Suction and Filtering System

Krämer VFM-P/VKA-P/VFM-R/GFS Shake 160 25 250

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Gsdpfxovvizke Ambjiw Storage location: Garbsen

Condition: as good as new (ex-display), Year of construction: 2011, Used steel storage tank according to EN 12285-1 (with test certificate), double-walled, for underground storage of heating oil and diesel fuel, 1 dome (2 domes also possible as an alternative). Capacity: 100,000 liters Diameter: 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg In addition, we can equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detectors Giedpfji Enxdox Ambew - Dome shaft with shaft cover in a walkable or drive-over design - Partition walls (as a multi-chamber tank) - Internal coatings (e.g., 2K epoxy resin), partial or full linings - Content and level measuring devices, as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Fuel dispensers for diesel, biodiesel and gasoline – with complete tank data recording on request - External tank insulation with PU foam The tank is cleaned internally, and the external coating has been fully refurbished and tested at 14 kV. Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and we will provide you with the exact shipping costs immediately. If you require any further information, please call us or send us an email. Trade-in and purchase of tanks/containers is possible; please contact us for details. Delivery time upon agreement! We also have the following sizes of these tanks in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Year of construction: 2013, condition: used, Features: Giodpfjiuqcwsx Ambow * Used telescopic belt conveyor * Condition: fully functional, with signs of wear * Ideal for fast material transport * Professionally disassembled and packed * Incl. feet * Incl. control cabinet * 3 units in stock * Price per unit Technical data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800-4x16 Belt direction: loading and unloading Color: anthracite gray Overall length, retracted: 5,550 mm Overall length, extended: 16,000 mm Overall width: 1,500 mm (incl. control cabinet) Width: 1,220 mm Belt width: 800 mm Condition: good (used) Belt type: smooth / black Conveying height: 1,100 mm Weight: 3,300 kg Two speed levels can be set. Telescopic belt conveyor The telescopic belt conveyor is ideal for linking machines or workstations in the picking area and optimizing internal processes. During transport, the telescopic belt conveyor can transport sensitive and differently sized containers, boxes, or other packaging and article units to the delivery or collection point and can also be used as a connecting section before or between production and processing machines. In addition, it enables efficient parts transport within the company and warehouse and is used for conveying significant quantities of goods over long distances. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully completed projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to spend three minutes on a phone call than to exchange emails for three days. TSWi 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan is installed in the wall Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust pipe: 400 Ø mm Depth: 900 mm Double filtration: Paper filter + Paint stop filter mat Clamping bar (+ EUR 150.00 net) Options/additional cost for: Transition from square to round: EUR 150.00 net Paint stop filter mat with clamping bar: EUR 150.00 net Side guide plates with hinge: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with a supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us. Godjfr T Eqjpfx Amboiw

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR Godpfx Aofnvwqjmbsiw - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2020, condition: refurbished (used), Dear customers, Our experience has shown that communication via email often unnecessarily prolongs the process. We would like to help you quickly, and for that, it is better to have a three-minute phone call than to exchange emails for three days. TSWi 30.20 Dry spray booth Dimensions: 3000 x 2000 mm W x H Fan is integrated into the wall Gsdpfefr T Emox Amboiw Airflow: 10,800 m³ / h Motor: 2.20 kW, explosion-proof Exhaust pipe: 500 Ø mm Depth: 900 mm Double filtration: paper filter + Paint stop filter mat Clamping strip (+180 EUR net) Options/surcharge for: Transition from square to round: 150 EUR net Paint stop filter mat with clamping strip: 180 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: ready for operation (used), Anti-spark centrifugal extractor fan Cardboard filters “Paint-Stop” filter Electric panel with IP55 protection class Ceiling light with IP65 protection class Emergency push-button Discharge hopper Godpfx Amsw Rpxcsbeiw

Condition: used, Year of construction: 2007, Used machine Giodpfx Aswt E Uysmbsw Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area 4,200 x 2,100 x 50 mm - CE mark - Rear full enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel on saw carriage - Reinforced 4 kW motor - With strip cutting device - Folding stops and aluminium central support - Retractable slatted frame for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Availability: short notice Location: Hesse

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Main saw blade projection: 125 mm Godpsv Ir Scjfx Ambeiw No of Grippers: 11

Condition: excellent (used), O04018) No. 1 FILTER (Suction sub-station) - Total air flow 18,000 m3/h (estimated) _____ O04019) N° 1 FILTER (Suction Sub-stations) - Total air flow 50,000 m3/h (estimated) - Power KW approx. 90 _____ O04020) N° 1 FILTER (Suction sub-stations) - Total air flow 45,000 m3/h (estimated) - Power KW 30 approx. _____ O04021) No. 1 FILTER (Suction sub-stations) - Total air flow 45,000 m3/h (estimated) - Power KW 55 - No. 360 filter bags (each diameter mm 123 x mm 3000 H) _____ O04022) N° 1 FILTER (Suction sub-stations) - Total air flow 36,000 m3/h (estimated) - Power KW 55 - No. 360 filter bags (each with a diameter of 123 mm x 3000 H) _____ O04023) N° 1 FILTER (Suction sub-stations) - Total air flow ????? m3/h (estimated) - Power KW 30 - No. 180 filter bags (each with a diameter of 123 mm x 3000 H) Gisdpfx Aswrdw Rjmbow