Used Platen for sale (566)

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm Nwjdshy Nnbopfx Aaaof TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) Nwodpeyhby Hofx Aaajf • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm Nsdjyhbq Eopfx Aaajwf • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: refurbished (used), For sale is a servo-hydraulic mold carrier, completely overhauled by Optitek. Technical data: Current state-of-the-art: after full overhaul in 2026 Closing force: 600 kN Stripping force: 300 kN Hydraulic operating pressure: max. 250 bar Clamping area: 2,000 x 1,000 mm Parallel stroke: 750 mm Opening width: 1,350 mm Upper platen tilt: 45° Lower platen tilt: 30° Total permissible tool weight: max. 100 kN Max. upper tool weight: 50 kN Travel speed: 160 mm/s Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm Machine weight: 8 tons Electrical connected load: 45 kW Operator side: one-sided Tank volume: 800 liters The following services have already been performed as part of the mechanical overhaul: · Disassembly of the mold carrier · Sandblasting of the mold carrier · Inspection of weld seams and restoration to proper condition if necessary Nodpfx Ajy Ax Ifjaaowf · Cleaning, priming, and painting of individual mold carrier components: - Frame: RAL7035 (light grey) - Press ram: RAL3000 (flame red) · Replacement of all bearings and bushings · Refurbishment and resealing of drive cylinders · Assembly of the mold carrier

Condition: ready for operation (used), Year of construction: 2001, operating hours: 4,517 h, clamping force: 16,000 kN, screw diameter: 125 mm, injection weight: 7,450 g, This 3-axis Krauss Maffei 1600-17200MC hydraulic injection moulding machine was manufactured in 2001. It features a clamping force of 16,000 kN and a screw diameter of 125 mm. The machine has a maximum shot weight of 7450 g and a platen size of 2600 x 2110 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1600-17200MC machine we have for sale. Contact us for further details. • Injection unit: 17200 • Distance between tie bars (h × v): 1600 × 1250 mm • Platen size (h × v): 2600 × 2110 mm • Clear distance (x × y): 1800 × 1400 mm • Max. mold opening stroke: 2,500 mm • Mold installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mold opening force: 1,108 kN • Moving platen force: Opening 177 kN / Closing 153 kN • Ejector stroke: 300 mm • Ejector force (forward/backward): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder/screw set (1x) Nwodpfoyyyr Tsx Aaaef • Internal cooling system • Core pullers (2x)

Condition: ready for operation (used), Year of construction: 2003, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials including PA, PP, PE, and ABS. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Contact us for further details. • Stroke volume: 1097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Travel force (moving plate): opening 105 kN / closing 95 kN • Max. opening stroke: 920 mm Nwedpoyyxmvofx Aaajf • Min. mold height: 380 mm • Max. daylight: 1300 mm • Size of mold platens (H x V): 1060 x 1095 mm • Distance between tie bars (H x V): 710 x 710 mm • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mold weight: 4950 kg Additional equipment • Handling system: Wittmann with the following robot travel (X/Y/Z): 420 / 1200 / 2000 mm

Condition: excellent (used), Year of construction: 2004, clamping force: 1,000 kN, Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Nwjdpfx Aajvt Rwusaof Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE without hopper

Condition: ready for operation (used), Year of construction: 2005, clamping force: 5,000 kN, screw diameter: 70 mm, injection weight: 1,230 g, This 3-axis DEMAG Erdotech 500-3300 hydraulic injection moulding machine was manufactured in 2005. It features a screw diameter of 70 mm and a shot weight of 1,230 g. The machine has a maximum daylight of 1,450 mm and includes a handling system with a Wittmann linear robot. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Erdotech 500-3300 machine we have for sale. Contact us for further details. • Distance between tie bars: 900 mm • Min. mould installation height: 400 mm • Max. daylight (distance between platens): 1,450 mm • Centering ring: 160 mm • Core pull: 2-circuit core pull control (plus 1 extra core pull mentioned) • Control system: Demag NC4 Nsdpfx Aaeyycu Dsaewf Additional equipment • Handling unit: Wittmann linear robot, 3 axes (X/Y/Z linear) • Granule feeder: Wittmann, Typ VITMAX A312-Y (24 V, 1 A) • Hot runner controller: Gammaflux, Typ GM1G030F012S4EJ

Condition: ready for operation (used), Year of construction: 2002, operating hours: 57,752 h, clamping force: 13,000 kN, screw diameter: 105 mm, overall weight: 83,000 kg, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details. • International size designation: 12000 MC / 1300 • Operating hours: 57,752 hElectrical • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Motor total current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and power separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil cooled pump motor: IP54 • Cabinet cooling fanControl and HMI • MC4 32-bit microprocessor control • TFT color display • 3.5 inch floppy disk driveClamping unit • Hydraulic mechanical 2-platen clamping system • 4 pressure cushions integrated in moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operator side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mmInjection and plasticizing • PV controlled injection unit • Thermoplastic plasticizing unit, wear-resistant design • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticizing possible • Plasticizing unit: SP12000 • Maximum processing temperature: 450°C • Injection embossing control adjustable on screen • Injection stroke control • Holding pressure control • Injection speed controlHydraulics, lubrication, cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max 31°C • Cooling water pressure: 4–6 barTemperature control • 8 temperature control circuits for hot runner • Adaptive temperature controllers • Maximum temperature controller power: 2 kW • 230 V temperature controller supplyMonitoring and software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage up to 20,000 cycles Nedpfx Ajyx Ez Roaajwf • Event log protocol • Alarm history • Graphical process curves • Trend graphics for 12 parametersInterfaces and connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • External temperature unit interface 20 mA • Central computer interface • BDE interface with 5 contacts • Potential-free contact for dosing unit

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Nsdpfxsyxrt Tj Aaaowf

Condition: ready for operation (used), Year of construction: 2011, clamping force: 2,250 kN, screw diameter: 60 mm, injection weight: 700 g, This Husky HL225 RS65 was manufactured in 2011. It features a clamping force of 225 tons and a screw diameter of 60 mm, optimized for high-speed PET preform production. The machine includes a platen size of 750 x 750 mm and an opening stroke of 500 – 550 mm. If you are looking to get high-quality injection moulding capabilities, consider the Husky HL225 RS65 electrical injection moulding machine we have for sale. Contact us for further details. • Clamping Unit • System: 2-platen • Tie bar distance: 510 × 510 mm • Platen size: 750 × 750 mm Nedpfxeyxnide Aaaewf • Opening stroke: 500–550 mm • Mould height: 200–600 mm • Injection Unit (RS65/60) • Injection volume: 565–650 cm³ • Injection pressure: up to ~2000 bar • Injection speed: High-speed (optimized for PET) • Electrical & Control • Technology: Full electric • Drive system: Servo motors • Energy consumption: Lower vs. hydraulic machines

Condition: new, Year of construction: 2024, TP turret punch presses With Durma TP series punch presses, you can achieve top quality with precise and fast turret, improved hydraulics and 3 automatic index stations. With movable platen, part unloader, automatic clamps, Cad/Cam software and control unit, Durma turret punch presses are easy to use. With automation systems that increase both work safety and productivity, user safety is also increased while reducing wasted time. Punching force: 30 tons Working area: 3.000+R x 1.500 mm X-axis movement: 3.000+R mm (repositioning) Y-axis movement: 1.500 mm Y-axis speed: 60 m/min X-axis speed: 70 m/min speed combined X+Y: 92 m/min max. stroke rate (in 1 mm steps, 1 mm sheet thickness): 1,100 1/min max. stroke rate (in 25 mm steps, 1 mm sheet thickness): 325 1/min max. marking speed: 1.200 1/min. main cylinder stroke: 40 mm max. punching stroke: 25 mm max. cutting capacity with fixed tool station steel: 6 mm max. cutting capacity with fixed tool station NiRo: 3 mm max. cutting capacity with index station Stah: 3 mm max. cutting capacity with index station NiRo: 1,5 mm Tool changer (27 stations without tool and holder): 11 x A-station fix: 0,8-12,7 mm 11 x B-station fix: 12,8 - 31,7 mm 2 x C-station fixed: 31.8 - 50.8 mm Nwsdpfxjg Admfs Aaaef 1 x D station fixed: 50.9 - 88.9 mm 3 x D-station index: 50.9 - 88.9 mm Positioning accuracy: +/- 0.1 mm Repeating accuracy: +

Condition: good (used), Year of construction: 2002, operating hours: 78,964 h, clamping force: 3,500 kN, screw diameter: 50 mm, clearance between the columns: 650 mm, displacement volume: 1,040 cm³, injection pressure: 1,575 bar, Make: Ferromatik Milacron Type: K- TEC 350- S Built: 2002 Location: Poland Technical Data Screw Dia: 50 mm Swept Volume: 1040 ccm Injection Pressure: 1575 bar Clamping Force: 3500 kN Tie Bar Distance: 650 x 650 mm Platen Size: 970 x 970mm Power: 83,1 kW Workinghours: 78964 h Dimensions: 8 x 1,8 x 2,5 m Weight: 16.000 kg Nodpfx Aaey Dcw Tjaewf Equipment Language: German , English Manual: Yes Airvalve : 4x

Condition: used, Year of construction: 2001, operating hours: 60,790 h, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Nsdpfxjh Tk Rvj Aaaswf Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: used, functionality: fully functional, pressing force: 150 t, pressure: 250 bar, Double-column hydraulic press equipped with two side cylinders connected by a platen for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and fitting of the rotor shaft, as well as shaft removal during repair operations. Features a retractable table for stacking and handling rotors and stators. MAIN CYLINDERS 150 t - 2 hydraulic cylinders of 75 t each, with a stroke of 750 mm, joined by a slotted platen with a central bore of 250 mm diameter. - Maximum usable height between cylinder platens: 1,300 mm. - Minimum usable height between cylinder platens: 550 mm. EXTRACTION CYLINDER - 1 central cylinder of 80 t, with a 1,200 mm stroke. - Prepared to fit an extraction clamp; rod end threaded M 35 x 1.50 pitch, 40 mm length. - Maximum usable height of extraction cylinder: 1,300 mm to the root of the rod thread. - Minimum usable height of extraction cylinder: 100 mm to the root of the rod thread. TABLE AND STRUCTURE - Mechanically movable slotted table, 1,200 x 800 mm, with a 600 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. Njdpfx Asxc Ekdeaaewf - Central bore on the table: 250 mm diameter; max. depth 550 mm. - Effective lifting capacity of the table for movement: 4 t. - Table traverse speed: 2,600 mm/min. - Internal front width: 1,250 mm. - Working height: 600 mm. HYDRAULIC POWER UNIT - Two-speed hydraulic unit, 5.5 HP, with automatic disengagement of rapid speed and independent speeds. Maximum pressure: 250 bar. - Digital control for maximum force during pre-pressing, pressing, and fitting; digital tonnage display. Pressure adjustment system via proportional valves. - Selector for approach and measuring speeds.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 14 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar (with 14 mm screw) • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 Nwjdpfx Ajyw I Azeaaef • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Nwodpew E E Evsfx Aaajf Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm Nwjdpfox Rqr Sex Aaaef - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN Nedsx D Dkxopfx Aaaewf This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-100 / Excellent technical condition Year of construction: 10.2004 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Injection pressure: 2000 bar Metering volume: 49 ccm Clamping unit: Clamping force: 50 t Distance between tie bars: 320x320 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total number of operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from the Sensor Kistler brand - mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Nsdey Dp Tbopfx Aaaswf Dimensions Weight: 2300 kg Length/width/height: 3.18x1.47x1.99 m Drive: Pump/motor: 15 kW Heating output: 4.9 kW Total output: 19.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm Nsdoy Dqa Aspfx Aaaewf size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Nodpfxoy Dqb Ho Aaaewf Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t Nodpfx Asy Dqcdjaaewf tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Nsdoy Dqutepfx Aaaswf Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Nwsdjy Dqztspfx Aaaof Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request