Used Profimaster Compressor for sale (3,290)

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Hodpfx Aszf Ivuobkjnu Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Hnedpfxjy Iplfj Abkeu Very little use Ex Pharma Facility

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Hnjdpfx Ajzz Hilsbkeu Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, This FINI BSC 20 is a high performance screw compressor that delivers up to 10bar of max pressure with a 15KW electric motor. Hedpfx Abszlufpokenu This compressor was purchased new and was serviced on a yearly basis by the locally trained Fini agents. It comes complete with an MTA air dryer unit.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, Container includes the following contents: - 10ft storage container, new / Color: Anthracite grey - SSC-Strong 37 Vario Hjdpfexc T Evjx Abkonu • Speed-controlled screw compressor • Free air delivery at 8 bar: 6.3 m³/min • Dimensions (LxWxH): 1432 x 1000 x 1480 mm • Weight: 705 kg - 2 compressed air tanks, 500 l each o With AD2000 certification o Horizontal design - 2 Ecomat 31 condensate drains - 2 sets of fittings - SCC refrigerant dryer DRA480 o ISO 8573-1 Class 4 o Refrigerant: R407C o Capacity: 480 m³ - Pre-filter FIL934-P - Fine filter FIL934-M The compressor has seen very little use and therefore has low operating hours. Upon request, we can read the operating hours and run the compressor for demonstration.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Good working condition Hsdpfxoyb Sdij Abkonu

Condition: excellent (used), Year of construction: 2004, Fini Cube 10- This is a compact 10HP industrial screw compressor. It can deliver max pressure of 10 bar with a 7.5KW electric motor. I was purchased in 2004 and was serviced on a yearly basis by the fully trained technicians of the local Fini agents. This compressor was used as a back up compressor to our Fini BSC 20 compressor so it was only used periodically to ensure it functionality when required. Hnsdpfx Aezluihsbksu It come complete with an MTA air dryer.

Condition: excellent (used), Offer consisting of: complete compressed air system comprising SCC Flexi 55kW screw compressor, air-cooled, SCC DRA 480 refrigerant dryer, only about 2000 load hours, compressed air tank 1000 litres (OKS brand), year of manufacture: 2021 Hjdpfx Abjyl S Eboksnu

Condition: used, Year of construction: 1988, This Flottmann mobile construction compressor, model: Flottair 639, will be auctioned online as part of our industrial auction / machinery auction due to the business closure of Sammet Wohn- und Gewerbebau GmbH – including construction machinery, containers, building materials, and much more. You can find this and many other items on our platform. Hnsdsz Sx Igepfx Abkou

Condition: used, We offer pallets of approximately 5,000 kg open-type compressors, featuring a mix of Bitzer, DWM, and Bock units. This lot has been assembled for trade, export, and stock building purposes and is sold as a single complete batch. The entire package is available for one fixed package price. No individual sales are offered. Hnjdpeycvkvofx Abkju If you have any questions or require additional availability, please contact us.

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm Hsdsyb Rquspfx Abksnu

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Hnodoz Iz Itepfx Abkju 45 kW 8.50 bar 8.37 m3/min Year of manufacture: 2018 Operating hours: 34,881 Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW Hedpfx Abezznqkekenu 8.10 bar 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Hnjdpfx Aszww H Tsbkou

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial Number: AIF 042705 = Compressor 1 Serial Number: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Hnjdpfxoz Rntij Abkju Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Max. air pressure in bar: 10 Both compressors have been maintained by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. The motor was also replaced on both compressors. The units are in good condition. Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt).

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2028752, overall weight: 155 kg, power: 4 kW (5.44 HP), pressure (max.): 10 bar, noise level: 79 dB, Equipment: refrigerant dryer, type plate available, Due to company closure, for sale! SPECIAL PRICE! Aircraft 2-piston compressor, 400V, 9.6A, including refrigerant dryer. Fully functional. Hnsdpfxjz Rt Tus Abkju Self-collection only.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 45,275 h, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 125 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, Equipment: documentation/manual, type plate available, For sale is a used Kaeser SK 26 screw compressor from our company’s inventory. Manufacturer: Kaeser Type: SK 26 Year of manufacture: 2001 Operating hours: approx. 46,275 h Load hours: approx. 23,142 h Available from: December 2026 The compressor is currently in use at our facility and will be available from December 2026. Hnedsz R I Smspfx Abksu The unit has been used and maintained regularly and is in used condition, commensurate with its age. The compressor is currently ready for operation. On-site inspection is possible after prior arrangement.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Hedsz Sqa Uepfx Abkenu Condition of the machine: Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Electrical Connection: 400 V, 50 Hz, 3 Phases Country of Origin: Belgium

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Hsdpfx Ajz Rmvcsbksnu Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Hedpoz Rq Eujfx Abkjnu Location: available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 oil-free scroll compressor The SF series utilizes scroll technology, which eliminates metallic contact between the compression elements, meaning that absolutely no oil is required in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compressor elements have recently been overhauled or replaced. Operating hours (total): 15,983 hours (the actual time the compressor has been running since 2001). Controller hours: 99,527 hours (the time the controller was energized). Operating times of the individual scroll elements (compressor stages): Operating hours, element 1: 735 hours Operating hours, element 2: 735 hours Hnodpfxozwmd Us Abksu Operating hours, element 3: 736 hours Technical data: Manufacturer: Atlas Copco Model / Product type: SF 15 (Oil Free Air) Serial number: ATI 502157 Maximum operating pressure: 8 bar(e) Delivery rate (Free Air Delivery): 24.7 l/s Shaft rated power: 14.8 kW Shaft rated speed: 1500 rpm Total weight: 590 kg Year of construction: 2001 Controller: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Height: 1.66 meters "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled Hnedpfx Abjzt Srijkeu * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering a used screw compressor for sale. KAESER screw compressor - SK22 Serial No.: 1558 Year of manufacture: 2016 Rated power: 11.0 kW Motor speed: 2,960 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3 - 45°C Integrated or separate dryer Oil separator Control panel All available attachments Operating hours under load: Unit 1: approx. 2,500 hours Unit 2: approx. 1,000 hours Compressed air tank: 2,000 liters Tank design: hot-dip galvanized Price: €14,500.00 net €17,255.00 gross This is a used item. DESIGN Hnjdez Iy Niopfx Abksu Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will be happy to assist you with the transport and installation of the equipment. TERMS OF PAYMENT Terms of payment will be agreed upon in the event of an order. The price is quoted as a unit price/net price, or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveying technology, storage platforms, textile storage, and machines for retail, industry, and trades. We continuously offer interesting used items from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 2018 With adjustable 3m arm For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideal for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking facilities. The system is in good condition. The filter was replaced on 10/06/2025, making the unit immediately ready for use. Technical data: Airflow rate: 1,100 m³/h Power supply: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Maximum vacuum: 2,250 Pa Protection class: IP42 Control: 24 V Weight: 95 kg Continuous duty cycle: 100% IFA-certified design Features: 3m arm length Mobile design Filter monitoring Hodozg T A Ajpfx Abksnu Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter replaced on 10/06/2025 Safety inspection valid until 2026 (according to inspection sticker) All information is provided without warranty.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Hnodpfx Aovmivcsbksu Machine is being sold cheaply because it needs to be repaired. Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -