Used Plastic Welding Machine for sale (94,224)

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Hnsdpfsxdda Hsx Aacju

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Application Types Welding Hodpsw S N Dnjfx Aacenu

Condition: good (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 16 A, Equipment: type plate available, Migatronic TIG DC HP Excellent TIG welding machine with the best working settings. Designed for complex welding tasks in the field. Hnodpfx Ajvbyazjacsu The ideal service and assembly machine.

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Hnjdougv S Sjpfx Aacju

Condition: used, current capacity max 114 kVA throat 550 mm contact pressure capacity . kp Hodpfx Aaow Nrvnjcjnu weight of the machine ca. 290 kg Little used, in good condition, comes from a public institution including water cooling unit

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (max.): 250 A, For sale: Lascentrum Multimig 250-3 Dual Pulse 250 AMP 400 Volt Gas-cooled Pulse Double Pulse Synergic 2/4 Step 4 Roller drive Steplesly adjustable Program memory Burnbacktime adjustable Stick option Steel, Inox, and Aluminum weldable Refurbished and tested Including SB360 Mig welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Hsdpfsw Hlm Asx Aaconu All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2018, condition: ready for operation (used), 3 identical welding machines are available. Very little used. Standard: EN 60974-1, three phase 3~400V 50Hz. Rated values at X 40°C: 5A 10V, 350A 24V 40 percent, 320A 22.8V 60 percent, 280A 21.2V 100 percent for one operating mode, another operating range 5A 20V with 320A 32.8V 40 percent, 290A 31.6V 60 percent and 260A 30.4V 100 percent, U1 = 400V, protection class IP23. It is an inverter controlled TIG MMA welding power source with max. 350A, digital control and memory functions, pulse function adjustable from approx. 0.5Hz to 2kHz, HF or lift ignition, adjustable parameters such as gas pre flow and post flow, slope up and down, balance and various waveforms sinus square etc., PFC technology for high efficiency and operation on generators, remote control or foot pedal connection, thermal monitoring and fault diagnosis with error codes, optional water cooling unit KG 10. An on-site inspection is possible. Hsdpfx Aexdda Teaconu

Condition: good (used), Year of construction: 2008, – Capacity 35 kVA – Pneumatic – Throat depth 400 mm Hedpfxsw Tuirs Aacsnu – Control TE 90 Mark II – Documentation – 400V

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 16kVA Short circuit-current: 17kA Hsdpfx Aexcx Ntoacjnu Electrode force: 17-178daN Throat depth: 180-500mm --- Weld control: MPS 15036 (5-times, 1-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Hitachi 300A DT-NP 3 VT - without additional accessories - shipping possible at an extra charge Hnsdpfx Aasxb S Utecou

Condition: excellent (used), Parallel-guided, water-cooled table spot welding machine Manufacturer: DALEX Model: PMS 10-4 T Throat depth: 350 mm Rated power at 50% duty cycle: 32 kVA Secondary short-circuit current: 38.3 kA Secondary open-circuit voltage: 2.3 - 4.6 V Electrode force: 65-390 daN 8-position selector switch Single-stroke cylinder Foot pedal with machine table and CrNi steel shelves on left and right External control MPS 200 Operating manual in German Sample photo Hedpfxoxapc Se Aacsnu

Condition: new, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, type of cooling: air, welding current (min.): 50 A, welding current (max.): 300 A, For sale: Hnsdpfxow Hcibe Aacsu DAIHEN Varmig 301-i LCD 50-300 AMP 400 Volt Synergic Gas-cooled 2/4 Step 4 Roller drive Post gas Soft start Elektrode option Steel and Stainless Steel weldable New Including SB250-3 Meter MIG/MAG Welding torch, earht work lead with clamp, gas cable, pressure regulator, 0,8-1,0-1,2mm Steel + Stainless Steel feed rolls and 12 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2021, condition: ready for operation (used), 20 identical welding machines are available. Type: cool41 U31, standard: IEC 60974-1, -2, -10 C.L.A, mains voltage: 400V, frequency: 50/60Hz, protection class: IP23, power consumption P min: 0.9kW, cooling capacity P max: 0.35MPa (3.5bar), max. current consumption: 2.5A, length: 539mm, width: 210mm, height: 415mm, weight: 22kg. Control: Comfort 2.0 with intuitive operation via click wheel, pulse spot normal mode continuously adjustable (especially for TIG welding), pulse pause ratio (balance) adjustable for example from 10-90%, Hz and kHz pulses up to approx. 15kHz, ActivArc technology dynamic arc control to ensure constant performance despite distance fluctuations and to prevent electrode sticking, improved root and penetration quality, spotArc Spotmatic functions for spot welding and tacking, 2-stroke and 4-stroke mode depending on torch trigger operation, manual metal arc welding often with MMA pulse automatic also integrated, gas pre-flow and post-flow times adjustable, upslope and downslope times also controllable, torch modes via torch trigger such as reduced secondary current, memory and job storage recurring welding tasks can be saved depending on version approx. 8-100 jobs, energy efficiency high efficiency, standby function available. Remote control and interfaces remote adjusters and functional torches can be connected, optional LAN WiFi gateway ewm Xnet, PC interfaces for parameter setting and monitoring. Very little used. An on-site inspection is possible. Hnsdpjxdc Upjfx Aacju

Condition: used, The machine is fully operational and ready for work. Hsdpfjxn Uvgox Aacenu

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Hsdpfxowxfggs Aacjnu Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.

Condition: new, Year of construction: 2025, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Hnsdoizr Rlopfx Aaceu Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, Year of construction: 1978, sheet width . mm Hodpfx Ajucgvaoacenu plate thickness . mm serial number 20719 total power requirement . kW weight of the machine ca. 1,4 t

Condition: used, Dalex Works Pms 10-2 380V 50Hz rated power at 50 duty cycle: 63 kVA secondary short circuit current: 45 kA rated primary voltage 380 V - 50 Hz open circuit voltage of 5,6 V Hnsdpfog Rcpxsx Aacsu electrode force: 65-390 daN Machine weight 341 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, nominal power at 50% duty cycle: 10 kVA, type of cooling: water, overall weight: 81 kg, welding power (max.): 10 kVA, air pressure: 6 bar, Welding machine, new, for sale due to changed circumstances. Unfortunately, it's a bit too small for my needs. Affordable machine for simple applications. Original price: €2,200 (net, excluding VAT). It's just sitting around, so I'm offering it now at a very low price. Hnjdpfx Aaewzk Rvecju

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 2 pcs. Cloos MC 3 353 welding machines, year of manufacture 2010 and 2011, in excellent condition. These units were used in a training workshop and are in TOP CONDITION. Function test, inspection and welding test will be carried out before delivery. 1 Cloos welding machine MC 3 353 incl. wire feeder, 1 m connection hose package, 5 m ground cable, 5 m power connection cable, wire spool adapter, Euro central connection. Cleaning, maintenance and BGAV inspection included. Hnodpfow Hxcwox Aacsu

Condition: new, Year of construction: 2025, functionality: fully functional, Product Description Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model featuring a 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser welding – precise, deep, and virtually distortion-free Laser cutting – ideal for thin sheets up to approx. 4 mm Laser cleaning – effectively removes rust, paint, and oxidation Weld seam cleaning – instantly cleans seams right after welding 📌 Technical Specifications: Laser power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Optical fiber: 10 meters Cooling: Integrated water cooling Operating modes: Welding, cleaning, cutting, pulse Voltage: 3×400V / 50–60 Hz Hnodpfx Aew Tfbrsaceu Welding speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Scope of Delivery: 1× LMH1500 Fiber Laser Welding Machine 1× Handheld welding gun including nozzles 1× Automatic wire feeder 1× Laser safety goggles 1× Operating manual (German) 1× CE declaration of conformity 1× Risk assessment according to Machinery Directive 💼 Areas of Application: Suitable for stainless steel, galvanized sheet metal, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal fabrication, body shops, or maintenance operations. 🔒 Certified & Safe: CE certificate including risk assessment according to EU directives. Delivered with all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: By freight forwarding (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate operation!

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Hsdpfx Aaow Rm Sascsnu Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: used, Year of construction: 2009, 2009 current intensivity 300 A wire dia. 1 mm sofort einsatzbereit 239836 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Hnsdpfxjibd Uaj Aaceu +++++

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Model: BAS 100. Flash Butt welding Machine for Band Saw Blades. Hydraulic clamping. Annealing pyrometer. Hydraulic weld de-burring tool. Blade positioning device. Year of manufacture: 1994. Automatic annealing temperature control. Hnodpfsw Snqmjx Aacou Welding strip up to 100 mm. Bimetal strip up to 80 mm. Connection: 400 V. Weight: 500 kg. Dimensions (W*D*H): 1400*900*1500 mm. Operating instructions and packing included.

Year of construction: 1995, condition: used, machine/vehicle number: 7393, Esab Air Assisted Spot Welding Machine Type: ZRED 164 Date: 1995 S/N: 7393 380V AC Length: 1950mm Width: 600mm Height: 2400mm Hsdpfspuy Ayjx Aaconu