Used Plate Filter for sale (18,766)

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Ledpeztfxijfx Aklshl weight of the machine ca. 2 t

Condition: good (used), Year of construction: 2003, Screw compressor, compressor, stationary air compressor, plate heat exchanger -Manufacturer: Kaeser, plate heat exchanger heat recovery for Kaeser screw compressors -Type: PTG 141-281 Lhjdpfx Akez D T Tyelol -Volume flow rate: 1.48 m³/min -Technical data: see photo of the nameplate -Number: 2x heat exchangers available -Price: per piece -Dimensions: 810/385/H660 mm -Weight: 93 kg/unit

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Lhedpjyym Tdofx Aklol Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Handover in its current condition as inspected -Flatness: see photos (straightedge not included) -Mounting plate: with support ribs and heating device -Length: 2000 mm -Width: 1510 mm -Sheet thickness: 60 mm -Plate: with supporting ribs -Transport dimensions: 2000/1510/H880 mm Lsdpfx Akjikn Rvslshl -Weight: 1640 kg

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Lsdpfx Akjzbqquslshl Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Lsdpfez Avg Nex Aklshl Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1974, total length: 4,700 mm, total width: 1,800 mm, total height: 1,700 mm, Colour: Green Empty weight: 6.500 kg Price: On request - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 1361 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 3 Lhjdpfxez Avbae Aklel - Max. working width [mm]: 2000 - Top roll diameter [mm]: 200 - Bottom roll diameter [mm]: 160 - Transport dimensions: 4700mm x 1800mm x 1700mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE Ledpfx Aotrkmnoklehl 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER AUTO-DIAGNOSTICS

Condition: good (used), Year of construction: 1989, sheet width 2050 mm plate thickness 8.0 mm pre-bending capacity 6.0 mm upper roll diameter 190 mm lower roll diameter 180 mm bending speed 5.2 m/min work height max. ca. 980 mm total power requirement 5.5 kW weight of the machine ca. 3500 kg. range L-W-H 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears * for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device * Inclination of the side rollers by handwheels * Workpiece limitation for a cone with a 45° pitch: * Working length max: 60% * Bending capacity max: 50% - free-moving operation * electric delivery rollers * electric turning/rolling movement * digital position display of the reels - hardened rollers SAE 1050 CK 45 - Hydraulic folding store for removing closed pipes Lhjdpfxjz Dkzhe Aklsl - safety device (cable) - Original instruction manual + CE declaration * Machine link : ?machineno=1008-9401255

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Lhedpfx Akjv S Synjlsl Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: good (used), Filter system, clean air filter -Accessories: built-in adjustable fan, aluminum housing, without filter -Volume flow rate: 1060 m³/h -Number: 3x blowers available -Price: per piece -Dimensions: 560/1160/H340 mm Lhodpfsb A Shusx Aklol -Weight: 20 kg

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used roller, 1 meter wide Lhodpozi Sa Sjfx Aklsl Type: MRB 1001 E Capacity: 1050 x 1 mm (steel) Electric drive, left and right Year of manufacture: 2011

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Lhjdpfx Aoxtpwvekljl Capacity: 4300 x 6 mm Year of manufacture: 1987 Electric backgauge with NC readout Adjustable cutting angle

Condition: used, Year of construction: 1980, operating hours: 15,034 h, total length: 7,700 mm, total width: 2,300 mm, total height: 1,700 mm, Colour: Green Empty weight: 10.000 kg Price: On request - Year: 1980 - Documentation available: No - CE certificate present: No - Serial number: 1500 - Operating hours: 15034 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Power [kW]: 6.0 - Max. sheet thickness [mm]: 8 - Max. prebending thickness [mm]: 8 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 300 - Bottom roll diameter [mm]: 220 - Options: Cone rolling, Plate support - Transport dimensions: 7700mm x 2300mm x 1700mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Lhedozzwpcjpfx Aklel Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, each with 26 stations with divider plate suitable for 52 blocks : - dimensions 1 full block per station -> 1.070 mm x 530 mm Ledpfszx Ug Tsx Aklshl - dimensions 2 blocks per station -> 528 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.000 x 1.700 x 1.300 mm 26 blocks weighing ± 26 kg or 52 blocks weighing ± 13 kg ± 1.380 kg / Cycle (2h30)

Condition: used, each with 26 stations with divider plate suitable for 52 blocks : - dimensions 1 full block per station -> 1.070 mm x 530 mm Ljdpszx Ucuofx Aklohl - dimensions 2 blocks per station -> 528 mm x 530 mm max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.301 x 1.800 x 1.035 mm 26 blocks weighing 20 kg or 52 blocks weighing 10 kg ± 1.014 kg / Cycle (2h30)

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos Lsdozukp Aopfx Akljhl -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm -Transport dimensions: 3000/1255/H900 mm Ledpfx Akey S Rnislshl -Weight: 3500 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm Ljdoxm Sagepfx Aklshl -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: good (used), Extrusion tool accessories, extruders, spinning plate filters, filter belts -Spinning plate filter: Filter belt for spinning plate extruder/melt filter, bag of 5 pieces -Size: 1736 × 22 mm -Fineness/count of meshes: 60–250–100 mesh -Number: 20 bags available -Price: per bag -Transport dimensions: 250/60/H20 mm Lsdpfxsz Apb He Akljhl -Weight: 0.3 kg/bag

Condition: used, Filter system, clean air filter, fine filter, filter, compact filter, HEPA filter, filter cassette -Handover: in its current condition as inspected -Filter: slightly damaged, see photos -Manufacturer: Filt Air, Air filter type GT4-13AE-YACO -Front frame dimensions: 1210 x 600 mm, see photo of the type plate Lodsz Ahkajpfx Akljhl -Connection: Ø 205 mm -Quantity: 1x air filter included -Dimensions: 1210/130/H600 mm -Weight: 16 kg

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette Lodpfx Akjw U N Tuelshl -Manufacturer: AAF International, air filter type AstroCel ® II -Part No: 12-1210-0205 -Front frame dimensions: 570x1170x110 mm, see photo type plate -Number: 3x air filters available -Price: per piece -Dimensions: 1170/110/H570 mm -Weight: 11 kg/piece

Condition: used, each with 24 stations with divider plate suitable for 48 blocks : - dimensions 1 full block per station -> ± 1.056 mm x 530 mm - dimensions 2 blocks per station -> ± 528 mm x 530 mm Lhjdpfx Aszxrmdsklsl max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 3.319 x 1.600 x 1.120 mm 24 blocks weighing ± 26 kg or 48 blocks weighing ± 13 kg ± 1.248 kg / Cycle (2h30)

Condition: used, each with 38 stations with divider plate suitable for 76 blocks : - dimensions 1 full block per station -> ± 1.070 mm x 530 mm Lhjdpfozxrlaox Aklsl - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.548 x 1.600 x 1.120 mm 38 blocks weighing ± 20 kg or 76 blocks weighing ± 10 kg ± 1482 kg / Cycle (2h30)

Condition: used, each with 32 stations with divider plate suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm Ljdpfx Aozxrkvokljhl max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)