Used Preform for sale (102)

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Ijdsv U Ni Sopfx Aacoih Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder VT 3010 Iisdpfory Iiwsx Aaceh

Year of construction: 2015, condition: ready for operation (used), Injection Unit Iiodpewzc S Sofx Aacjh Shot weight 2424 g PET Media Power consumption 492 Wh/kg PET Additional Equipment Mold Dehumidifier: Incl. hood, spare parts package, piping Conveyor Belt: Two-sided preform filling system for cartons/grid boxes Injection Unit Shot weight 2424 g PET Media Power consumption 492 Wh/kg PET Additional Equipment Mold Dehumidifier: Incl. hood, spare parts package, piping Conveyor Belt: Two-sided preform filling system for cartons/grid boxes This Husky HPETL230E-RSE95D-95 was manufactured in 2015. It is an all-electric injection molding system with a maximum throughput of 390 kg/h PET and a max shot weight of 2424 g PET. The clamping unit is fully electric with a toggle drive, and it features an integrated control system for additional equipment. Consider the opportunity to buy this Husky HPETL230E-RSE95D-95 electrical injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 2004, functionality: fully functional, NP 684 | COMPLETE BOTTLING LINE PET KRONES 30,000 BPH Product: Still water (with neck modification can also process sparkling) Capacity: - 30,000 BPH with 0.5L bottles - 30,000 BPH with 1.5L bottles - 22,000 BPH with 2L bottles Total working hours: 56,000 Preform Tipper M. Tanner AG: - Model: VZT-4010 - Year: 2004 Preform Washing System Krones: - Year: 2004 High Pressure Compressor Ateliers Francois: - Model: 20G282 - Year: 2004 - Pressure: 40 BAR PET Blower Krones: - Model: Contiform 20 - Year: 2004 - Number of cavities: 20 - Molds not included - Complete with preform feeder and orientator Cap Elevator and Orientator Gassner: Iiodsxl R Uaopfx Aaceh - Year: 2004 - Supported cap types: Plastic pre-threaded cap - Type: Mechanical Cap Elevator and Orientator Gassner (Sport Cap): - Year: 2004 - Supported cap types: Sport cap - Type: Mechanical CIP Steinecker: - Model: Media - Year: 2004 UV Sterilization Station WEDEDCO: - Year: 2004 - Water treatment by UV rays KRONES Monoblock (filler and capper): - Model: Isofill - Year: 2004 - Rotation: Counterclockwise - Electric height adjustment Filler: - 88 valves - Filling type: Isobaric - Valve type: Mechanical - With degassing Capper: - 22 heads - Supported caps: Pre-threaded plastic; Sport Cap - Distribution: Pick & Place system Bottle Inspector Heuft: - Model: HBBVXTXXX - Year: 2015 - Bottle flow: Right to left - Inspection: Overfill, underfill, cap presence, cap misalignment Bottle Conveyors Krones: - Year: 2004 Labeller Krones: - Model: Contiroll - Year: 2019 - Rotation: Clockwise - Electric head adjustment - 18 mechanical cam heads - 1 roll-fed station - wrap-around label - Label presence control Shrink Wrapper Variopac: - Year: 2004 - Execution: Film only Wrap Around Packer Krones: - Model: Wrapapac - Year: 2004 - Hot glue system: Nordson - Packaging formats: 12x1.5L, 24x0.5L - Hours used: 1000 Bundle/Box Conveyors Krones: - Year: 2004 Handler Comag: - Model: H 55/2 - Year: 2004 - Double lane Palletizer Krones: - Model: Pressant - Year: 2004 - Package types: Bundles, boxes - Type: Push - Pallet warehouse - Interlayer system - Dual infeed Pallet Wrapper Robopac: - Model: HELIX HS 30 - Year: 2004 - Wrapping type: Rotating arm - Pre-stretch system

Condition: used, Stretch blow molding machine from Etek Iedpfskucxlox Aacsih ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: ready for operation (used), COMPLETE PET BOTTLES ASEPTIC STILL/GAS FILLING LINE, YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH THE LINE INCLUDES: PREFORM DEPALETIZATOR BLOWING MACHINE KRONES CONTIFORM S16 BOTTLE AIR CONVEYOR BOTTLE RINSE, STERILIZATION, FILLING UNIT, KRONES CAF VODM 100, 60 RINSER, 80 FILLERS 28mm CAP STERILIZATION UNIT KRONES LABELING MACHINE CAPACITY 35.600 BPH LASERCODER BOTTLE CONTROLLER Iisdpfx Aajxm Rwqecjh CONVEYORS SYSTEM FOIL SHRINK MULTIPACK, KRONES TWINPACK APPLICATOR PALLETIZER KRONES ROBOT 3A BELADER WITH PALETT MAGAZINE PALLET BINDER UNIT HB PALLET CODER UNIT EAN 128 RULAND TUBULAR STERILIZATOR WITH CIP UNIT STERITANK ROTH, CAPACITY 11 TONS CARBONISATION UNIT RULAND ECOLAB HYGIENE CENTRE RULAND STERILE WATER PLANT THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION.

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Iiedpet Eu Azefx Aacoh

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Isdpfewzvl Sex Aacjih

Condition: used, Year of construction: 2000, functionality: fully functional, Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Iijdpfx Ajuggpzoacjh Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: used, Year of construction: 2010, Bottling Line: Krones CSD Line Year of Manufacture: 2010 Suitable for: Carbonated Soft Drinks Currently Running: Apple Juice with Water and CO2 Container Sizes: PET 0.5 L – PET 1.0 L – PET 1.5 L Neck Formats: PCO 1810 – 28 mm / PSO 28 mm – 1810 – 1881 (Short Neck) Capacity: • 24,000 bottles/hour (0.5 L) • 18,000 bottles/hour (1.5 L) Control System: Siemens Simatic S7-series PLC Operating Hours: approx. 40,000 Krones VarioClean F AUT: Fully automatic CIP system, 4 x 5,000 L, 30 m³/h GEA TDS Processing Plant: Includes flash pasteurizer, mixer, carbonator, degasser, and tanks Preform Hopper and Feeder Conveyors: Iiodsxfg Ebjpfx Aacoh • Preform Feeding System: Krones Contifeed RS • Preform Cleaning Unit: Prejet Linear Cap Feeding System: Gassner, includes cap rinsing and sterilisation Blow Moulder: Krones Contiform S12M Ultra Clean Volumetric Filler: Krones 86-22 (Volumetric VODM-PET) with capper Filler Block Cleaning: Krones VarioDos ultra clean Date Coder: Domino DDC 3 (laser) Filling Level Inspection: Krones Checkmat Bottle Conveyors: Krones SYNCO S Bottle Leak Tester: Krones Flowliner Labelling Machine: Krones Contiroll OPP 720-15, double roll feed, hotmelt glue applicator Label Inspection: Krones Checkmat 731 EM Shrink Packer: Krones (Kettner) Variopac TFS 30 (2003) Package Conveyors: Krones Multico S Handle Applicator: Twin Pack Pack Coding: Leisinger Jet 3 (inkjet) Palletiser: Krones Robopox Modulpal (year 2016) Reference Code: NP 647

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Iiodpfx Ajg Ailcsacsh Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 2015, condition: ready for operation (used), Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. Total system dimensions X/Y/Z: approx. 24m/13m/5.5m. Including drying unit, mold dehumidification, paint mixing units and T-conveyor belt. Documentation available. On-site inspection is possible. Iiedpsw Az Riefx Aaceh

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor. Iiodpfxswizc Ej Aacsh

Condition: used, Year of construction: 2002, Overview  This stretch blow moulding machine was manufactured in 2002 by France-based SIDEL. It is suitable for producing PET bottles in various formats and is immediately available for sale. The machine includes a preform tipper, container, and feed system. Technical data Capacity: 24,000 b/h Formats: 0.25 l, 0.5 l, 1.0 l, 1.5 l PET bottles Neck finish: 28 mm PCO Voltage: 400 V Frequency: 50–60 Hz Scope of Delivery  Sidel SBO 20 Series 2 blow moulder Preform tipper Container system Preform feed system Ijdowiiy Eepfx Aacsih

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Isdpewh U Avofx Aaceih

Condition: used, Year of construction: 2013, Overview  This complete filling line consists of the machines below. It was stopped in 2024 and is immediately available. Due to regular maintenance and several upgrades even the older machines of this line are in good technical condition and the supply of spare parts is secured.  Details  PET line up to 30,000 bph in 1.5 L. Neck 29/25 Line consisting of: Preform rinser Krones, 2016 Blower Sidel, 2002 Gangloff Scoma filling machine, 2013 Capper, 2013 Caps Sidel, 2013 Commissioner Heuft, 2001 CIP Sovotec, 2011 Pallet conveyor, 2013 Inspector Krones, 2013 Labeling machine Krones, 2006 Domino bottle coder, 2014 Shrink-wrapping machine Ocme, 2013 Twinpack handle applicator, 2012 Conveyors NTS, 1997/ overhauled 2012 Gebo bottle conveyor, 1997/ completely overhauled 2012 Accumulation table, 2013 Palletizer Ocme, 2014 Labeling machine for packs, 2011 Labeling machine for packs 2, 2011 Conveyor packages and divider SES, 2003 film Aetna, 2014 film Aetna, 2014 Packlift Ambaflex, 2013 Iodovuqtlopfx Aacsih

Condition: used, Year of construction: 2002, Overview This automatic heat sealer for preformed containers is manufactured by INAVEN MASCHINEN AG (VC999), Model TS1200 N. Specially designed for packaging in vacuum heat-sealing format and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transportation. It automatically performs the MAP cycle, thermosealing and gas injection, perfect cutting of the film and automatic collection of the film. Technical details Length: 4400 mm Width: 870 mm Height: 1790 mm input belt 2700 mm output belt 1120 mm  power 6 kW; power supply 400 V, 50 Hz Scope of delivery tray sealer | VC 999 | TS 1200 | 2002 Iodpfx Aetzg H Rsaceih

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Iiedpfxjplgmbs Aacsh

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Iisdpfx Aaju Nph Ijcjh

Condition: used, Year of construction: 2005, Overview This blowmoulder was manufactured in 2005 by Italian manufacturer SMI. Techn. Data 14 cavities Formats: 0,5 – 2,0 l, round, squared Scope of delivery Blowmoulding machine SMI SR14 Chiller ASKI year 2005 Preform tipper Preform feeder Iijdpfx Aem U R Dhsacsh

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Iiedstuyq Aopfx Aacsh

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Iiodpfx Asrqar Seacsh

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Iisdpfx Aajtr R Tkocjh

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Iiodpfx Aorkgy Uoaceh

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Iedpfx Aasnpbhvjcoih