Used Plastickoil Concep Qs for sale (179)

Year of construction: 2018, condition: used, New: Yes Year of construction: 2018 Power: 119 kW (162 HP) Tjdpfey Anbbjx Akisd

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 245 h, load capacity: 3,600 kg, lifting height: 4,180 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,683 kg, total length: 2,340 mm, drive type: Elektro, construction width: 1,600 mm, Reach Truck Load center of gravity: 600 Fork width: 140 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 48V Tedpfjz Ev Tfox Akisd Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Dimos model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EQS4542FU. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Full free lift,

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22 °C ± 3 °C Humidity: Non-condensing, 20 % – 80 % Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Tedpezikcrsfx Akisd Light-emitting diode (LED) 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio frequency identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See pictures) Weight: approx. 35 kg (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, Todoxl Er Hepfx Akiod vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 245 h, load capacity: 3,600 kg, lifting height: 4,830 mm, free lift: 1,840 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,683 kg, total length: 2,340 mm, drive type: Elektro, construction width: 1,600 mm, Reach Truck Load center of gravity: 600 Fork width: 140 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Dimos model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EQS4542FU. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Todpfx Aksz Ev Uveiod Full free lift,

Condition: ready for operation (used), Year of construction: 2018, Medium: demineralized feed water (Aqua Purificata), max. vessel operating pressure: 5bar, max. temperature: 200°C, vessel volume: 300l, test pressure: 8.68bar, steam output: 300kg/h. The steam generator was designed as part of an overall system, however it has its own control and automation and can be used in separate operation. Documentation available. An on-site inspection is possible. Tjdpfxoygmb Te Akisd

Condition: used, Year of construction: 2011, gearing type: other, first registration: 01/2011, color: orange, mileage: 1,001 km, empty load weight: 750 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Roll-off salt spreader approx. 2.5m³ Salt spreader mounted on roll-off frame, 3800mm length to rollers! Salt spreader approx. 2.5m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Tedpeup Ht Tsfx Akijd - .

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, VC-999 QS8 + VC-999 K8T1A-SP ID.NO. 2922 VC-999 chamber machine with associated VC-999 wrapping machine which has previously been used for large whole cheese blocks. Dimensions 480 x 190 cm H 225 cm. Todpfx Ajv Iz Hvjkied

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0404546759, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 800 mm, total height: 2,100 mm, overall weight: 500 kg, input current: 5 A, input frequency: 50 Hz, workpiece length (max.): 1,000 mm, workpiece width (max.): 155 mm, Equipment: type plate available, Marposs – High-Precision Optical Measuring System for Crankshafts, Camshafts and Other Shafts Marposs is one of the renowned and well-established manufacturers of high-precision automatic measuring systems for a wide range of shaft types. These systems are suitable for use in both metrology laboratories and directly on production lines for quality control. Machine Description For sale is a Marposs optical high-precision measuring system designed for measuring cylindrical and eccentric workpieces, particularly crankshafts and camshafts with lengths of up to 1,000 mm. Condition and Operational Status The machine is fully functional. One crankshaft type has already been programmed, tested and calibrated. The system is therefore ready for measuring this specific workpiece type. Programming and Training Programming for additional workpieces is possible. Upon request, programming for new workpieces, measurement procedures and verification of measurement results can be carried out jointly at the seller’s or buyer’s premises. On-site training in the programming and operation of the measuring system can also be arranged. Applications - Crankshafts - Camshafts - Other cylindrical and eccentric shafts Tods Ad R Ibspfx Akijd - Workpieces up to 1,000 mm in length Inspection and functional testing are possible by appointment. For further technical information or inquiries regarding programming for additional workpieces, please feel free to contact us.

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Tedjzybu Tjpfx Akijd

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, Tjdpfx Aozmf Iqjkijd cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Tedjx Uqb Iepfx Akiod Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: new, Year of construction: 2025, We currently have 4 units of this model available. JCB G65QS Diesel Generator: 60KVA & DSE 7310 G65QS * 60KVA prime-rated * 3-year or 8,800-hour warranty * JCB DieselMax engine * Fuel optimized * Socket pack: 1 x 63Amp, 1 x 32Amp & 2 x 16Amp * 3-way valve * Central lifting point * Fork pockets Tedpfx Aksy Aiqwsijd * Engine sump pump * Bump stops * DeepSea 7310 control panel * Earth leakage protection * CE certification ----11914+11913+11912+11911 Errors and prior sale excepted.

Condition: new, Year of construction: 2025, Currently, we have 3 units of this model available. JCB G45QS Diesel Generator: 44.8 kVA CONSTRUCTION SPECIFICATION ----* Lockable maintenance access doors * Control panel viewing window * High-density fireproof foam * CE pack * Central lifting point * Fork pockets * 12V starter battery * Sump oil drain pump * Socket wrench cover Todpoy Aiqqefx Akijd * Deep sea electronics control panel * Bunded base fuel tank TECHNICAL SPECIFICATION * Prime power: 41 kVA * Length: 2250 mm * Width: 840 mm * Height: 1350 mm * Weight: 1070 kg * Total fuel capacity: 77 L * Fuel consumption: 7.06 L/h * Noise level: 66 dB(A) ----11917, 11916, 11915 Vehicle number: Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control Tedpfx Aksxnb Hfjiod – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Year of construction: 2022, condition: used, New: Yes Todpsy Am T Asfx Akijd Year of construction: 2022 Power: 142 kW (193 HP)

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Tedoxk T Ndopfx Akisd Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Compressed air: 7 - 8 bar Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 for Müller Martini Tempo saddle stitcher. Good condition Tedpfxjxfwvqo Akiod

Condition: excellent (used), SINGLE SIDE EDGE BANDER (RIGHT) Edges (band in rolls) thickness (Min/Max) mm 0,3/ 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 8 Panels thickness (min/max) mm 8 / 60 Numerical Control POWERTOUCH Feeding speed (adjustable) m/min 8 - 14 Top pressure system with rubber wheels Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) (2 x Kw 2,2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) QA65 N Edge coils supporting unit (reels N°) 1 Tedszyahxopfx Akijd Snipping (end-cutting) (2 x Kw 0,22) Fine Trimming unit (2 x Kw 0,55) Corners Rounding (contour trimming) (1 x Kw 0,35) Profile edge scraping unit MZ40 Glue scraping unit Buffing unit (2 x Kw 0,09)

Condition: new, color: yellow, power: 1,000 kW (1,359.62 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 1,850 mm, Year of construction: 2007 Empty weight: 5.840 kg Generator capacity: 750 kVA Tjdpfxjyxmwys Akied Current frequency: 50 Hz Voltage: 400

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Todpey In A Aefx Akisd Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: good (used), Technical Data for Shelving Trolley: Shelf System: Dexion Type: HI280 Scope of delivery includes: 01x Shelving trolley, used Material finish: Sendzimir galvanized total width with handle: approx. 1,490 mm total width without handle: approx. 1,340 mm total depth: approx. 625 mm total height with castors: approx. 1,965 mm total height without castors: approx. 1,805 mm Number of levels: 3 pcs Number of boxes per shelf: 9 pcs Consists of: 02x Uprights, used Material finish: Sendzimir galvanized Frame profile dim.: 50x55 mm Slot pattern: 25|25 mm incl. base plates (Uprights are pre-assembled) 1,805 mm high 610 mm deep 03x Shelves, used Type: S Material finish: Sendzimir galvanized Dimensions: 1,275x575x30 mm Weight: 4.37 kg each Max. load per shelf: 100 kg (with evenly distributed load) 03x Shelf beams, used Version: for shelves Material finish: Sendzimir galvanized Clear span: 1,275 mm Z-profile: 50 x 25 mm Weight: 0.840 kg each 01x Mesh shelf, used Material finish: Hot-dip galvanized total width (TS): approx. 1,380 mm total depth (QS): approx. 625 mm Mesh size: 75 x 35 mm Load bar: 28 | 1.50 mm Tjdpfx Akjxl Sawoied 09x Collapsible box, used Material colour: grey Dimensions: 600 x 400 x 400 mm 02x Swivel castor, new Wheel material: polyamide Wheel colour: cream white total height: 130 mm Wheel Ø: 100 mm Wheel width: 35 mm 02x Twin-braked swivel castor, new Wheel material: polyamide Wheel colour: cream white total height: 130 mm Wheel Ø: 100 mm Wheel width: 35 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipping required is subject to extra costs, which can be requested separately depending on delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Tjdpfx Ajwkpzljkied Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Condition: used, Used agitator with scales Item number: 10824 Last use: Pharma Type: Upright on 4 castors Material (wetted parts): 1.4301 / AISI 304 Container dimensions: Total width: 500mm Total length: 1500mm Todpfx Akout U Tpsiod Total height: 1560mm Facilities: Type plate: yes Agitator: beam shaft length: 355mm Stirrer: Ø180mm Scale

Condition: new, Year of construction: 2026, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz Tedpfevk R Arsx Akiod - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -