: 4,830 mm - Overall width: 4,870 mm - Total weight: 27 T - Basement required: no ==== Hydraulic Cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 320 mm - Stroke adjustment: 300 mm - Stroke rate: 300 strokes/h - Retraction force: 175,000 N - Max. working pressure: 320 bar ==== Hydraulics & Drive - Main motor: 30 kW - Auxiliary hydraulics: 15 kW - Cooling motor: 7.5 kW - Stroke adjustment motor: 1.5 kW - Fan motor: 0.18 kW - Main motor speed: 1,460 rpm - Total power consumption: 46.68 kW - Oil tank: 1,300 l - Oil type: ISO VG 46 - Air-oil cooler: yes - Lubrication pump: Motor-driven lubrication pump ==== Tooling - Number of T-slots: 4 - T-slot width: 22 mm - T-slot spacing: 500 mm - Thickness of clamping plates: 150 mm - Additional clamping plate: yes - Tool protection / tool securing: yes ==== Guidance - Guidance: 8-way - Ram locking / catch mechanism: 2-way ==== Control System - Control system: PLC / programmable control console - Operating panel: Control console ==== Safety - Snap-off damping - Follow-up travel: 48 mm - Follow-up time: 135 ms - Safety distance: 216 mm - Light curtain / light barrier - Protective grating - Separate control cabinet ==== Electrical Connection - Operating voltage: 400 V - Frequency: 50 Hz ##### Laedpfx Aj Advkuobyoh Application areas: Forming, straightening, pressing, assembly operations, toolmaking, mold making, mechanical engineering, metalworking, steel construction, contract manufacturing, heavy industry, series production (Hydraulic double-column press, double-column press, hydraulic press, EXNER press, Maschinenfabrik Exner, EX SBR 150, 153 T press, 153-ton press, forming press, straightening press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety directive NR 12. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Recorded operating hours: 376 h Ljdpez Iluqjfx Abyjah External reference: Alesco - Lot 76

Condition: excellent (used), Year of construction: 2017, Ref:11156 . 2017 Schmedt Präleg XL Casing-in Pressing Machine For casing-in a variety of thin to thick books into flexible or hard cases. Special features: • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks. Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Ljdoz Hbuqjpfx Abyjah Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230 V + compressed air.

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 697/2, Equipment: 4th hydraulic function, Hounsell Engineering 50 Tonne 4-Column Hydraulic Press – 1997 We are pleased to offer this Hounsell Engineering Ltd (UK) 50-tonne 4-column hydraulic press, manufactured in 1997. A substantial, British-built industrial hydraulic press with heavy-duty construction, previously used in a production environment and now available for sale due to surplus requirements. Suitable for a wide range of pressing, forming, assembly, fabrication, maintenance and general engineering applications. Machine specification: Manufacturer: Hounsell Engineering Ltd, UK Type: 4-Column Hydraulic Press Rated capacity: 50 tonnes Year of manufacture: 1997 Machine / Serial No.: 697/2 Stroke: 200 mm System pressure: 250 bar Pump motor: 5.5 kW Electrical supply: 415 V Control voltage: 110 V Hydraulic fluid: Texaco HD 32 Construction: Heavy-duty industrial steel Condition: Very good used condition The press was in service prior to removal and is being offered for sale as surplus equipment. With a rated capacity of 50 tonnes, the machine is capable of generating approximately 500 kN of compressive force, making it suitable for a broad range of industrial and workshop applications. Condition & Inspection The machine is offered in good used condition. Prospective purchasers are welcome and encouraged to inspect the press before purchase to satisfy themselves as to its condition, specification and suitability for their intended application. Sold as seen. No warranty is given or implied. Lodpfxez Ib R Ie Abyeah Collection & Loading Location: Kent, England, UK Collection only due to the size and weight of the machine. Loading assistance may be available by prior arrangement. Further photographs and information can be provided, including serial plate details, overall dimensions, weight and loading arrangements. A good opportunity to acquire a substantial 50-tonne industrial hydraulic press at considerably below the cost of a comparable new machine. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks, Search terms: Hounsell Hydraulic Press, 50 Tonne Press, 4 Column Press, Hydraulic Workshop Press, Industrial Press, Engineering Machinery, Pressing Machine, Forming Press, Manufacturing Equipment, Fabrication Machinery.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, TECHNICAL DETAILS General Information Machine Type: Single-column eccentric press Machine Weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke Rate: 120 strokes/min Stroke and Operating Data Overhang: 250 mm Stroke: 8–100 mm Installation Height: 330 mm Ram Adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping Plate: 700 × 480 mm Die Opening in Table: 240 mm Die Opening in Clamping Plate: 110 mm Ram Clamping Surface: 450 × 280 mm Tilting Design Ljdps Achxbsfx Abyjah Tilting Stages: 4 Die Opening to the Rear: 325 × 500 mm Die Opening Downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space Requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Piece counter Various accessories

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Lasdpoz S D Tujfx Abysh Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning

Year of construction: 1986, condition: good (used), functionality: fully functional, machine/vehicle number: 540, SANDT 540 – 50 Ton Hydraulic Double-Column Press – 1350 × 600 mm Good quality German-built SANDT 50-ton hydraulic press, now available from our premises in Kent, England. A substantial industrial machine offering a large 1,350 × 600 mm working area, approximately 500 mm maximum stroke and 680 mm installation height. Suitable for a wide range of industrial cutting, die-cutting, punching, forming and manufacturing operations. Specification: 50-tonne press force 1,350 mm column width 1,350 × 600 mm table 1,350 × 600 mm ram Approx. 500 mm max. stroke Approx. 680 mm installation height 400 V Safety light curtain Separate hydraulic power pack Separate electrical cabinet Approx. 3,000 kg Approx. dimensions: 3,000 × 1,200 × 2,800 mm Manufacturer: SANDT Model: 540 Year: 1986 Machine No.: 808673-72951 Lasdpfx Abjz Icrtoyeh Price: £5,000 or best offer Machine can be inspected in Kent, England. Buyer to arrange collection/transport. Please contact via the links within for further details, photographs, or to arrange an inspection. Many Thanks,

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Laedpfx Abj Adu Ryjyoh Machine type: Hydraulic press PRESS Pressing force: 100 t Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 12,000 kg

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Lodpfs Aa Ndyex Abyjah Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Lajdpj Ad H Ttsfx Abyjh Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm stroke 100 mm table-size 500 x 400 mm max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm total power requirement 5,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Laodpfx Abs Ad Rlmjysh Fabricated construction with light guard and two hand switch.

Condition: used, total length: 3,400 mm, total width: 1,700 mm, total height: 1,950 mm, Year of manufacture: 2026 Colour: White Empty weight: 2.000 kg - Details: - └ Description: New - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: Pro.b 301365530.166 - Operating hours: 0 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 535 - Total stroke [mm]: 535 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 0 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 60 - Total pressure [Ton]: 70 - Options: Mylar protection - Voltage [V]: 400 - Current consumption [A]: 5 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1700mm x 1950mm (l x w x h) Lajdpo Abt Swsfx Abyoh - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1976, machine/vehicle number: 8841, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressing force: 25 t Pulling force: 10 t Total power requirement: 11 kW Machine weight: approx. 3 t Ledpfj Aa Nynox Abyjah Stroke and working data Overhang: 260 mm Stroke: 500 mm Pulling stroke: 200 mm Table Table size: 500 × 500 mm Dimensions Space requirement: approx. 1.40 × 1.10 × 2.80 m EQUIPMENT Very robust design Two-hand operation Analog pressure gauge

Condition: used, Year of construction: 2015, input current: 70 A, input voltage: 400 V, We offer this used KBA GENIUS 52 UV offset printing press, year of construction 2015. Manufacturer: KBA Model: GENIUS 52 UV Identification number: MC4U00-000173 Current number: 178 Manufacturing year: 2015 Ingress protection rating: IP20 Voltage: 400/230 V Current: 70 A Apparent power: 48400 VA Lodpfx Aez D En Nebyjah Frequency: 50 Hz Air pressure: 7.0 bar Air consumption: 1500 l/min Weight: 7250 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 56979, overall weight: 7,500 kg, total length: 5,000 mm, total width: 1,200 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, pressing force: 135 t, type of input current: AC, machine is functional ok, from down linear tool is one channal damage. perfect machine for starters or when a company have only periodic press jobs. Lsdpfx Abe Aarbhjyjah we sale out by fact that we need the space. machine is unther still on power

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Ljdpfx Aj Aa Ntnebyjah Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L Ledpfx Aez Sva Hjbyeah - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: ready for operation (used), Year of construction: 2004, Pack press Signode with plastic strapping Ljdpfxszca Uxo Abyoah

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages Laodpfx Abj Abbd Ioyjh - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.