Used Portal Milling Machine for sale (84,779)

Condition: good (used), Year of construction: 2006, CNC Portal Flame Cutting Machine Manufacturer: Messer Model: Easytherm 4600 Year of manufacture: 2006 Control: Global Control Working area: 3 x 9 m No table included!! Table can be offered upon request! Track length: 12 m with HEB beam 1 oxy-fuel torch ALFA 1 plasma torch with Kjellberg 160i plus power source Incl. marking Torit filtration system Own technicians available for installation, commissioning, and training! All spare parts in stock. Tedpfx Aoivz A Rshujf 21225ä

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Tsdpfxjxwdygo Ahujf Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Tedpfxoghtvao Ahuef Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Year of construction: 2010, condition: good (used), Double mitre saw DGS400 for 45° (frame) cuts with digital left stop. Drilling or dovetail milling machine T20NC for frame assembly. 4 motors at 1.1 kW. Speed: 26,500 rpm. Direction of rotation: right and left. Milling cutter / drill bit. Tedpfsxxytxox Ahujf

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Tsdpfjv Sut Rox Ahusf

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, BRAND NEW BED-TYPE MILLING MACHINE WITH ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) Tjdpfjff Hz Hox Ahuef IKZ: Internal coolant supply – 36 bar Rotary Table: 1600 x 1200 mm – Dual-motor drive system Additional Equipment: ATC tool changer with double gripper, 40 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1995, Universal CNC milling machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Tjdpfx Ahev Rxa Sjuef Travels X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece sensing) Vertical-horizontal milling device Quill Coolant unit Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Todpfow E Tzrox Ahuof Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 25 kW Movement X-Axis Movement 3000 mm Z-Axis Movement 900 mm Y-Axis Movement 865 mm Table Table load 10000 kg Tedpfx Ahjxyl Rlsuef This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, The machine is in very good condition and comes from a training workshop. Todpjwx H Nvefx Ahujf Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA and 2 Accessory Cabinets from University Ownership, Excellent Condition Technical Data: Tsdpfx Aoxxzl Nohuof >> Machine No.: 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting, and rotating table >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extendable vertical and horizontal quill - SK-40 >> Drawbar system S20x2 >> Weight approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Central lubrication system 2 accessory cabinets with tooling: collets, horizontal and vertical tool holders, clamping tools, dividing head with 3-jaw chuck, vise, tailstock, faceplate, additional small swiveling, tilting and rotating table, rotary table, tailstock, vise, and much more About the Machine: Offered here is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets filled with accessories. Previously owned by a university. An oil change has been carried out. Mechanically and electrically tested. The digital display makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP3 under power on site.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, FACTORY NEW BED MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply, 36 bar Additional Equipment: Tsdpfx Aeh Ekrtjhusf ATC tool changer with double gripper, 24 positions Double hinge belt chip conveyor (longitudinal), one front and one rear 4th axis preparation (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Todpfxsv Rpr Se Ahuof Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: used, Year of construction: 2006, x-travel 560 mm y-travel 300 mm z-travel 420 mm table-size 1055 x 240 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 1550 U/min total power requirement 5,5 kW weight of the machine ca. 1,3 t dimensions 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display - Chip guard Tedpfxsxfb Hts Ahuof - Coolant system - Machine light - Chip tray

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Todpexl Hyxjfx Ahuef Model TNC 415 This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machine's transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2014, operating hours: 28,446 h, functionality: fully functional, machine/vehicle number: MV0061-000288, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Todsv Du A Aspfx Ahuef Machine comes with various BT40 Tool holders

Condition: good (used), Year of construction: 1996, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm Tjdpfjxvraxex Ahuef -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW FLOOR TYPE MILLING MACHINE Control and Motors: Two HEIDENHAIN TNC 640 digital CNC controls – one at the machine’s front, one at the rear in the cabin HEIDENHAIN package (motors, measuring systems and portable handwheel) Additional equipment: Tool changer with double gripper, 60 stations Double hinge-belt chip conveyor (longitudinal), one in front and one at the rear Tjdpfxevrv Suj Ahuef Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table Tsdpfsgqkc Nex Ahuof without filter

Condition: good (used), - Pneumatic workpiece clamping devices - Pneumatic tool clamping device - Protective cover - 400V Tedpfjxylxvex Ahuef

Condition: used, Year of construction: 2013, operating hours: 3,064 h, Field of application: Construction Applicable material: Asphalt Serial number: 10188210xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20327 Specifications: - 2013 model - 3064 hours - Deutz engine - Hydraulic lift and lower - Milling width of 60 cm Todpfx Ahswi Rc Ujuef - Lower and raise function on the roof - Ready for delivery Description: We have a 2013 Bomag BM600/15 Asphalt milling machine for sale. Everything works as it should according to the owner. Services have been carried out at our own workshop. The milling width is 60 cm. Errors and defects may occur. Ready for delivery Hours: 3064 Own weight: 6800 Model: BM600/15

Condition: excellent (used), Year of construction: 2012, operating hours: 37,513 h, functionality: fully functional, machine/vehicle number: MV0061-000073, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Tedpfx Ahsv Duy Ieuef Machine comes with various BT40 Tool holders

Condition: used, x-travel 400 mm y-travel 400 mm Tjdoxv D Uzepfx Ahusf z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 4,000 rpm, Haas TM-3HE CNC Milling Machine in great working order. The machine is currently in storage but can be powered up and demonstrated as required. The tooling shown in the pictures is included in the sale. Tjdpsxnmzusfx Ahuef

Condition: excellent (used), Year of construction: 2013, operating hours: 29,083 h, functionality: fully functional, machine/vehicle number: MV 0061-000242, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Todpfev Du Avex Ahujf Machine comes with various BT40 Tool holders