Used Phrase Bench for sale (2,461)

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Ihjdpfxsu N E Evj Ag Ust Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required Isdpjtw S Awjfx Ag Usht The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 700 mm turning speeds 115 - 1620 U/min centre height 125 mm spindle bore 27 mm tailstock quill taper MT 2 tailstock quill stroke 40 mm metric threading 0,2 - 3,5 mm thread - inch 8 - 56 inch. thread - module 0,2 - 12,5 mm swival range +/- Oberschlitten 45 ° connected load frequency 400 V total power requirement 0,75 kW weight of the machine ca. 0,15 t dimensions of the machine ca. 1,41 x 0,61 x 0,41 m Equipped with - 27 mm spindle clearance - adjustable guideways Ihodpfxof Nb Hks Ag Ust - Powerful motor with 0.75 kW - High resolution of the axis spindles for exact positioning - Danger!! without digital display Scope of delivery: 3-jaw chuck 100 mm, change gear set, splash guard. On request also with 230 volt connection

Condition: good (used), Grinding wheel diameter: max. 300 mm Rotational speed: 1,500 rpm Drive power: 1.5 kW Isdsw Emahopfx Ag Uoht Machine dimensions (L x W x H): 750 x 420 x 1100 mm Weight: approx. 130 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Iedpfxsrif T Dj Ag Uoht Machine characteristics SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW Ihedpfoxaa Thex Ag Ust weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: used, Year of construction: 2005, operating hours: 22,245 h, functionality: fully functional, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ENZ-6CAL, Air cooled, temperature only, -70C to +150C, 8C per minute cooling, Ihsdpfewy Uqwjx Ag Uet Internal dimensions (W,D,H) 600mm, 743mm, 850mm. Comes with calibration.

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible Ihsdpfowk Nxqex Ag Ujt - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Year of construction: 1985, condition: good (used), Bench drill TB 15 spindle speed 360 - 3600 rpm Ihodpfx Agjk D Hrdj Ust via V-belt pulley spindle mounting MK 2 with intermediate table Strohm 400 Volt

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle diameter: 130 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 3,000 rpm, table length: 2,500 mm, table width: 2,000 mm, feed length W-axis: 800 mm, Year of manufacture: 2013. Heidenhain 530 control, 6 axes Axis travel: X: 6000 mm Y: 2500 mm Z: 2500 mm W: 800 mm Number of controlled axes: 6 Max. table load: 20,000 kg Table dimensions: 2000 × 2500 mm Iodpfx Agex Evhhj Uoht Spindle taper: ISO 50 Spindle diameter: 130 mm Speed range: 5–3000 rpm Max. spindle power: 37 kW Tool magazine: 60 tools

Condition: new, Year of construction: 2025, The CORMAK WS32 table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32 bench drill: High spindle stiffness Threading by automatic switching of left-hand rotation Iodorif Udopfx Ag Usht Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 280, 400, 675, 1140, 1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm Optional equipment cooling system

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm Ihodpfxsxm Rzis Ag Uot -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: ready for operation (used), Grinding wheel diameter: 250 mm Grinding wheel width: 32 mm Grinding wheel bore: 51 mm Grinding wheel speed: 1450 rpm Grinding wheel drive motor: 1450 rpm Drive power: 0.73 kW Electrical connection: 380 V, approx. 1.1 kW Isdoxpv Aqopfx Ag Uoht Required space: 630 x 550 x 1100 mm Weight approx.: 75 kg

Condition: used, Bench drilling and tapping machine FLOTT type TBZ 15 GL Serial no. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle holder MK2 throat 195 mm Pinol stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 steps Motor power 0.55 + 0.75 kW Mains connection 380 Volt, 50 Hz - 6 belt speeds from the motor and 2 belt speeds to the drill spindle 2 motor speeds Iodpfx Aodzp S Njg Ujht - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack and pinion on the column - Original metal base Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg good condition

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth limiter. Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth limiter, electronic drilling speed indicator, laser pointer Iodpfx Agsvzqrze Uoht lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 20mm RPM RANGE 190-2700 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 120mm DISTANCE OF SHAFT FROM COLUMN 170mm DISTANCE OF SHANK FROM THE BASE 530mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 380mm COLUMN DIAMETER 70mm TABLE DIMENSIONS 280x280mm BASE DIMENSIONS 480x290 mm ENGINE POWER 750 W HEIGHT 1120 mm WEIGHT 66kg Manufacturer: Cormak

Condition: used, Double bench grinder METABO type 7206 D Year of manufacture: approx. 1985 Max. grinding wheel diameter: 150 mm Grinding wheel width: 20 mm Grinding wheel bore: Ø 32 mm Speed: 3000 rpm Motor power: 280 watts Power supply: 380 volts, 50 Hz Ihodjxf Uv Uepfx Ag Uet – Fitted with one 36 and one 80 grit corundum grinding wheel Required space (L x W x H): 460 x 240 x 220 mm Weight: 18 kg Good condition

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 65mm vice Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth indicator, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 16mm RPM RANGE 350-2400 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE Iedpfsrif H Eox Ag Ueht 90mm DISTANCE OF SHAFT FROM COLUMN 150mm DISTANCE OF SHANK FROM THE BASE 430mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 335mm COLUMN DIAMETER 60mm TABLE DIMENSIONS 240x240mm BASE DIMENSIONS 400x232 mm ENGINE POWER 700 W HEIGHT 910 mm WEIGHT U 46kg

Condition: used, Double Bench Grinder AEG Type DWS 200/800M No: 87 644919 Year of manufacture: approx. 1970 Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Motor power: 0.8 kW Grinding wheel speed: 3000 rpm Power supply: 380 V, 50 Hz - Motor bearings need to be replaced Isdpfx Asxrgvasg Ueht - 1 grinding wheel with 25 mm width - 1 grinding wheel with 32 mm width Required space (L x W x H): 600 x 280 x 300 mm Weight: 40 kg

Condition: new, Year of construction: 2025, The WS16 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Ijdpforif S Rsx Ag Uoht Technical data MAX. DRILLING DIAMETER IN STEEL 16mm MAX. THREADING DIAMETER IN STEEL M10 COLUMN DIAMETER 70mm SPINDLE TRAVEL 100mm SPINDLE-COLUMN DISTANCE 193mm MAX. SPINDLE-TABLE DISTANCE 330mm MAX. SPINDLE-BASE DISTANCE 613mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 480-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 265 x 285 mm BASE DIMENSIONS 360 x 480 mm MACHINE HEIGHT 1130mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 131.5 kg DIMENSIONS 600 x 400 x 1150 mm Optional equipment cooling system

Condition: used, Double grinding pedestal AEG type DWS DWS 301/1100 No: 87 154303 Year of manufacture: approx. 1970 Grinding wheel diameter: max. 300 mm Grinding wheel width: max. 40 mm Motor power: 1.1 kW Grinding wheel speed: 1500 rpm Power connection: 380 Volt, 50 Hz Ihodexrgtxjpfx Ag Uet - Fitted grinding wheels Ø 260 mm - Motor newly fitted with bearings Required space (L x W x H): 650 x 450 x 370 mm Weight: 64 kg Good condition

Condition: new, Year of construction: 2025, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Ihedpfsrif Trex Ag Uet Optional equipment cooling system

Condition: new, Year of construction: 2025, The W16 table drill is characterized by a rigid structure and great performance while maintaining small size. It has threading functions and a swivel work table with adjustable height. It is a machine that combines power and precision, which is important in various applications. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch No vice included! Iodpfxsrif Iue Ag Ujht Technical parameters Max. drilling diameter 16 mm Max. spindle quill extension 100 mm MK2 spindle cone Spindle speeds 480, 800, 1400, 2440, 4100 rpm The distance of the spindle axis from the column is 193 mm Table dimensions 200x230 mm Base dimensions 528x360 mm Max. distance of the spindle tip to the table 315 mm Max. distance of spindle tip to base 556 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° Motor power 750 W / 400V Weight 90 kg Included: B18 self-clamping drill chuck MK2 drill chuck shank

Condition: new, Year of construction: 2025, The W25 table drill is a machine that combines power and precision. It is characterized by a solid, rigid structure, high efficiency and precision. The device is equipped with a swivel work table with adjustable height and threading functions with automatic change of the direction of spindle rotation. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch Technical parameters Max. drilling diameter 25 mm Max. spindle quill extension 125 mm MK3 spindle cone Spindle speeds 290, 420, 740, 1260, 2150 rpm Distance of the spindle axis from the column 240 mm Ihsderif I Ropfx Ag Uet Column diameter 100mm Table dimensions 280x300 mm Base dimensions 590x375 mm Max. distance of the spindle tip to the table 367 mm Max. distance of spindle tip to base 630 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° The diameter of the quills is 50mm Motor power 1100W / 400V Dimensions 800 x 400 x 1100mm Weight 165 kg Included B22 self-clamping drill chuck 5-20mm MK2 drill chuck shank

Condition: new, Year of construction: 2025, The CORMAK WS32BC table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. It has 8 ROTATION SPEEDS with a speed range of: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32BC bench drill: SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation IT HAS 8 ROTATION SPEEDS ROTATION SPEED RANGE: 140, 250, 380, 500, 580, 850, 1250, 1960 rpm Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical parameters of the WS32C metal bench drill MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE 745mm SPINDLE MOUNTING MK3 Iodpfx Agjrigaqo Ueht ROTATION SPEED RANGE 140, 250, 380, 500, 580, 850, 1250, 1960 rpm NUMBER OF ROTATIONAL SPEEDS 8 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm

Condition: new, Year of construction: 2025, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Iedpfx Agsxbzuvj Ujht Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg