Used Plasmastar Ha 60 for sale (33,124)

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Lajdpfx Aksyah R Nsweh Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Year of construction: 2011, For sale: a vertical machining center Manufacturer: AGIE MIKRON / GF AgieCharmilles Type: HPM 600 HD Year of manufacture: 2011 Control system: HEIDENHAIN iTNC 530 Technical data / equipment: Travel distances X/Y/Z: 600 / 600 / 500 mm Lsdpfozk Erkjx Akwjah Spindle speed: up to 20,000 rpm Tool holder: HSK-A 63 Tool changer: 60 positions Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 6.5 kg Max. workpiece weight: 500 kg Feed rate X/Y/Z: 40 / 40 / 30 m/min Table adjustable in degrees Chip conveyor Coolant system Dimensions: approx. 3,500 x 2,350 x 3,050 mm Weight: approx. 9,500 kg According to the operator, the machine is in very good used condition. Inspection possible by appointment. ____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: good (used), Year of construction: 2019, Industrial robot Manufacturer: Kuka Type: KR60 HA Year of manufacture: 2018/2019 Few operating hours Reach: 2033 mm Weight: 665 kg Payload: 60 kg Kuka KRC4 controller Weight: 150 kg Software version: V8.3.40 Kuka touch panel Kuka connecting cables Lodpfx Akon Utbgjwoah 51026ä

Condition: excellent (used), Year of construction: 1997, GUTH ENGINEERING stirred tank, 600 L pressure-resistant magnetic stirrer (MDB 550H) with heating jacket Tank volume: 600 liters Jacket volume: 55 liters Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +5 bar Manufacturer: unknown Lasdpfxj Abapij Akwsh Year of manufacture: 1997 Space requirement: 140 x 105 x 215 cm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 260 mm, cutting range round steel at 45°: 260 mm, cutting speed: 100 mm/min, saw band length: 1,900 mm, Manufacturer: Jaespa Model: W260 HA Year of manufacture: 2018 Technical data: ----- - Bandsaw blade: 3,660 x 27 x 0.9 mm - Drive power: 1.5 kW - Cutting speed: 15 - 100 mm/min - Max. cutting capacity (round): 260 mm - Max. cutting capacity (square): 260 x 260 mm - Infinitely variable angle adjustment +/- 45° - Hydraulic material clamping - Hydraulic feed with automatic shut-off - Automatic bow lifting after cutting - Coolant pump - Frequency-controlled band drive - Weight: 420 kg - Dimensions LxWxH in mm: 1,900 x 750 x 1,220 Ledpfx Ajxvd Tqjkwsah Accessories: ----- - Roller conveyor 1,500 mm

Condition: good (used), Year of construction: 2005, machine/vehicle number: 7053055966, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, pressing force: 160 t, stroke length: 175 mm, table length: 4,050 mm, oil tank capacity: 150 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 11,620 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press brake would be available starting in October/November. Ledpfozc H Apsx Akwsah Please feel free to contact us if you require any further information.

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Lajdpjzfqdnsfx Akwsh Technical data: Center height: 350 mm Distance between centers: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: approx. 420 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 unused fixed steady rest with rollers, inner diameter approx. 380 mm • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm Lajdpfx Asz H Ttxjkwjh * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Travelling steady Laedpjy D Talefx Akwoh 3 jaw chuck manual All manuals present

Year of construction: 2004, condition: good (used), machine/vehicle number: 041115166, Offer 26312 Technical data: - Maximum swing over bed: 550 mm - Maximum swing over cross slide: 310 mm - Turning length: approx. 1500 mm - Travel distances: - Z-axis: 1600 mm - X-axis: 300 mm - Spindle mounting according to DIN Ledpezvna Uefx Akwjah - Spindle bore: 82 mm - Taper of tailstock spindle: MK 5 - Travel of tailstock spindle: 150 mm - Spindle speeds: 80 - 3500 rpm - Rapid traverse rates X / Y - Drive power: 17 kW - Including: - CNC control: FAGOR - Hydraulic chuck - Electric handwheels - 8-position tool turret - Manual tailstock - Coolant system - Footprint: approx. W 4400 x H 2100 x D 2300 mm - Weight: approx. 4400 kg

Condition: excellent (used), Year of construction: 1998, turning diameter over cross slide: 270 mm, turning length: 1,500 mm, turning diameter: 460 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, Model: Alpha 460 Plus Ledpfx Aey N Ulmekwjah Year: 1998 Control: Fanuc GE Swing Over Bed: 460mm (18 ½ ”) Distance between Centres: 1500mm (60”) Swing Over Top Slide: 270mm (10.8”) Spindle Speeds: 20 – 2000 RPM Machine With: 3 – Jaw Chuck 4 – jaw Chuck Fixed Steady Quick change Toolpost Coolant Pump and Fittings

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet Lsdezx Rz Tjpfx Akweah - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, ABB Robotics IRB 7600 robot – mechanical components only (various models and configurations – see below) 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, serial no. 76-63643 – mechanical components only (EAN 4262549323934) • Maximum robot load: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 Lasdpfxez Rndbo Akwoh 1 x ABB Robotics IRB 7600-500/2.55 M2004 robot, serial no. 76-63756 – mechanical components only (EAN 4262549323941) • Maximum robot load: 500 kg • Number of axes: 6 • Maximum reach: 2550 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, serial no. 76-63695 (20960 operating hours) – mechanical components only (EAN 4262549323958) • Maximum robot load: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, serial no. 76-63839 (16184 operating hours) – mechanical components only IRB 7600 (EAN 4262549323965) • Maximum robot load: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The stated amount is net and applies per item. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on-site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please provide country, city, and postal code. Freight costs upon request – please provide the delivery address.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, ABB Robotics IRB 7600 robot – mechanical components only (various models and versions – see below) 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, No. 76-63643 – mechanical components only (EAN 4262549323934) • Maximum robot payload: 325 kg Lajdsz Rnd Uepfx Akwsh • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-500/2.55 M2004 robot, No. 76-63756 – mechanical components only (EAN 4262549323941) • Maximum robot payload: 500 kg • Number of axes: 6 • Maximum reach: 2550 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, No. 76-63695 (20960 operating hours) – mechanical components only (EAN 4262549323958) • Maximum robot payload: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 1 x ABB Robotics IRB 7600-325/3.1 M2004 robot, No. 76-63839 (16184 operating hours) – mechanical components only IRB 7600 (EAN 4262549323965) • Maximum robot payload: 325 kg • Number of axes: 6 • Maximum reach: 3100 mm • Repeatability: 0.3 mm • Controller: IRC5 M2004 Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The stated amount is net and applies per item. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Pick-up at our location in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify the country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Durma CNC pressbrake Model CNC HAP 30160 Year : 2005 Capacity : 3050 mm. x 160 ton Laedpjzuvxpsfx Akwsh Control : Cybelec 3 axis (Y1 - Y2 - X) Last service and security control : July 2026 Equipment.... -Lots of bending tools -Crowning -Front arms sideway adjustable -Foot pedal

Year of construction: 1996, condition: ready for operation (used), A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible. Ljdjzpyytspfx Akwsah

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard Lasdpsyy Nlpjfx Akwjh o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm Lodpfx Ake Aawxljwoah

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Ledjzvl Tfspfx Akwoah Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: refurbished (used), Year of construction: 1975, DISKUS GRINDING MACHINE (Double-surface grinding machine) DISKUS WERKE AG (FRANKFURT / MAIN), Type DDS 600 P, Year of manufacture 1975, COMPLETELY OVERHAULED in 2024. Lasdjzzpaaspfx Akweh

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) Ljdjzrzt Hopfx Akweah - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Year of construction: 2000, condition: excellent (used), Used high pressure homogenizer NS5160HA made by GEA Niro Soavi with an operating pressure of 700 bar and a throughput of 7.000 l/h. Sanitary version with five ceramic pistons, an operating temperature of 40°C and a maximum viscosity of 12.000 cP. Powered by an electric motor with 160 kW which needs three-phase current at 380 V and 50 Hz. The homogenizer was regularily checked and maintained and is fully functional. Ledpfx Akohzcxrswsah

Year of construction: 2021, condition: excellent (used), Syspal 600HA2 Eurobin wash frame Laodpfx Ajnbdtijkwoh 2021, stainless, SWL 50Kgs, 3Ph

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Lajdpfxoxl Elgs Akweh

Condition: used, all stainless steel nett width 450 mm Laedpo Aawyisfx Akwjh length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm