Used Piston Kompresor for sale (1,891)

Condition: ready for operation (used), Piston filler from Leonhardt. Gedjl Raixopfx Admoil The machine is in very good condition. Many possibilities. Tell me which product you want to fill and seal and we will make you a suitable offer or refer you to a partner if we do not currently have the right equipment for you in stock. Mfg Gregor Guminski

Condition: ready for operation (used), Piston stuffer TALSA Gjdpfjhz Tvcex Admeil Type: H26A Capacity: 26L Power supply: 380V Power: 1.1 kW Constructed of stainless steel Set of 3 funnels Stock status: 1 piece Condition: Used, ready to work We have a lot of other devices for restaurants and meat processing, as well as cooling devices: chillers, compressors, coolers, condensers, chillers, cooling chambers, refrigeration and gastronomic furniture. See our other auctions or call us, not everything is machineseeker.

Condition: new, Hydraulic Piston Filler Manufacturer: Talsa Model: F25s Robust stainless steel construction Lid and piston in solid s/s sheet of great thickness and resistance Easily removable piston Automatic piston decompression Easily accessible speed control Gedpfeuphcvex Admjil Independent hydraulic oil reservoir Volume: 25 liters Capacity: 20kg Electric power: 1.1kW Dimensions: 53x57x124cm

Condition: used, High-pressure piston compressor Manufacturer: ATELIER FRANÇOIS Godjw Tmfxepfx Admsil Model: CE 2B Year of manufacture: 1993 Nominal capacity: 390 m3/h Current capacity: approx. 300 m3/h Pressure: 40 bar Technical condition: used, requires technical inspection, control cabinet missing

Condition: ready for operation (used), functionality: fully functional, torque: 19,000 Nm, Hydrobase Engine Construction size 3... 20 Displacement 160... 3000 cm³ Maximum pressure up to 470 bar Drive output up to 19,000 Nm Gjdpfxev D If Rj Admsil There are minor patches of rust; however, it is unused and ready for use.

Condition: new, functionality: fully functional, overall weight: 25 kg, Danfoss 83024044 PUMP-VAR-DISPL HYDRAULIC PISTON PUMP Weight: 24.6 kg Availability: 1 P.max. - 350 bar REF/Serial Number: 026-67039-0 Part number: C5V08-311B1 Godov D Hk Eopfx Admoil Manufacturing site/service centre: 41564 KAARST Germany PTS ID/Tracking ID: VKU82E77 Unique Identifier

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: R902274239, overall weight: 50 kg, operating pressure: 450 bar, power: 156 kW (212.10 HP), rotational speed (max.): 4,100 rpm, empty load weight: 50 kg, pump capacity: 234 l/min, pressure: 400 bar, Keep this to 3500 characters " Rexroth D-89275 Elchingen CNR: 100078201 TYPE: AA4VG71EP4D1/32R-NSF 52F01/DP-S AA4VG71EP4D1/32R-NSF 52F01/DP-S MNR: R902274239 SN: 93998717 FD: 22W51 n=2000min Made in Germany 156KW Bulk Offer: 4 pieces for €20,000 (€5,000 per piece) Gsdsv Dvduopfx Admoil The Bosch Rexroth AA4VG71EP4D1/32R-NSF52F011DP-S is a high-pressure axial piston pump designed for closed-circuit applications. This particular model features an integrated booster pump that serves two purposes: the supply of booster and control oil, ensuring smooth and reliable performance. The swashplate design allows for a smooth change in flow direction as it moves through the neutral position, which is essential for precise control in various applications. This pump is equipped with high-pressure valves with a booster function, which improves its safety and efficiency. In addition, it has an adjustable pressure cut-off as standard, which offers customization to specific system requirements. The inclusion of a booster pressure relief valve further increases its operational safety. Bosch Rexroth has designed this model to be versatile, and it has a through-flow function that allows additional pumps to be installed even in the same nominal size. This expands its applicability to various hydraulic systems without additional space. The AA4VG71EP4D1/32R-NSF 52F01/DP-S pump is tailored for the US market with its SAE version and complies with strict standards for high-performance hydraulic systems. Its features include handling a nominal pressure of up to a bar and maintaining a maximum pressure of up to a bar, making it suitable for heavy-duty use. The robust design and advanced control options of this axial piston pump make it ideal for a variety of demanding applications where efficient power transmission and precise hydraulic fluid control are required. This Bosch Rexroth pump stands out as a reliable component of advanced hydraulic systems with its high-quality design and ability to operate under high-pressure conditions.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: R902198125, power: 94 kW (127.80 HP), Brand: Bosch Rexroth Model: A4VG125DA2DA/32R-NTF02F071DP Type: Axial Piston Pump Power Output: 94 kW Speed (n): 2300 min Serial Number (SN): 93991682 Manufacturing Code (MNR): R902198125 Factory Date (FD): 23W03 (Manufactured in Week 03 of 2023) Condition: New, In Stock (5 Units Available) Made In: Germany Features: High Efficiency: Ideal for high-demand hydraulic systems Gsdpfxev D D H Rj Admsil Reliable Performance: Precision engineered by Bosch Rexroth Durable Construction: Suitable for heavy-duty industrial and mobile applications Factory Fresh: Manufactured in 2023, ensuring top-tier quality and longevity

Condition: used, Various pistons / cylinders available. Godjwx Etyepfx Admjil Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), Marine diesel piston, diesel engine piston -Piston: Ø 199 mm -Piston height: 265 mm -Piston pin: Ø 75 mm -Distance from center of piston pin to top of piston: 155 mm Godpfxsb A H Ags Admsil -Quantity: 2 pieces available -Price: per piece -Weight: 9.025 kg

Condition: excellent (used), Sound level meter in wooden case Gedof Etutjpfx Admjil Make Brüel & Kjaer Type 4220 Weight 1,2 kg

Year of construction: 2021, condition: new, machine/vehicle number: MA0134_MAXXI5,5, Demonstration machine: new piston compressor available immediately (Plug and Play): AIRKO MAXXI 5.5 D - 270 - 10 bar with lying 270 liter compressed air tank The compressor has 1 operating hour and is available immediately. 2 cylinders Pressure: 10 bar Rated power: 5.5 kW Delivery quantity at 7 bar: 605 l / min Sound level: 80 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 170 x 56 x 134 cm Weight: 181 kg Giodpfx Aohu R Akedmel Convenient leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: used, functionality: fully functional, Perfectly synchronized monoblock group of Volumetric Piston Dispenser - Seamer for cans up to 108 mm diameter. High dosing accuracy. * The production may vary depending on the format and product to be sealed. Can height max/min: 178/38 mm. INCORPORATES: -Can sealing with stopped can. - Stirring heads. - Normal lid / easy open lid. Gjdpfx Aewn Dl Hodmjil - Rotary disc inlet. Vacuum group of 21 pistons FMC brand.

Condition: excellent (used), Pistons 4 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Complete price: 4 pieces Gjdpfx Adjb A S Dzemjil -Weight: 1.4 kg/piece

Condition: excellent (used), Pistons 2 pieces Ø 106.5 mm Diesel engine -Piston: Ø 106.5 mm -Piston height: 112 mm -Piston pin: Ø 41.278 mm -Total price: 2 pieces -Weight: 1.4 kg/piece Giodpfx Ajb A S D Aedmjl

Condition: like new (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, total height: 2,120 mm, installation height: 2,120 mm, total width: 1,000 mm, throat depth: 695 mm, operating speed: 12 mm/s, overall weight: 1,200 kg, reverse speed: 9 mm/s, pressure: 12 bar, Hydraulic press Profi Press automatic 60 Tonnes single phase hardly used Technical specifications Pressure force [kN]: 600 Maximum pressure [bar]: 259 Piston stroke [mm]: 380 Oil capacity [dm³]: 38 Working speed [mm/sec]: 2,87 Approaching speed [mm/sec]: 9,5 Return speed [mm/sec]: 12 Motor power [kW]: 2.2 Voltage [V]: 400/3 Frequency [Hz]: 50/60 Working width [mm]: 750 Weight [kg]: 540 Diameters Inside diameter of cylinder [mm]: 170 Diameter of piston rod [mm]: 75 Diameter of piston head [mm]: 100 COLLECTION ONLY FROM MANCHESTER Payment on collection No Vat . Gsdpfsx Dzfasx Admsil Features of this workshop press (60 ton M/H-2) Integrated pressure manometer Pressure regulation Hydraulic unit with a 2-speeds handle In height adjustable working table Joystick for the control of the piston Hand pump for precision pressing Optional accessories Movable cylinder Foot pedal, two-hands operation or hand remote controller V-block set for extra support Mandrel set / Pressure pins Digital stroke read-out Table plate / pressing table Protection screens (customisable) Dimensions in mm A: 2120 B: 1000 C: 695 D: 750 E: 260 F: 1315 G: 150 H: 197 I: 750 J: 805 K: 200 NO VAT ! , no vat added.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced Giodpfsx Dnb Ujx Admjl • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 Godpfxjx R D Efj Admoil H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 2015, Manufacturer: Embatherm Model : DTE 180 Year : 2015 Type: Pot filling machine / aluminum thermo sealing machine Application: Liquid/semi-liquid product (cream)   Distribution: conveyor + transport wheel Filling: piston block with hopper Maximum capacity: 250 ml Pot detection to confirm filling Product rotation during filling: yes Lid presence sensor Detection/Ejection of non-compliant parts Lid loader Pick and place of the lid using suction + heat sealing by conduction Omron PLC + HMI   Multiple formats available Height adjustment for pot holder / filling nozzle / heat sealing: manual Machine length: 355 cm   Complete technical file Video in operation available       Gedsx R Dzyspfx Admoil  

Condition: used, Year of construction: 1977, Manufacturer: BOSCH – STRUNCK Model : FKL A 06 Year: 1977 Type: Automatic filler Plunging filling heads Filling pumps per set: 6 units Giodsx R Diwepfx Admol 1 group of pumps up to 100 ml 1 group of pumps up to 200 ml Piston stroke adjustment: mechanical Motor power: 0.37 kW Laminar flow Filling head storage system withclosed circuit for cleaning. Machine dimensions: 100 x 80 x 245 cm Video in running condition available

Condition: used, Year of construction: 2015, Multi-purpose filling line (aluminium and plastic) > Video available on request. Manufacturer : Marchesini Tonazzi Year : 2015 Model : Millenium 200 Type : Automatic Filler – Capper Filling head : 2 units Control panel Dosing and height settings: digital (50 memories) Tube orientation: electronic 40 + 2 tube holder cups Dosage: 3 to 350 ml Ø aluminium tubes: 11 – 40 mm Ø plastic / laminated tubes: 11 – 50 mm Total tube height: 50 – 250 mm System: no tubes / no filling Volumetric dosing unit with two pistons and two cylinders 3-way rotary valves Plunging heads Single-shell hopper Automatic tube ejection PETG casings Cleaning unit: device for cleaning empty tubes using compressed air and dust extraction Inkjet printing on tubes: 1 head Closed-circuit water cooling unit Tube closure, change in 5 min: – Hot air sealing system for plastic tubes – Dual aluminium tube sealing system (single or double fold) Controls : – Hopper product level: electronic – Presence of cap – Print presence check – Tube ejection with wrong code > > Stainless steel lift truck. Hydraulic pump lift Model : Roboplacer TU-751 Giedpfxjx R Dhae Admol Type : Robotic tube feeder Three-axis orthogonal robot Mini box size 400 x 400 mm Maximum dimension boxes 600 x 400 mm Manufacturer : Marchesini Year : 2015 Model : MA 250 Type : continuous cartoner Version L for long cartons Incorrect carton ejection Extended motorised carton supply system Numbering unit with embossing and polypenco roller Two-channel in-line tube carousel Format range : Width A: 25 – 100 mm, pitch 127 mm Height B: 15 – 85 mm Length C: 60 – 150 mm Full documentation available Formats available with the machine : – Tubes: Ø 40 x 200 mm – Cases: 55 x 40 x 220 mm, aeropla – Speed : 150 / min Application : Food industry

Condition: used, Year of construction: 2003, Year: 2003 Type: hot or cold product filling line for pots and bottles Application : Suitable for viscous products such as creams in the cosmetics / pharmaceutical or other industries   Type : Automatic linear filler Manufacturer: Tirelli Model : CHICO 2P Year: 2003 Number of heads : 4 units Volumetric filling technology with 2 metering pistons Jacketed 25 L hopper + piping Temperature controller Pneumatic bottle-lock centring device PLC controls and configuration Linear conveyor with pallet chain SISE 95E6E 13 DC60 temperature controller (3.5 KW / 90°C / Water) – Year 2014 Gijdpfxjx R Ddbe Admel   Type : Automatic capping machine with star wheel Type of cap: screw cap Manufacturer: Tirelli Model : RO Year: 2003 Automatic cap feeder : vibrating bowl + giraffe conveyor Presence / jamming / dispensing sensors Pick and place   Type: Automatic jar / bottle unscrambler Manufacturer: Romaco Bosspack Model : MS150 Year: 2003 Output : up to 150 jars / min Product dimension : Diameter: 30 mm min / 100 mm max Height : 50 mm min / 200 mm max Width : 30 mm min / 100 mm max Length : 30 mm min / 100 mm max Machine dimensions : Length : 150 cm Depth : 340 cm Height : 140 cm   Video in running condition :

Year of construction: 1998, condition: used, Manufacturer : APV Gaulin Model: MC 120 4 TBS Year : 1998 Giodpex R A Hbjfx Admsl Type : Piston homogenizer Number of homogenizing effects: 2 Theoretical flow rate: 12000 L/h Pressure: 275 bar Piston Ø: 60.3 Valves : TBS (Ball)    

Condition: used, Manufacturer : SPX APV Model: Rannie – R275 Q-70 5140 X Gsdpfx Asx R A E Rodmsil Type : Piston homogenizer Pwer : 250 KW Max pressure : 300 Bars Max. capacity: 27,000 L/H Stainless steel casing with pre-insonization. Number of pistons: 5 Homogenizing stage / effect: 2 Floor support available, not visible on photos. Second identical unit available: Reference osertech # 12048

Condition: used, Year of construction: 2004, Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Gedpfx Adox R Auxomoil Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars