Used Plunge Pool for sale (520)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, welding current (min.): 1 A, welding current (max.): 400 A, Migatronic Sigma Select 400 A Model S Mig/Mag CO2 Welding Machine Neat and well-functioning machine Version: Model S with MFW30 separate wire feeder and graphic control panel. In short, a super deluxe, reliable, and complete unit 15 to 400A current range 400V Almost full spool of wire included Without gas cylinder Location: Hamont-Achel, Belgium Itedpfew Uqutsx Aacen Transport available at additional cost Check out our other listings as well We are also seeking industrial machines year-round. Do you have surplus machinery? Email us with photos and information. The seller is not liable for typing or data transfer errors. The machine's appearance, technology and wear are consistent with its age; used machines are sold without warranty.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 32461/2384, Manufacturing origin Swiss Voltage 380 / 50 / 3 Netweight 4900 lbs Iedpfxod Amifo Aacotn Dimensions 121 x 69 inches TECHNICAL DATA Nominal distance between centre 600 mm Max. distance between centres, headstock and tailstock projecting 750 mm Height of centres, standard 125 mm Height of centres by means of raising blocks for work head-and tailstock 175 =ᐳ 250 mm Max. swing diameter with 125 mm height of centres 250 mm Max. swing diameter with raising blocks 350 =ᐳ 500 mm Table swivels each side 10° Max. lenght for surface grinding (width=200 mm) 900 mm Table speed infinitely viable by hydraulic drive, approx. .. 6 m/min Dwell of table reversal 0 - 5 sec. Grinding wheel for cylinrical grinding (diameter x width x hole) 350/400x50x127mm Grinding wheel for surface grinding diameter x width x hole 250 x 13 x 76 Speeds of grinding wheel spindle 1500/1700/2200/3600 Grinding wheel head swivels 270° with indexed stop each 90° Vertical movement of grinding wheel head, height of centres -350 mm Cross movement of grinding wheel head 285 mm Rapid advance and withdrawal of wheelhead 40 mm Intermittent infeed per reversal of table 0,001-0,03 mm/dia Infeed for plunge grinding 0-0,9 mm/dia Micro-corrector of infeed, 1 division of dial 0,001 mm/dia Swivel of work headstock 360° work speeds infinetely viable, normal/special 20-400/10-400 Internal taper of headstock/tailstock 5/3 Morse Grinding wheel motor, approx. 4 HP errors and omissions excepted data given without obligation Inventory Nr.2170089, machine equipped with : 1 Workpiece headstock MT5 1 sinus rule without comparator 1 Wheel headstock with 4 pulleys 1 Tailstock MT3 1 Collet clamping device with drawbar and reduction sleeve B32 1 Internal grinding device with quill Fischer UJ50x250 – pulley Ø 48 for 14000 min-1 1 Pivoting wheel trueing-up device with sole 50 mm 1 Table’s pivoting stop without comparator 1 Cooling device through decantation 1 extractor 1 balancing stake

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (min.): 90 g/m², paper weight (max.): 300 g/m², control type: PLC-controlled, No minimum price – guaranteed sale to the highest bidder! Itjdpfxjxb Dvcs Aacjn Submission of a bid obligates the buyer to collect the item by 17.10.2025! As the machine is floor-level, removal is straightforward. TECHNICAL DETAILS Output: 1,500 to 9,000 cycles/h Formats Feeder untrimmed: 92 x 128 mm to 311 x 355 mm Final fold: 5 to 25 mm Pre-fold: 8 to 16 mm Cover feeder unfolded: 160 x 128 mm to 622 x 355 mm Cover feeder folded: 89 x 128 mm to 311 x 355 mm Paper weight: 90 to 300 g/m² Trimmer 3-side trim: max. 50 mm 3-knife trim untrimmed: 89 x 120 mm to 305 x 349 mm, max. thickness 10 mm Production range: up to oversize A4 format EQUIPMENT Patented register stop belt for gentle material handling PLC control system 3x Double vertical feeders (DVA) 2 feeder stations on one shaft Modular design for processing with suction or gripper opening Miss-sheet detection on delivery blade Cover feeder UFA HS400 control cabinet Vacuum pump for DVA/UFA DVE Vacuum pump VE Wire spool device DAS20 Transfer mark table Shingled delivery SA Manual single-sheet feeder Staple monitoring from below 2x loop stitching heads: 52-L6 Stapling machine HM100 Universal end stop Miss-sheet collection tray

Year of construction: 1997, condition: excellent (used), functionality: fully functional, - Manufacturer: Mercedes-Benz - Type: 1424 - First registration: 07/1997 - Kilometers: 153185km - Unladen weight: 12.200kg - Payload: 3.800kg - Gross vehicle weight: 16,000kg - Power: 180kw / 244PS - Gearbox 7 speed manual - Wheel formula 4x2 - 2 auxiliary drives - Power take-off 1: NMV 4/12 - Power take-off 2: NA 4/120-10c - Travel drive in work mode - Make ZF Type HZA Duodrive - Vmax: 15/min, best cleaning speed 11/min - Body/tank - Decontamination chamber: 500 liters - Water pockets: 3200 liters (reduced from 5000 to 3200 due to weight problem) - Dirty water tank: 6000 liters (A1 tank) - Cyclone separator x2 - Cleaning concentrate - Hot water treatment - 2 vacuum pumps (capacity 1650cmb/h at 460 mbar) - 2 high pressure pumps (capacity 15 l/min-280bar) - Manual suction through suction device at the rear Itjdpfou Tuzlox Aacen - High-pressure lance with adjustable dosage - High-pressure front bumper pre-treatment - Next HU: 11/2025 - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,334 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year 2009, Fully Workshop Overhauled Technical Data: Manufacturer: Europress Type: 6500 V5 H4 Year of manufacture: 2009 Operating hours: approx. 15,334 hrs Number of bales: 138,097 Main press force: 120 t Specific press force: 142 kg/cm² Feed opening dimensions: 1,650 x 1,100 mm Fill volume: 3 m³ Filling volume per press cycle: 1.58 m³ Bale dimensions: 730 x 1,100 mm Drive power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load: 83 kW Current consumption: 150 A Binding: 5-fold vertical, 4-fold horizontal, fully automatic Bale weights: 450-900 kg Hydraulic oil tank volume: 1,200 L PLC control: Siemens S7-200 Operator panel: Siemens touchscreen Press dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport dimensions (press only): 9,965 x 2,500 x 2,900 mm (L x W x H) Machine weight (press): approx. 28 t Overhaul Work Performed on the EP 6500 V5: - Completely de-rusted and repainted - Full renewal of the interior steel floor of the press - Overhaul of plunger (steel construction) - Complete overhaul of horizontal and vertical lance boxes - Full replacement of internal Hardox lining - All hydraulic hoses replaced - Both lifting cylinders renewed - Knives and counter-knives replaced - All hydraulic cylinders resealed and tested - All guide and sliding plastics renewed - Wire deflection pulleys replaced Iedpfew Rlf Eox Aacotn - Various cables and sensors replaced - Various electrical components (control cabinet) renewed - Complete check of electrical system/control - Full pressure test of hydraulic system Remarks: The machine has been overhauled, checked, and tested by us. You can find a video on our website or YouTube channel. Inspections, including powered operation, are possible at any time by appointment. On request, we are also happy to perform test runs with your material for a fee. For questions about the machine, you may also contact us by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data refer to the manufacturer’s specifications. No liability is accepted for the accuracy of the information provided or for any possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspection possible by appointment. Sale is ex location, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2016, Machine available at short notice Touchscreen Coiled material 0.3 - 3 mm Bar material 0.3 - 15 mm Panel thickness 6 - 60 mm Workpiece length min. 140 mm Workpiece width min. 60 mm Feed speed 10 - 20 m/min, stepless Motorized height adjustment Processing systems: Itedpfxsxa Enqj Aacon Holzher hot-melt adhesive system GLU Jet GJ 302 with interchangeable cart Cartridge chamber Granulate hopper Suitable for EVA and PUR adhesives Motorized glue nozzle height adjustment with sensing nozzle Holzher L-Tronic system with interchangeable cart Release agent spraying at infeed Motor-adjustable infeed fence 1804 jointing unit 2 x 2 kW up to panel thickness 60 mm MG 701 automatic edge feeder for coiled and bar material GF 302 multi glue application LT 702 L-Tronic 1914 motorized pneumatic pressing unit KA 701 motorized/pneumatic cross-cut saw 0-10° 1828 flush milling unit FF 701 multi-profile contour milling unit ZK 501 radius scraper blade FK 701 surface scraper blade unit 1856 cleaning agent spraying 1944 pneumatic buffing unit with plunge control Automatic central lubrication Scissor outfeed, front workpiece support

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: fully functional, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package. Iodoxc E Trjpfx Aacotn Price for the complete package 150000 € , pick up only, at D-36404 Vacha/Germany, or delivery in germany subject to additional fees.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 7063234, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 550 kg Customs tariff number: 8460.2930 Dimensions: 150/60/120 cm TECHNICAL SPECIFICATIONS Minimum diameter: 0.1 mm Maximum diameter: 12 mm Itjdpfx Aew T Tqneacjn Maximum plunge grinding length: 50 mm Work wheel diameter: 150 mm Work wheel length: 50 mm Regulating wheel diameter: 100 mm Grinding motor: 1.5 kW Work wheel speed: 4,500 rpm Regulating motor: 0.35 kW Regulating wheel speed (variable): 20–150 rpm For diamond dressing: 455 rpm Technical specifications are provided without obligation and subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, stack height: 30 mm, paper weight (max.): 1,000 g/m², product length (min.): 500 mm, product width (max.): 350 mm, Equipment: CE marking, No reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the equipment by 17/10/2025. As these are floor-level machines, extraction is straightforward. The offer includes one tb sprint B 312 VP and one tb sprint 304 QSM! Both machines were fully overhauled in 2023. --- tb sprint B 312 VP TECHNICAL DETAILS - Stations: 12 - Variable stack height: up to 30 cm - Formats: max. 35 x 50 cm, min. 6.5 x 10 cm - Paper weights: 18 to 1,000 g/m² - Throughput: up to 3,200 cycles/h MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - EQUIPMENT - CE marking - Jogger bridge as a removable transfer to connecting machine - Manual feed station left - Lateral air blast - Individually adjustable single suction and blow nozzles - Controlled air separation and blast - Photocell sheet miss-feed detection per station - Electromechanical double-sheet detection at the delivery (motorized adjustment) - Overlapping shingle conveyor for transverse transport - Paper jam detection for transport table - Table illumination - Manual feed station right - Delivery jogger for standard or offset stack, selectable via switch - Total and pre-set counters - Digital speed display in cycles/h, infinitely adjustable --- tb sprint 304 QSM TECHNICAL DETAILS - Formats: max. 35 x 50 cm, min. 6.5 x 15.5 cm - Smallest booklet: 6.5 cm spine length x 6.5 cm - Throughput: up to 3,100 cycles/h (format and paper dependent) Stapling - Stitching heads: 2 slim heads for standard stapling up to 5 mm (Hohner Universal) - Fold-down boxes: complete with fold-down boxes and wire spools - Automatic stapling thickness adjustment - Block stapling: up to maximum format - Cross adjustment: of the staples relative to the fold Folding - Fold system: frictionless knife fold with automatic thickness adjustment and re-pressing for approx. 120 sheets of standard 80 g/m² paper - Channel punch-out: single for block stapling Trimming - Front trim: upper and lower knives incl. air blast for trims to 6.5 cm and offcuts greater than 1.5 cm - Format adjustment: stepless for front trim - Head and foot trim: 3–20 mm each for approx. 80 sheets of standard 80 g/m² paper - Knives: upper and lower - Waste paper box: included - Continuous operation: same formats as 303 QSM Delivery - Shingle conveyor: shortened version with double-sided motorised feed and continuously adjustable shingle spacing - Delivery angle: format-adjustable for booklets and block stapling MACHINE DETAILS - Electrical - Voltage: 3/N/PE 400V - Frequency: 50 Hz - Machine Configuration - Version: Quick Set motorised (QSM) - Feed rollers: with upper belt transport system - Vacuum belt: included Ijdoxb Dbxepfx Aacotn - Motorised format changeover: included - Fine adjustment: two handwheels (independent for head and foot) - Size readout: two digital counters, 0.1 mm increments - Motorised alignment: to collating machine

Condition: excellent (used), power: 120 kW (163.15 HP), overall weight: 25,000 kg, Year of construction: 2017, Equipment: air conditioning, cabin, hammer hydraulics, hydraulics, LIEBHERR R924 LC ZSA/Auxiliary Hydraulics/Air Conditioning/2017 • Manufacturer: LIEBHERR • Type: R924 LC • Year of Manufacture: 2017 • Operating Hours: 13,376h • Weight: 25,000kg • Power: 120kW/163hp • Hydraulic slewing ring bushing NEW from Liebherr • Newly sealed by Liebherr • Hydraulic pump NEW from Liebherr • Hydraulic pump finely adjusted NEW from Liebherr • Particle filter NEW from Liebherr • Valves NEWly adjusted • Oilquick quick coupler • Mono boom • Central lubrication system • Auxiliary hydraulics hammer grapple • Auxiliary headlights • Cab protection • Panoramic view cameras • 85% track condition • Air conditioning • Heated seats • German machine • Ready for immediate use _____ You can also have the description in another language by Email • Our Services • • - Export declaration, customs registration, yellow temporary license plates, red customs license plates. • - Purchase of your used construction machinery or commercial vehicle • - We help with financing • - We offer transport solutions • - Inspection and demonstration of the machines from Monday to Friday, 9:00 a.m. to 5:00 p.m. (Saturdays by appointment only) • • Our machine pool is constantly changing and is always up-to-date on our website. • This offer is non-binding and subject to change. Isdpfxov U A R Ne Aacstn - Subject to prior sale. - Errors and/or typos not excluded. - Sales subject to our terms and conditions.

Condition: excellent (used), Year of construction: 1983, Model: Fortuna F23 S1000 ASW 45 Manufacturer: Fortuna-Werke Maschinenfabrik GmbH Origin: Stuttgart-Bad Cannstatt, Germany Year of Manufacture: 1983 Machine Type: Universal external cylindrical grinding machine Control Type: Not CNC – semi-automatic with digital position indicators Workholding: Grinding between centers with headstock and tailstock Max. Grinding Length: 1000 mm Main Motor Power: 26 kW Voltage: 380 V Frequency: 50 Hz Connected Load: 50 A Machine Weight: Approx. 4900 kg Grinding Wheel & Spindle: Wheel Diameter Options: 400 mm, 450 mm, 500 mm, 600 mm, 750 mm, 900 mm Wheel Bore Diameter: 127 mm / 203 mm / 305 mm Iedpsw Avhpefx Aacjtn Spindle Speeds (depending on wheel size): From 930 rpm to 1870 rpm Surface Speed Compatibility: 35 m/s and 45 m/s Spindle Design: Combined axial-radial bearing system for high rigidity Oscillating Grinding Support: Yes – for improved surface finish and cooling Grinding Functions: External cylindrical grinding only (not centerless) Longitudinal feed (table movement) Plunge feed (cross movement) Oscillation grinding (with adjustable stroke) Digital input system (non-CNC but programmable logic based) Manual fine adjustment via micrometer and scale plate Notes: Machine is designed for roughing and finishing of steel, cast iron, and aluminum Built-in charts and formulas provided in the manual for infeed rates, stock removal, overspark passes, and optimal feed per material Extremely rigid German construction, ideal for toolrooms or production environments seeking repeatable precision without CNC control Equipped with electronic displays and control panel (not G-code programmable) Power panel and internal logic controlled through Fortuna's relay/PLC interface

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality in-house by a TRUMPF technician. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam switched on: 17,731 hours Laser Metal Fusion Machine (Metal 3D Printing) Flexible solution for industrial additive manufacturing The TruPrint 3000 is a universal medium-format machine (LMF / PBF / LPBF) with industrial part and powder management. You can now benefit from even greater flexibility, quality, and productivity for your additive series production: Productivity is almost doubled, regardless of the part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-lasers during the ongoing build job enables optimal quality for printed multi-laser components. The latest developments in inert gas flow further increase component quality and part reproducibility. This is documented parallel to the build job using melt pool monitoring. This allows compliance with documentation requirements, such as those in the medical field. The TruPrint 3000 is highly flexible and adapts to the individual requirements of our customers. With a build volume of 300 mm in diameter and 400 mm in height, it is used in a wide variety of industries. Depending on the component size and complexity, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking – all under inert gas. With the latter, you also minimize 3D printer downtime by working parallel to production. Technical Specifications: TruPrint 3000 Build Volume (Cylinder): Diameter 300 mm x Height 400 mm Processable Materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Current material and parameter availability upon request. Preheating (standard) Up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser) 500 W Beam diameter 100 - 500 μm Layer thickness (individually adjustable) 20 - 150 μm Exposure speed (powder bed) 3 m/s Build-up rate 5 - 60 cm³/h Connection and consumption Electrical connection (voltage) 400/460 V Electrical connection (current) 32 A Electrical connection (frequency) 50/60 Hz Shielding gas: Nitrogen, Argon Design Dimensions (including filter) (W x H x D) 3385 mm x 1435 mm x 2225 mm Weight (including powder) 4300 kg The system was dismantled by the manufacturer; disassembly and functional reports are available. All axles are professionally secured. The system was constructed with 1.44.04 steel and, most recently, AlSi10Mg. Available from March 2025 Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone. Itodpfxevvl I Te Aacjn

Condition: used, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Itjdpfouwv Hyex Aacen Please remark that the pictures show an already delivered machine with other options. Wheelhead variant UR/RS: • Grinding wheel arrangement for external and angular plunge grinding in a row • Thus, in each case 400mm grinding wheel diameter • Thus, substantially lower risk of collision • Easier programming • Grinding wheel equipment in each case 400x63x127mm • HF-Spindle for internal grinding • B-axis CNC-controlled for external-, surface and internal grinding at one setting. • Swivel range +10°/-270° • C-axis for polygon grinding • Tight lower part • Grinding head motor 10,0 kW • Tailstock • Marposs measuring system for grinding wheel alignment • Marposs lateral positioning system

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Iodpfx Asiqt S Ajacotn Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. errors and omissions excepted-data given without obligation

Condition: used, 2-vessel brewhouse, consisting of: - KASPAR SCHULZ mash and wort kettle for up to 80 hl per brew. Built approx. 1980, directly fired by means of a 2-stage gas burner (renewed in 2000). Stainless steel vat. Agitator with steel chains. - KASPAR SCHULZ lauter tun for up to 80 hl per brew. Year of construction approx. 1980. 12 spring areas. Equipped with top-driven chopper (steel chopper suspension), stainless steel chopper knives and brass false bottom. Spreading takes place via an eccentric screw. - KASPAR SCHULZ whirlpool made of stainless steel. Year of construction approx. 1980. - 80 hl stainless steel tank, built approx. 1980, insulated and clad, as hot water reserve for mashing and sparging water. - Tubular heat exchanger, built approx. 2000, insulated, for heating cold water for mashing and sparging - Bischoff brewhouse control system, fully automatic, connection-programmed. Additional title: directly heated Capacity mash- and wort kettle: 8000 l Capacity lauter tun: 8000 l Iedpfx Aoxbn Szjacotn Operation / Control: fully automatic Features: directly heated (2-stage Weißhaupt gas burner) 80 hl Kaspar Schulz mash and wort kettle, 80 hl Kaspar Schulz lauter tun, whirlpool, tube bundle heat exchanger, hot water reserve, fully automatic brewhouse control with control cabinet, various pumps, fittings and pipework

Condition: good (used), Year of construction: 1998, Working area 500 x 350 x 250 (L x W x H), available with extensive accessories if required! Eroding wire 0,25mm - 10 pieces new spools available Itedpfsha U I Djx Aacjn Filters and resin cartridges available Please ask if you are interested !

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Iodovtdztepfx Aacetn

Condition: like new (used), functionality: fully functional, machine/vehicle number: D31369, Year of construction: 2019, operating hours: 73 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 355 mm, table length: 254 mm, construction height: 355 mm, --- RARE OPPORTUNITY --- Stratasys F370 for sale due to business closure. Barely used, with only 70 operating hours—essentially in like-new condition. This printer is ideal as an addition to existing machine parks or as a high-quality all-rounder for newcomers to 3D printing. Isdpexgh U Tjfx Aacetn The printer is currently packaged and in storage. It was inspected and serviced by the manufacturer’s authorized distributor prior to proper decommissioning. The most recent exported cfg file can be provided upon request. The F370 was designed with user-friendliness in mind, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide selection of materials for various 3D printing applications, typically including prototyping, the production of tools and fixtures, as well as low-volume manufacturing of end-use parts. Its compact footprint and quiet, safe operation—without requiring special arrangements—make the F370 ideal for workshops, offices, or even classroom environments. With soluble support material, even complex geometries with internal cavities can be created—uncommon in this class of printers. The four easily accessible material spool bays on the front (2x model & 2x support) allow for quick material changes. The complete package is rounded off by the GrabCAD Print and Insight design-to-print software applications, automatic calibration, an integrated camera for remote print job monitoring from your computer, and an intuitive front-panel interface.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing Isdeuxfu Nepfx Aacjtn - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Iodpfx Aajw T Sd Tecjtn RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, Brewing plant with stainless steel 5-device brewhouse (manufacturer: Nordhausen) with an output of 10 hl, with 2-roll grist mill, wort cooling, wort aeration and hot water tank. Fermentation, storage and pressurised tank cellar with: - 7 pieces 25 hl ZKGs (Nordhausen, 2009) coolable, insulated with firmly welded stainless steel panelling - 6 upright storage tanks, 10 hl - 1 upright storage tank, 50 hl, manufacturer Metrec) - 1 upright storage tank, 40 hl, manufacturer Metrec - 1 horizontal pressurised tank (Kaspar Schulz, 1994), 37 hl, 3 bar - 1 yeast tank (Nordhausen, 2012), 3.5 hl, 2 bar, insulated, conical, with content measurement. Filtration with mobile kieselguhr filter and Pall particle filter. With mobile CIP system (Nordhausen, 2009) with 2 tanks of 1.6 hl each in square tube frame with pump and operating buttons and switches. Supply technology: - Steam generator (Jumag, 2009), heated with liquid gas - Compressed air system (Kaeser, 2008) - 2 x ice storage refrigeration system (Hafner-Muschler, 2009 and 2011) Isdpfx Aasxbnw Dscotn Additional title: 10 hl brewhouse with tank cellar and supply technology Cast wort capacity: 1000 l Features: 2-roll grist mill, 5-vessel brewhouse (Apparatebau Nordhausen) with mash tun, lauter tun, wort kettle, whirlpool, hot water tank, wort aeration, wort cooling system, 7 x 25 hl CCTs, 6 x 10 hl storage tanks, 1 x 40 hl storage tank, 1 x 50 hl storage tank, 1 x 37 hl horizontal pressure tank, 1 x 3.5 hl yeast tank, mobile kieselguhr filter, mobile CIP system, steam generator, compressed air system, 1 x ice storage refrigeration system

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested ! Isdpfxsi El Iao Aacstn

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding Isdsuxfucepfx Aacjtn - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm Itjdpfxsw T Sc Nj Aacon WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), Year of construction: 1997, Travel 1000 x 750 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 30-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder, glass scales, Iedpfx Aashty E Ijcjtn 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested !