Used Plasma Cutting Tools for sale (42,435)

Condition: used, Year of construction: 2019, CNC gantry plasma cutting machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console Cedpfoyay H Aox Aptjrf 1 x Drilling spindle, 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä22726

Condition: excellent (used), Year of construction: 1994, Metal cutting Tooling COLOMBO & LENNA - 600 Crodpfxszc Ix Eo Aptjf MACH-ID 4214 Make: COLOMBO & LENNA Type: 600 Year: 1994 Diameter: 600mm 4 chuck: x Spindle bore:115mm Connector: 11 Diameter 600 mmConnection Camlock 11Bore 115 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, Metal cutting Tooling SMW AUTOBLOK - W-325-S MACH-ID 5119 Crsdpfezc Ivqsx Aptjf Make: SMW AUTOBLOK Type: W-325-S Year: 2009 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Metal cutting Tooling KITAGAWA - H0H - 06K MACH-ID 5205 Make: KITAGAWA Type: H0H - 06K 3 chuck Cedjzc Itcjpfx Apterf Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, Metal cutting Tooling SMW AUTOBLOK - 210 BB MACH-ID 5208 Make: SMW AUTOBLOK Type: 210 BB Year: 2010 Crsdpezc Iq Uefx Aptsf 3 Chuck Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, Metal cutting Tooling NIKI AG - 90 Niki AG machine vice / clamping system 90 mm MACH-ID 6393 Make: NIKI AG Type: 90 Year: 2020 Grinded clamps 0,02 mm Clamp force 2 T Modulare setup Flexibel& Compatibel Crjdpfxjzc Ilfo Aptof Clamp width: 90mm Max. opening: 400mm Manuel or hydraulic: Manuel Number of matching vices:10 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6435 Make: NIKI AG Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Manuel or hydraulic: Manuel Cjdpfezc Iknex Aptjrf Number of matching vices:10 Length: 340mm Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6436 Make: NIKI AG Csdpfx Aozc Ii Roptorf Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Manuel or hydraulic: Manuel Number of matching vices:10 Length: 340mm Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Crsdjx Dlwmopfx Aptef Cutting thickness: 50 mm piercing 80 mm cutting Beuting extraction table without filter system Software: Omniwin with Bevel ä22726

Condition: good (used), Steady rest COLCHESTER Magnum Credjzcnw Iopfx Aptsf Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, overall weight: 63 kg, chuck outer diameter: 315 mm, Metal cutting Tooling SCHUNK - ROTA-M flex 315 2+2 MACH-ID 9634 Crsdezcnn Tspfx Aptef Make: SCHUNK Type: ROTA-M flex 315 2+2 Year: 2019 Product Features: 4-jaw compensating chuck Centric compensation of opposing jaws Spindle mount: ISO 702-4 No. 8 (Z220) Jaw interface: 1/16" x 90° Nut 17H7 Technical Data: Stroke per jaw: 9.5 mm Compensation stroke per jaw: 5.1 mm Maximum clamping force: 100 kN Maximum torque: 120 Nm Maximum rotational speed: 2200 rpm Weight: 63 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2004, condition: ready for operation (used), A mechanized Kjellberg CNC plasma cutting system is offered. Cutting current range: 40A-200A, duty cycle: 100%, output power: 200A at 150V, lower operating point: 60A at 104V, material thickness range: approx. 3mm-60mm, maximum piercing capacity: approx. 30mm, applicable plasma gases: air, oxygen, argon/hydrogen mixture, nitrogen, suitable materials: mild steel, stainless steel, aluminium, electrically conductive materials. Dimensions: approx. 980mm/644mm/1320mm, weight: approx. 370kg. Inspection possible by arrangement. Cjdpfezmh T Nox Apterf

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h Crjdpjzpwcfjfx Aptef For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. We look forward to your inquiry.

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Cjdpfx Aszgu Rnoptsrf Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Crodpfxjykqwtj Aptsf Working area: 4 x 2 m Equipment: 1 KMT OEM SL-VI 50 PS 4,000 bar cutting head with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source High-voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive metering system Collision protection system Water treatment system TCI HIDROSYSTEM 2.0 Sludge removal system Software: Lantek Expert 2D with automatic nesting function 22726

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source Automatic gas console Includes automatically rotating plasma beveling unit Bevel System 2015/350 Downflow 3DFP9-SP filter system Power: 9 kW Cedpfxjw Rpvbs Apterf Laser diode 22726

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma cutter with Kjellberg HiFocus 161i power source Prepared for retrofitting with an oxy-fuel torch Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control Codjy Auxmopfx Aptsrf ä22726

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of manufacture: 2014 Operating hours approx.: 7,024 Control system: iMSNC Working area: 3,000 x 2,000 mm 1 Plasma torch power source Kjellberg HiFocus 280i neo with universal gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without fume extraction 1 x nesting software Asper Win Basic + automatic nesting on the machine control system 22726ä Codpfoypdl Ijx Apterf Universal gas = enables changing the gas to adapt the cutting quality and cutting speed to the material.

Condition: used, Year of construction: 2005, CNC gantry plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) Credpfxoykruas Aptjf 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and track ä22726

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas control unit Cjdpsyhd Rbjfx Aptorf Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate ä22726

Condition: good (used), Year of construction: 2008, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm Cjdpfx Apsiff Dastsrf 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC We have our own technicians available for installation, commissioning, and training! All spare parts are in stock. 22726

Condition: used, Year of construction: 2011, CNC gantry plasma cutting machine Manufacturer: Eckert Type: Jantar 2 Csdpfxey Nqcbe Aptorf Year of manufacture: 2011 CNC control Working area: 2 x 4 m 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console Extraction table 22726

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Csdezizkyopfx Aptjrf Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. Crjdpfx Apszdz U Uetef It has been disassembled and stored since 2022. Original new price: 450,000 euros.

Year of construction: 1999, condition: ready for operation (used), A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment. Crsdpfx Apezklgbotef