Used Polystar 100 Ge for sale (48)

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Kwedew U H Sbepfx Adtjt Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Year of construction: 2015, condition: good (used), GE Healthcare Xuri Cell Expansion System W5 with Perfusion Module and CO2 Mixer Kodpfxjn I Uqrs Adtswt Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 2015, Extendable superstructure: Yes Kjdpfjxix Agjx Adtowt Please contact Theo Lelie for more information

Condition: excellent (used), Year of construction: 2022, operating hours: 1,901 h, functionality: fully functional, High-precision Swiss-type CNC lathe in excellent condition. Ideal for small and medium-sized precision parts. Equipped with several options: • Direct-drive rotary guide bushing • High-pressure coolant system • Chip conveyor with cart • Work conveyor • Fanuc chip breaker function • Drill breakage sensor • STG-320 hydraulic magazine-type bar feeder (3m, Ø3–20 mm) Perfect for production of precision components for electronics, automotive, medical and general mechanical industries. Kwodpjtq Hufofx Adtet For sale due to changed production needs. Year: 2022 Condition: Excellent / Low use

Condition: like new (used), Year of construction: 2016, General Electric ( GE) power plant with TOTAL power - 1.500 MW Kwodpex N A Rdofx Adtjt NEVER USED! NOTE - frequency is 50 Hz 2x 750MW Gas Based CCPP ( 4x gas turbines PLUS 2x steam turbines ) Please contact us for more details. Thank you!

Condition: used, functionality: fully functional, In this offer you are purchasing a mint condition resting ECG "GE CAM Connect 14" Object of sale: 1 x GE CAM Connect 14 with the following features: Mobile resting ECG 12 or 15 leads Easy to integrate into MUSE and PACS systems With automatic arrhythmia detection DICOM-compatible Condition: This is a used device which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Kwjdpfewr Anbex Adtot Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, Year of construction: 2018, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print stainless and titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Year of construction: 2018 Condition: used Functionality: Fully functional Price 79000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Ksdpfxovmpq Te Adtewt Cathode type Single crystalline Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Condition: used, empty load weight: 10,850 kg, overall weight: 65,000 kg, axle configuration: 4x2, first registration: 06/2005, tire size: 235/75 R17,5, wheelbase: 1,310 mm, color: yellow, Equipment: ABS, Drum brake Payload: 54,150 kg Air-lift suspension Telescopic up to 6,300 mm Max. total length: 19,450 mm Extendable to 3,000 mm Gigant axles 3rd and 4th axle steered trailing axles Lifting and lowering device Ksdsxuf Dnepfx Adtewt Errors excepted

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights Kedswt Iylepfx Adtjwt * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Kedpfxswx Dbpo Adtjwt Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, maximum load weight: 40,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles, both immediately and soon available, on our website. Below is an excerpt from the equipment features. The full equipment specification is available upon request. Chassis: * Welded construction made from high-quality steel profiles in lightweight design with through crossmembers * Rear inclined section approx. 630 mm in length and headframe lowered by approx. 100 mm * Excavator arm recess at the rear of the chassis, approx. L 3,750 x W 640 x H 290 mm, between the longitudinal beams with steel floor Wheel recesses: * In the low bed approx. 1,700 mm in front of the first axle a pair of wheel recesses (support/surface under the ramps) approx. H 190 x L 1,550 x W 800 mm, including flat aluminum (climbing aid) * Additionally, between the first and second axle, a pair of wheel recesses approx. H 190 x L 1,080 x W 800 mm, including flat aluminum (climbing aid) * All wheel recesses with aluminum covers and steel checker plate floor Kingpin: * 2-inch kingpin Landing gear: * 2 x 12 t drop legs with aluminium compensating foot Rear support: * Two adjustable drop legs Axles: * 3 x 10 t air-suspended axle units, brand SAF, with drum brakes approx. 300 x 200 mm * Automatic slack adjusters * ABS * Centrally-located wheel fixing for twin tyres * Total air suspension lift approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm, air suspension controlled up/down via air valve with locking function Lifting axle: * 1st axle liftable, operated from the chassis frame Steering: * 3rd axle forced-steered with manual and automatic reverse lock Brake system: * Dual-line compressed air braking system to EC standards with EBS and RSS * Spring actuators as parking brake acting on two axles * Polarity-protected coupling heads mounted firmly on the front crossmember, EC version, without connecting lines to the tractor unit Tyres: * 12 x 235/75 R17.5 – brand of our choice, mounted on 6.75x17.5 rims with offset Mudguards: * As per EC, 1/4 PVC mudguard Floor: * Wooden floor set flush into the outer frame. Above the wheels with steel checker plate cover Load securing high bed: * 4 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Load securing low bed: * 8 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t Kwjdsvl N N Hjpfx Adtst * 4 pairs of folding lashing rings sunken into the chassis frame longitudinal beams, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Stake pockets high bed: * 4 pairs of stake pockets in the outer frame, evenly distributed Stake pockets low bed: * 6 pairs of stake pockets in the outer frame, evenly distributed Removable stakes: * 20 removable stakes made from galvanized tube approx. 80/50 mm, total length approx. 1,000 mm Front wall: * Bolted, fixed steel corner posts filled with approx. 25 mm aluminum hollow sections Plug-in sideboards high bed: * One plug-in board each side in front, made of approx. 400 x 25 mm aluminum hollow section, length approx. 2,400 mm, removable, insertion pocket front in front wall corner post, rear in extra stakes approx. 80/50 mm * Additionally, one plug-in sideboard approx. 400 x 25 mm between the rear extra stakes as rear load securing Ramps: * 2 spring-assisted aluminum ramps, loadable up to approx. 32 t when supported * Ramps secured with

Condition: used, empty load weight: 13,220 kg, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2011, loading space length: 19,210 mm, loading space width: 2,550 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, air suspension, 5-axle, 1st and 2nd axle liftable, trailing steering, last axle trailing steering, raising + lowering, 4th and 5th axle steered, ABS (anti-lock braking system), extendable, stepwise extendable, widenable to 3m, lashing eyes, twin tires, rotating beacon 5x 13t Gigant axles! Semi-trailer telescopic from 8810mm to 15110mm from the gooseneck, 1st and 2nd axles liftable, 1st axle steered, 2nd and 3rd axles fixed, 4th and 5th axles trailing steered, load height 900mm! Widenable to 3000mm! only about 150000km driven ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Kjdpfx Aswa R Thedtswt

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0854-B190, Servo motor Brand: GE Fanuc Model: 6 Motor specification: A06B-0854-B190 Features: Power: 7.5 kW Frequency: 50/60 Hz Kwodpfx Adsr Nbkpotjt Current: 44 A Potential energy: 135-222V-AC Revolutions: 1500-8000 RPM

Condition: like new (used), functionality: fully functional, machine/vehicle number: L9-3000, input frequency: 200 Hz, GE FANUC L9-3000 A06B-0564-B177 Servo Motor GE FANUC L9-3000 A06B-0564-B177 Brand: Fanuc Kwjdpfx Adjricrwstst Model: L9/3000 Motor Model. A06B-0564-B177 Features: Power: 2.0 kW Frequency: 200 Hz Current: 12 AMP Potential energy: 114 V From machine: Amada cnc punching machine model Vipros 255

Condition: excellent (used), Year of construction: 2010, operating hours: 500 h, Natural gas turbine GE ( General Electric ) Model - Frame 9E YOM - 2010 Frequency - 50 Hz Power - 127 MW This power plant is in excellent condition because it was used only like SUPPORT unit. Kwsdpoxni Anofx Adtst So, it's coming with only approx. 500 working hours. NOTE - Also, it's important to mention, it's designed in way that with not so big investment you can increase the power up to 180 MW. Please contact us for more details. Thank you!

Condition: excellent (used), Buderus GE515 low temperature boiler 350kw. on request with Weishaupt oil or gas burner. Kwodpfx Aenr Ek Rodtet

Condition: excellent (used), Buderus low-temperature boiler GE515-400kw Kjdsv A I Hljpfx Adtjwt

Condition: excellent (used), Heating boiler Buderus GE315-140kw. Oil or gas Weishaupt Kwodpfx Asmnqcqjdtet

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Ksdpfx Adswauarjtowt

Condition: excellent (used), Year of construction: 2008, Boiler Buderus GE315 Output:170kw Burner: oil or gas Weishaupt burner available on request Viewing by telephone only! Preferential sale to dealers, tradesmen or export. Kwjdpfxomnqcmj Adtet All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Kodoq Am Ivspfx Adtewt

Condition: excellent (used), Buderus GE315 heating boiler 230kW (0295), available with oil or gas burner on request Kjdpfxexqry Is Adtewt

Condition: excellent (used), Year of construction: 2011, Buderus GE515 low-temperature 455 kW Kjdpfxew Ey Dae Adtewt

Condition: used, This listing is for a GE Axichrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column. The unit is in full working condition and is ready for immediate release. The GE AxiChrom Master 300-1000 Control Tower and GE AxiChrom 300/300 mm Chromatography Column offer an advanced, scalable solution for automated column packing in biopharmaceutical purification and process development. Designed for seamless integration and ease of operation, this system enhances workflow efficiency, optimizes chromatography resin performance, and supports GMP compliance for manufacturing applications. Kedexxycajpfx Adtowt Key Features: GE AxiChrom 300-1000 Master Control Tower: Automated Column Control: Preprogrammed methods for packing, unpacking, priming, and maintenance to improve uptime. Touch Screen Interface: Easy-to-use operator interface for precise control. Integration with UNICORN & Automation Systems: Supports Profibus integration with UNICORN or DeltaV Distributed Control System for batch record tracking and regulatory compliance. Multi-Column Management: A single AxiChrom Master unit can control up to ten chromatography columns. Intelligent Packing Wizard: Guides automated priming, packing, and unpacking of chromatography columns. GE AxiChrom 300/300 mm Chromatography Column: Automated Column Packing: Ensures verified packing methods for efficient resin performance. Scalable Design: Adaptable from process development to full-scale production. Optimized for Modern Chromatography Resins: Supports cutting-edge purification techniques. Easy Sanitization: Designed for GMP environments, ensuring safe and sterile operation. Closed-System Connectivity: Can integrate with slurry tanks and chromatography systems for improved process control. Specifications: Column Model: GE AxiChrom 300/300 mm Column Diameter: 300 mm Column Height: 300 mm Voltage: 415V Hertz: 50Hz/60Hz Control Tower Model: GE AxiChrom Master 300-1000 Width: 670 mm Depth: 630 mm Height: 1090 mm Foot Print: 630 x 670 mm Weight: 90 kg EMC: IEC/EN 61326-1, Emission according to CISPR 11, Group 1, class A, CFR 47 FCC Part 15B, class A Voltage: 380 - 480 V Frequency: 50/60 Hz Air Supply: 5.5 - 7 bar g. Clean dry air Benefits: Automated & Efficient: Reduces manual intervention, improving process consistency and productivity. Scalable & Flexible: Ideal for process development and full-scale biomanufacturing. Regulatory Compliance: Designed for GMP environments with complete regulatory documentation. Seamless Integration: Connects to UNICORN software, DeltaV, and other automation systems. Multi-Column Control: One AxiChrom Master can manage up to 10 chromatography columns. Applications: This system is ideal for biopharmaceutical purification, including: Monoclonal Antibody (mAb) Production Vaccine & Biologic Drug Manufacturing Recombinant Protein Purification Gene Therapy & Cell Therapy Processing With its combination of automated control, intelligent packing, and scalable chromatography, the GE AxiChrom Master 300-1000 Control Tower + GE AxiChrom 300/300 mm Chromatography Column is a powerful asset for biopharmaceutical manufacturing and large-scale purification applications.

Condition: used, This listing is for a GE Healthcare Ettan IPGphor 3 Isoelectric Focusing System. The unit is in full working condition and is ready for immediate release. The GE Healthcare Ettan IPGphor 3 is a cutting-edge isoelectric focusing system designed for speed, reliability, and enhanced performance in the first dimension of 2-D electrophoresis. Ideal for researchers looking to streamline their protein analysis workflows, this system offers robust features that cater to diverse applications. Key Features: Simultaneous Strip Processing: - Capable of running up to 12 IPG strips at once, accommodating various strip lengths of 7, 11, 13, 18, or 24 cm, providing flexibility for different experimental needs. Kwedpfx Ajxxx Uuedtet Enhanced Sample Handling: - Utilizes sample cups with the Ettan IPGphor manifold or manifold light, enabling increased protein loading and improved separation efficiency. Advanced Control Software: - The Ettan IPGphor 3 Control Software allows management of up to four individual units simultaneously, each with customizable run parameters for optimized performance. Safety Mechanisms: - Features an automatic voltage cutoff that activates when the safety lid is opened, ensuring operator safety during experiments. Compatibility: - Fully compatible with earlier Ettan IPGphor IEF units, making it an excellent upgrade for labs using older systems. It’s particularly suited for 2-D DIGE applications.