Used Centerless Grinding for sale (3,910)

Condition: used, Year of construction: 1981, grinding diameter max. 100 mm grinding length 180 mm grinding wheel diameter 400 mm grinding wheel width 180 mm In our opinion, the machine is in good used condition and can be viewed under power by appointment. There are 4 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery Dqpif2 if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2014, machine/vehicle number: 5368, grinding diameter max.:3-220 mm regulating wheel width:500 mm max. width of grinding wheel:500 mm weight of the machine ca.:16 t. dimensions of the machine ca.:12 x 10 x 8 m. Dplk8R grinding wheel diam. min/max.:420-610 grinding wheel diameter - width-internal grin:304,8 x 500 mm Regulatin wheel diameter min/max.:300-350 mm The machine is currently designed for plunge grinding JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls.

Condition: good (used), Year of construction: 2011, operating hours: 11,542 h, Functionality: fully functional, machine/vehicle number: 5306, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, total width: 25,000 mm, total length: 23,000 mm, grinding diameter: 100 mm, grinding length: 250 mm, overall weight: 5,600 kg, workpiece diameter (max.): 100 mm, power: 35 kW (47.59 HP), 4-lane feeding, fully automated Stereization Siemens CNC C3Pzrr0J CNC dresser few operating hours

Condition: good (used), maximum grinding diameter: 200 mm working grinding wheel - 508 x 305 x 254/280 mm rotational speed of the grinding wheel - 1240 rpm guide grinding wheel - 270 x 150 x 254/280 mm rotational speed of the grinding wheel: 15-250 rpm rotation angle of the guide grinding wheel spindle in the vertical plane: 0 ÷ 8° in the horizontal plane: ± 4° Dqlqej

Condition: ready for operation (used), Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 74.976, grinding wheel width: 50 mm, grinding wheel diameter: 400 mm, grinding diameter: 35 mm, rotational speed (max.): 1,450 rpm, rotational speed (min.): 2,850 rpm, grinding wheel speed: 35 rpm, overall weight: 3,100 kg, outer dimension length: 2,000 mm, outer dimension width: 1,600 mm, nominal power: 2.1 kW (2.86 HP), power: 11 kW (14.96 HP), type of cooling: water, Equipment: rotational speed infinitely variable, We are selling this machine for space reasons and due to an upcoming move to a new factory building. The machine is technically ready for use and with workpiece feed, coolant device and belt filter system. Ckf8Wh0Xug The original operating instructions are available. The machine can be inspected at any time and is under power.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, Nkwnpc9 and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: excellent (used), Year of construction: 2015, operating hours: 23,369 h, Mikrosa centerless external cylindrical grinding machine Bei2Vzm With automation Siemen control Dimensions of the measuring machine: Length: 1,55m Width: 1.50m Height: 2.90m

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery Hu07Hxw We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: repair required (used), Year of construction: 1975, Functionality: limited functionality, machine/vehicle number: 16.42-37-23, grinding wheel width: 200 mm, workpiece weight (max.): 5,000 kg, grinding wheel diameter: 250 mm, Machine is old but still able to run production, if you need more insight information do not hesitate to contact us Uq3Surobgz

Condition: good (used), maximum grinding diameter: 200 mm working grinding wheel - 508 x 305 x 254/280 mm rotational speed of the grinding wheel - 1240 rpm guide grinding wheel - 270 x 150 x 254/280 mm rotational speed of the grinding wheel: 15-250 rpm Cklctoqrlg rotation angle of the guide grinding wheel spindle in the vertical plane: 0 ÷ 8° in the horizontal plane: ± 4°

Condition: used, grinding diameter - min. 0,5 mm grinding diameter max. 125 mm max. dia. of grinding wheel 406 mm max. width of grinding wheel 254 mm regulating wheel width 254 mm turning speed range - drive spindle max. 1900 U/min regulating wheel turning speeds 0 - 150 U/min total power requirement 18 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,3 x 2,2 x 1,8 m Grinding disc ø406 x 254 x ø229mm Regulating disc ø280 x 254 x ø165mm in accessories New grinding disc New regulating disc with vibratory feeder Bsnd0Q2Nwhw

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 5041, Please let us know your asking price. Bsfl2Vcfpbg Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: good (used), grinding diameter max. 300 - 350 mm regulating wheel width 20 - 110 mm max. width of grinding wheel 110 mm turning speeds 1400 U/min total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,6 x 1,2 x 1,8 m Gxc0B7U

Condition: good (used), ESTARTA 312 Centerless cylindrical grinding machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Workpiece, diameter: 1-5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0-1 mm Work feed: Stepless Speed, grinding wheel: 1300 rpm Weight: approx. 4000 kg Dimensions: 1.5 x 0.4 x 2.0 m SCOPE OF OFFER Including: (non-exhaustive list): Grinding wheel (mounted), regulating wheels (mounted), grinding pads, complete operating documentation. Bmffairqmu3 Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) 9A8Afmf

Condition: used, Year of construction: 2002, Centerless Grinding Machine BOCCA MALANDRONE R 80/200 CNC GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x300 mm Regulating Wheel Dimensions: Ø355xØ152,4x300 mm Qgw3D

Condition: good (used), Year of construction: 2004, Machine Reference nr.:158 Blh2Tdsnhdq CENTERLESS GRINDING MACHINE BOCCA & MALANDRONE 120-500 Manufacturer BOCCA & MALANDRONE – Italy Model 120-500 Year 2004 Working range Ø 15 – 100 mm. Grinding wheel Ø 610 x 508 mm. Counter wheel Ø 355 x 508 mm. Grinding wheel surface speed 45 mt./sec. Grinding wheel motor 90 Kw Counter wheel motor Siemens brushless motor Tension 400 V. – 50 Hz. COMPOSITION OF THE LINE Grinding machine Electric equipment with PLC SIEMENS S-7 series 300 Lubricating system Dust extraction system Hanging control panel Main motors Manual available CE Mark

Condition: good (used), Year of construction: 2005, Functionality: fully functional, Centerless cylindrical grinding machine Ccaspkg Diameter range 1-30 mm Grinding spindle speed max 2000 rpm Grinding wheel dimensions: D=305mm, W=150mm; bore 120 mm Dimension: 1900x1550x1420 mm Weight: 1700 KG

Condition: good (used), grinding diameter max. 1 - 100 mm regulating wheel width 180 mm max. width of grinding wheel 180 mm workpiece length - max. 300 mm turning speeds 9 - 425 U/min total power requirement 15 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 2,3 x 1,9 m Ukuss9Pcdj

Condition: reconditioned (used), Functionality: fully functional, Equipment: rotational speed infinitely variable, Herminghausen SR1 Centerless cylindrical grinding machine Gpaifs Conventional and very precise throughfeed grinding machine. Good machine stability due to robust cast iron bed and hydrodynamic segment jaw bearing. Quick and easy changeover. Very good accessibility to all important functions. Partially overhauled machine with new frequency converters and new control panel. Mechanically and electrically in very good condition and ready for immediate use. Many accessories.

Condition: refurbished (used), Year of construction: 1978, Functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m The machine is completely overhauled, new electrics, new control cabinet with Siemens S7 control system. New cladding with sliding doors, Dressing quill SS electrically controlled via servo motor. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.) Bsi29Vat2

Condition: used, Year of construction: 1997, Centerless grinding machine BOCCA MALANDRONE R 120/500 CNC GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x508 mm Jchyumgqs Regulating Wheel Dimensions: Ø355xØ152,4x508 mm

Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS grinding diameter: 2,5 - 75 mm Bar grinding diameter: 2.5 - 50 mm grinding wheel diameter: 508 mm grinding wheel width: max. 254 mm Drill diameter: 203 / 229 mm Peripheral speed: 33 / 45 / 60 m/s regulating wheel diameter: 280 mm Dqhyazwpg regulating wheel width: 254 mm drilling diameter: 165 mm speed worm gear: 10 - 200 rpm Speed bevel gear screw drive: 25 - 600 rpm MACHINE DETAILS motor power: 35 kW footprint: 1500 x 4450 mm net weight: 7200 kg total weight: 8,6 t Transport volume: 17 cbm EQUIPMENT - 1 balancing device - 1 CNC drive motor on the regulating wheel - Automatic dresser - 2 hydraulic dressers - 1 through-grinding device

Condition: used, Year of construction: 2001, machine/vehicle number: 5012, grinding diameter max.:3-220 mm regulating wheel width:400 mm max. width of grinding wheel:400 mm grinding motor:55 kW peripheral speed:max. 45 m/sec regulating wheel dimensions:350 x 400 x 203 mm dimensions of grinding wheel:CBN 500 x 400 x 304 mm grinding wheel size:KORUND 600 x 400 x 304 mm total power requirement:75 kVA weight of the machine ca.:13 t. dimensions of the machine ca.:4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. Gohdv0 The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls.

Condition: new, Year of construction: 2024, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm Machine is suitable to the pass and feed grinding, hardened and ground Guide pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Very economic price / performance ratio 9K9J0Kxz9