Used Plan Lathe for sale (9,273)

Condition: used, Year of construction: 2017, turning diameter 340 mm turning length 1000 mm Njdpfxey E Txds Aaaocr control Mazatrol SmoothC

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Travelling steady 3 jaw chuck manual All manuals present Ncedpfx Ajy D Taleaasr

Condition: good (used), lathe pressing tool, roller block, support roller -Support roller: solid design -Roller: Ø 145 mm -Square: 73 x 26 mm, clamping length 180 mm Nsdpewvfwgjfx Aaascr -Quantity: 1x roller stand available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/pc.

Condition: good (used), Year of construction: 1970, Centre height over bed: 2,100 mm Centre distance: 15,000 mm Faceplate (table) diameter: 3,500 mm Maximum swing diameter over faceplate: 3,120 mm Maximum swing diameter over bed: 4,150 mm Maximum swing diameter over carriage: 3,600 mm Maximum workpiece weight between centres: 180 t Nodpfx Aasy E N Afjaecr Bed width across guideways: 4,200 mm Bed height: 900 mm Bed length incl. headstock: 22,400 mm Spindle diameter at front bearing: 700 mm Tailstock quill diameter: 620 mm Faceplate speed range: 0.15 – 40 rpm Balancing device Electrical balancing via generator brake system and compensation weights in the headstock. Maximum balancing values per speed range: I: 7,500 kgm II: 2,850 kgm III: 1,250 kgm IV: 480 kgm The unit can be deactivated during standard turning operations. Crankpin machining group This unit is mounted on the support and enables: Minimum distance between spindle axis and centre of rotary ring: 700 mm Maximum offset for crankpin machining: 1,000 mm Steady rest Workpiece diameter: 500 – 1,000 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm turning lenght: 4.200 mm turning diameter over slide: 800 mm Njdjy E Nz Uepfx Aaaecr faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm Nodpfxoy E Nzuj Aaajcr turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm Ncjdpfxoy E Nzns Aaasr internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: limited functionality, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Ncedpfx Aaoy E Ny Djasr Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: good (used), Year of construction: 1972, functionality: fully functional, Swing diameter over bed: 1,650 mm Nsdpfoy E Nwcjx Aaajcr Swing diameter over cross slide: 1,350 mm Turning length: 10,000 mm Bed width: 1,120 mm Spindle speed range: 1.4 - 280 rpm Max. torque, approx.: 20,000 Nm Workpiece weight between centers, max.: 10,000 kg With 1 steady rest / follow rest: 12,500 kg Equipment 3-axis digital readout: ACU RITE 1 steady rest 1 roller support Chip conveyor KABELSCHLEPP Chuck guard

Condition: used, Dividing Head Center Height: 100 mm Ncedpjy E T Dgjfx Aaasr Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: excellent (used), Year of construction: 2000, turning diameter over bed 20 mm turning diameter over slide rest 1200 mm turning length 3.000 mm centre distance 3000 mm Ncodpfx Aasy Ezy Aeajr digital readout 4 - Achsen bed width 800 mm spindle bore 122 mm turning speed range 1,80 - 355 U/min power requirement 22 kW taper in tailstock-quill 100 (1:20) dia. of quill 150 mm quill stroke 350 mm voltage 400 V total power requirement 31 kW spindle nose Gr. 11, DIN 55027 weight of the machine ca. 10 t dimensions of the machine ca. 8,20 x 2,20 x 2,20 m - Serial No.: 75.217 - Rapid feed for carriage - 4-Axis DRO-System SINO

Condition: used, Year of construction: 1976, turning diameter over bed 455 mm turning diameter over slide rest 285 mm turning length 1.000 mm center height over bed 225 mm centre distance 1.000 mm Ncsdpfoy Ezyvjx Aaajr digital readout 2-Achsen ANILAM bed width 330 mm spindle taper KK 6 DIN 55027 spindle bore 45 mm turning speed range 16 - 1.000 U/min power requirement 3,0 / 4,2 kW taper in tailstock-quill MK 4 dia. of quill 62 mm quill stroke 145 mm voltage 400 V total power requirement 4,5 kW weight of the machine ca. 1,95 t dimensions of the machine ca. 2,45 x 1,10 x 1,80 m - Serial-No.: 29-2561 - ANILAM 2-axis digital readout - 4-jaw tool holder - coolant equipment ATTENTION!!! Machine is sold without a chuck. Upon request and for an additional charge, the following 3-jaw spiral chucks can be included: - CENTER Ø 200 mm = 780.00 EUR - CENTER Ø 250 mm = 1,030.00 EUR

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes Njdpfx Asvylileaascr

Condition: used, Year of construction: 1991, Technical details: Nedpex D Ufmjfx Aaascr turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 2000 mm feed per revolution: 0,06 - / 0,03 - 28 mm spindle turning speed range: 11,2 - 2240 U/min spindle bore: 62 mm spindle head: 8 nach DIN 55022 total power requirement: 15 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 4,5 x 1,5 x 1,4 m with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws *

Condition: used, Year of construction: 2001, turning diameter 550 mm turning length 900 mm control Fanuc O-TC weight of the machine ca. 8165 kg Nedpfx Aaex Sr Eisascr

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 380mm, maximum machining length 510mm, bar capacity 80mm, spindle speed 4,000rpm, Ncedpoyt H Rujfx Aaaer 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Njdpfx Aeyz Stlsaascr Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, functionality: fully functional, Machine new white-color in 2014 (order by SIEMENS Energy) Technical Data Working area Max. swing over bed: 570 mm Max. swing over cross slide: 365 mm Max. turning length: 1500 mm Centre height over flat bed: 280 mm Max. workpiece weight: 400 / 1000 kg Max. workpiece clamping length: 1300 mm Work spindle Spindle head DIN 55027, size 8, internal taper 70 Spindle bore: Ø 62 mm Spindle diameter in front bearing: 100 mm Spindle through-hole (depth): 200 mm Max. chuck size: Ø 315 mm Speed range: 3–2500 rpm Max. faceplate diameter: Ø 560 mm Max. faceplate speed: 700 rpm Max. torque: 1800 Nm Ncodpfx Aox Ahx Doaaer Carriage – travel Longitudinal travel (Z-axis): 1160 mm Cross travel (X-axis): 345 mm Tooling system: Parat-3 Tool cross-section DIN 770 (h × b): 32 × 25 mm Tailstock Tailstock movement by hand Quill taper: MK5 (MT5) Quill diameter: 80 mm Quill stroke: 190 mm Accessories / special equipment CNC control: SINUMERIK 810 D 32-bit processor, digital control ManualTurn with cycle support 10.4" colour LCD display Operating manual 094.0003.1330-00 3-jaw chuck Ø 315 mm Faceplate Ø 350 mm (up to Ø 560 for thin workpieces) Radius turning function Turret on support: size 3, Parat 4-station, manually indexable 4 × 90° Chip conveyor Bürener Maschinenfabrik Particularly suitable for: see production spectrum

Condition: used, Machines for Export from Liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 58052 = Eccentric Press MÜLLER GEFREES = Weight approx. 4,700 kg = Special price EUR 2,400 Stock No. 59408 = Eccentric Press Weingarten = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58984 = Eccentric Press Müller Gefrees = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58309 = Eccentric Press MÜLLER GEFREES = Weight approx. 1,000 kg = Special price EUR 1,000 Stock No. 60975 = Eccentric Press 16 tons (Year 2017) = Weight approx. 800 kg = Special price EUR 1,000 Stock No. 62267 (1) = Eccentric Press Weingarten 75 tons (Machine 1) = Weight approx. 4,800 kg Njdey Erzdopfx Aaajcr Stock No. 62267 (2) = Eccentric Press Weingarten 75 tons (Machine 2) = Weight approx. 4,800 kg Stock No. 54183 = Hydraulic Press MÜLLER 10 tons, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic power unit standing alongside = Weight approx. 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = Column Drilling Machine WEBO MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = Radial Drilling Machine WEBO Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines for immediate export available. For example: 10 units welding equipment CLOOS, ESS, etc. 2x CNC lathe HITACHI SEIKI

Condition: excellent (used), Conventional lathe Inv. no. 3506 Ayel-Tech Model BT 400 * Turning length: 1000 mm * Swing diameter: 400 mm * Spindle bore: 52 mm!!! * Spindle speed: 70 - 2000 rpm * 3-axis digital readout SINO * Foot brake * Coolant system * Machine lamp * Safety cover * Fixed steady rest * Follow rest * 3-jaw chuck * 4-jaw chuck Ncodpfjxp Idgox Aaasr * Emergency stop * Change gears * Chip guard/rear panel * Documentation * 400V

Condition: used, Year of construction: 2003, Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Ncjdpfxox T Df Ds Aaaer Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2006, bar material dia. 20 mm spindle passage 22 mm turning length 205 mm Control Siemens Yaskawa bar material dia. 20 mm turning speeds 500-10.000 U/min c-axis 0,001 ° gripping station 20 mm turning length 30 mm positive location each 0,001 ° Nedpfx Aasy E Twmsaocr Number of tools 10 fest / fix St. total power requirement 2,2/3,7 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,6 x 1,2 x 1,8 +FMB m CNC-swiss type machine Star SR20-R, built 2002 with FMB Minimag 18, in good condition, comes from medical factory.

Condition: good (used), Year of construction: 2000, Spindle module replaced in 2008 Swing diameter over bed: 630 mm Swing diameter over support: 370 mm Ncjdpfx Aaey A I I Ijaer Spindle bore: 105 mm The machine is supplied with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm. Spindle speed range 2: 430 - 2500 rpm. Main motor power: 18.5 kW S6-40%

Condition: ready for operation (used), Year of construction: 1988, spindle bore: 52 mm, turning diameter: 550 mm, center width: 1,100 mm, overall weight: 1,800 kg, capacity 1100x550 mm 2-axis DRO gap bed 750 mm spindle bore 52 mm Multifix turret set of Multifix tool holders external electrical cabinet Ncodpfey Dq Akox Aaajr

Condition: new, turning diameter: 360 mm, center width: 1,000 mm, – Centre distance 1000 mm – Swing over bed 360 mm – Swing over cross slide 215 mm – Swing in gap 540 mm – 45–1800 rpm – 2-speed motor – Spindle bore 51 mm – Longitudinal and cross feed – Digital position display (Sino) on three axes – Brake – Coolant system Nedey Ev Tkspfx Aaaecr – Lighting – Safety cover – Fixed steady rest – Travelling steady rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V