Used Plants for sale (3,024)

Condition: ready for operation (used), Year of construction: 2017, A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Bedpfx Acsy H I Hle Towt

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Bwodsv Sugqspfx Ac Tot

Year of construction: 2008, condition: ready for operation (used), A complete bulk powder coating system MEEH powder coating and dust filter system is available. Product dimensions X/Y/Z: 8000mm/800mm/3000mm, max. product weight: 1000kg, total surface area of all openings: 12.9m², max. permissible powder injection quantity: 90kg/h, extraction capacity: 18000m³/h, total system dimensions X/Y/Z: approx. 28m/13m/6m, compressed air requirement: approx. 38nm³/h, compressed air: 8bar, connected load: approx. 30kW. 1) Manual powder stand with suction, internal dimensions X/Y/Z: 10m/3m/4m, external dimensions X/Y/Z: 10040mm/3370mm/4600mm. 2) Chamber dryer MEEH KTÖ240, year of construction: 2008, air capacity: 30000m³/h, heat output: 240kW, burner: Weishaupt, burner year of construction: 2019, fuel: heating oil, internal furnace dimensions X/Y/Z: approx. 8530mm/4610mm/5840mm, external furnace dimensions X/Y/Z: approx. 8200mm/3500mm/4000mm. 3) Lifting and lowering station with 2 chain hoists H/S 160, year of construction: 2008, speed: 4m/min, max. load: 2x500kg, lower edge of traverse - floor distance: approx. 3700mm. 4) Electric traversing platform EQ 160, year of manufacture: 2008, max. load: 2000kg, speed: 12m/min, max. traverses: 3, total traverses: 14, total traverse positions: 14, traverse length: 8m, load: 1000kg. Documentation available. On-site inspection is possible. Bedpfswr Dv Hex Ac Tewt

Year of construction: 1996, condition: ready for operation (used), A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible. Bwsdpfxozidh Ij Ac Tot

Condition: new, functionality: fully functional, power: 196 kW (266.49 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO PRO Serie is a mobile type closed circuit crushing plant that is suitable for especially limestone and other types of stones with hardness level is soft or medium. MAIN FEATURES: * Closed circuit crushing till to get desired size of product Bwsdpezi Uyzjfx Ac Tst * Capacity is variable according the material feed and final product dimensions to be crushed. * All equipments are assembled on single special heavy duty construction chassis, transportable by 1 truck. * Conveyors are foldable * Up to 3 different sizes of aggregates * Since the whole plant is built in one chassis, it has the advantage of the fastest production line * PRO Serie Mobile Crusher Plant can be used by single operator, feed can be done by truck, loader or excavator * Plant can be installed in 2 days with its special heavy duty construction chassis * With its multifunctional primary impact crusher, plant can crush different product sizes with high capacity * It is equipped with 3 axle, air-controlled brake system and signaling system. * Hydraulic system is controlled by remote system * All motors are under protection with metal sheet covers * The dust suppression control system prevents dusting by conveying high pressure water. * Mobile system has complete fully automation system. Also the plant can be controlled by using tablet with single staff. PRO 90 CRUSHING AND SCREENING PLANT -Bunker: 20 m3 -Plant Dimensions: 16870x4552x4627 mm -Production Capacity: 90-130 Tons Per Hour -Crusher Type & Rotor Size: Turbo Impact – 1100x900 mm -Maximum Feeding Size: 500 mm -Vibrating Screen Size and Deck: 1400x4000 mm 3-4 decks -Total Motor Power: 196 Kw -Generator Capacity: 400 kvA → PRO 90 IS A COMBINATION OF : • Bunker • Vibrating Feeder • Turbo Impact Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2020, operating hours: 48,000 h, functionality: fully functional, type of input current: three-phase, power: 999 kW (1,358.26 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 12,520 kg, type of cooling: water, nominal power: 999 kW (1,358.26 HP), input frequency: 50 Hz, input current: 1,442 A, empty load weight: 11,730 kg, temperature: 25 °C, ambient temperature (max.): 25 °C, Equipment: documentation/manual, We offer this complete Caterpillar 2020 combined heat and power (CHP) unit, manufactured in 2020, including gas cooling, gas control system, and oil tanks. Manufacturer: Caterpillar Serial number: 1655973 Date of manufacture: 06/2020 Rated power: 999 kW Rated power factor: cos phi 1.0 Rated frequency: 50 Hz Bwedpfxjzwqczs Ac Tet Rated voltage: 400 V Rated current: 1442 A Weight: 11730/12520 kg Power class: G2 Fuel: Biogas Standard: ISO 8528-5 Manufactured in: Germany If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2022, operating hours: 2,806 h, functionality: fully functional, Equipment: Bsdpfx Acjwnfwqe Tswt Basic Package Inventhor Type 6 Load-sensing system Fuel tank 500 liters Longitudinal conveyor: length 2,900 mm, width 800 mm Centrally arranged lubrication strips 24V electronic control – additional electric pump to operate the following functions when the engine is off: "raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Service ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Special Equipment: Powertrain 310 kW - EV 3-axle drawbar trailer chassis unit Shredding system Size L 600/4 - 30 Z Additional hydraulic connections 35 - 80 l/min Hydraulic drive Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Year of construction: 2001, Konig Rex Futura bun roll line T6 S-MKB/1- SK58 Konig Rex Futura 6/5/4-row headmachine SK58 year of build 2001 weight range 35-85 gram Bwodpoxvqv Eofx Ac Tjt cap. 9000 pcs/h with Lippelt moulding and setting device year of build 2005 pictures BEFORE reconditioning

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. Bodpfjtziudex Ac Tswt The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Bsdpsyffqqofx Ac Tjwt Price negotiable.

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Container: Permissible operating pressure: 1 bar / -1 bar Bjdpfeyx Sxcex Ac Tewt Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, E-scrap processing plant with hammer mill, magnet, and re-separation system Feed conveyor Bwedpfxsztp D Ae Ac Tot Erdwich HA800 hammer mill Soundproof enclosure Knock-off belt THM Overband magnet ERIES Elevator belt Vibrating feeder for re-separation Re-separator IMRO Frames Control cabinet Additional rotor for hammer mill, in new condition Additional spare parts for hammer mill

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Damak 176-pocket intermediate proofer with adjustable timings for dough resting. Fitted with removeable pockets for ease of cleaning. Manufacturer - Damak Makina. Model - DM IP 176. Date of manufacture - 2021. Input height - 800mm. Bsdpfx Acsx I Sn Nj Tewt Output height - 1550mm. Electrical requirements - 415 V / 50 hz / 3 phase. Power - 5 kW / 13 Amps. Please note - the front panel is missing on this machine (as per photos).

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Bwodpfx Acjflz Hdj Tjt A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material - Warranty available upon request! Bwodew N Rv Tspfx Ac Tot - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s Bsdpfxezl Shzj Ac Tswt • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: excellent (used), Year of construction: 2009, Filter with under-filter hopper, ERMONT model, for asphalt mixing plant. Bodszf Nbfjpfx Ac Tewt Year: 2009

Condition: excellent (used), functionality: fully functional, Natural Dye Mixing Installation Installation for mixing natural dyes consisting of: 2 stainless steel tanks with agitator Bwedpfjw Dfxgox Ac Tst Internal dimensions of each tank: ø 590 mm x 850 mm External dimensions of the tanks: ø 600 mm x 1650 mm Manifold with 7 valves Manufacturer: GEA Tuchenhagen GmbH Dosing pump Manufacturer: Sera GmbH Flow meter Manufacturer: Endress+Hauser Type: PROMAG A Stainless steel control cabinet Manufacturer: APV

Condition: refurbished (used), Year of construction: 2022, operating hours: 4,577 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Bedeyhckmjpfx Ac Tswt Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: refurbished (used), Year of construction: 2023, operating hours: 5,189 h, functionality: fully functional, power: 390 kW (530.25 HP), year of last overhaul: 2026, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with EUROMOT V emission standard - Auxiliary hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gear, 380 kW – VARIO – - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor belt: belt length 4,450 mm, belt width 1,000 mm - Centrally positioned lubrication strips - 24 V electrical control system - Additional electric pump for the operation of the following functions when the engine is off: “raise/lower/fold rear conveyor, open/close comb flap, open/close comb, optionally raise/lower permanent magnet belt, optionally raise/lower folding hopper” - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Loading protection on both sides - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint: RAL2011 deep orange Additional equipment: - 500 mm flat chain undercarriage unit - Watering system with hopper extension H=300 mm on both sides - Size "L" shredding system – VARIOMAT (Variomat system L600/4 – 42 teeth) - Rear conveyor length 7 m, width 1200 mm - Size "L" "Limiter" (20 pieces) - LED light package for engine compartment and rear - Central lubrication system with pump Bjdpfxsyu Snus Ac Tjwt Delivery date to be arranged.

Condition: like new (used), Year of construction: 2020, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 1455607, fuel: liquid petroleum gas (LPG), Jenbacher JMS612 in a container Electrical output: 2004 kW Thermal output: 2244 kW First commissioning: November 30, 2020 Operating hours: 14,800 h Condition: Like new Bwodpfx Acjztw Naj Tjt System is still in operation. Full maintenance contract was in place until recently. Includes flue gas cleaning system (suitable for horticulture).

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel. Bjdpfsyhc Rgsx Ac Tswt

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Bsdpfsnxk Ixjx Ac Towt

Year of construction: 1993, condition: ready for operation (used), Includes aggregate weigher, cement weigher, water weigher, additive weigher, special material weigher, Schlossermixer and Biotronik control system, documentation available, on-site inspection is possible. Bodpfx Ajq Ttz Tsc Tjwt

Condition: ready for operation (used), A tower shearing plant is available, plant contains (1) Trough goods storage, for material stock approx. 100-150m, max. fabric width: 5000mm (2) Steamer Fleissner, stainless steel, max. fabric width: 5000mm. (3) Main Drive Roller Menschner, cast roller Monforts, year of construction: 1987 (4) Tower Shearing Machine Menschner NTS-T-III, year of construction: 1988, fabric width: 300x5500mm, with three shearing cylinders (5) Control panel for auxiliary drives, deflection, transition bridge, roller fabric storage ETF, year of construction: 1988, storage capacity: approx. 80 running meters, with two center controls Erhardt+Leimer. Bwjdoi Atnfopfx Ac Tst