Used Phrase Bench for sale (2,462)

Condition: used, · Spindle diameter: 45/35mm Clamping length per side approx.: 450 mm Isdpfjlfdxmsx Ag Ujht Double sanding block Langbein with left/right mode for woodworking.

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Ihjdpfx Asxmvl Tjg Ujt Dimensions: approx. 4000 × 1800 × 1600 mm LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm Ihodpfx Agorr Amme Ujt 8 MW test bench for gears, closed loop

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Location: ex stock 54634 Bitburg Ijdpfx Agewq Ea Rs Uoht - available immediately -

Condition: used, Colombo dowel boring machine 2 vertical axes, 11 kW each 2 dowel heads, 3 kW each Weight 3500 kg 35 kW, 400V/50 Hz Ihodpex Dnl Tjfx Ag Uot Year of manufacture 2001

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2230x720x280 mm Weight 135 kg Ijdov A Hxmepfx Ag Uoht Total power requirement 0 kw

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Ihedpoumv Emsfx Ag Ujt Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: PRJ061185, throat depth: 190 mm, spindle speed (max.): 4,300 rpm, spindle speed (min.): 225 rpm, column diameter: 65 mm, drilling capacity: 18 mm, type of input current: three-phase, spindle mount: MK 2, input voltage: 400 V, spindle stroke: 80 mm, Equipment: rotational speed infinitely variable, Exhibition machine, year of manufacture 2020 – with minor signs of use. The machine was exclusively used for demonstration purposes in our showroom. Includes machine lamp – without drill chuck. Standard equipment: - Mushroom-head emergency stop button (latching) - Reversing switch with neutral position. Manually operated for clockwise and counterclockwise operation - Main switch with lockable motor protection switch - Infinitely variable speed control - Protection class IP 54 - Spindle guard with electrical interlock Ijdpfx Aex Nn Sgjg Usht - Paint finish: DD textured lacquer, signal white RAL9003, PANTONE 7545c, black Technical data: Drilling capacity in steel E335 (St 60): 18mm Thread cutting in steel E335 (St 60): M12 Thread cutting in cast iron EN-GJL-200 (GG 20): M14 Tool holder short spindle: MT2 Throat: 190mm Spindle stroke: 80mm Column diameter: 65mm Feed: Manual Drive: Infinitely variable Drive motor: 750/1,500 rpm, 0.37/0.55kW Spindle speeds: 225–4,300 rpm Operating voltage: 400V/50Hz

Condition: used, Year of construction: 2000, Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC Control: Heidenhain 426 Iedpfx Aox A Ayieg Ueht Completely overhauled in 2022 Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping surface: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic covers completely overhauled with new wipers. Dimensions (LxWxH approx.): 7,500 x 6,950 x 4,000 mm Weight: 40 t.

Condition: excellent (used), Workbench, usable from both sides. Length: 2500 mm. Depth: 1250 mm. Worktop height: 930 mm. Height with superstructure: 1560 mm. Material: multiplex, 30 mm thick. Structural timber: 16 x 6 cm. Intermediate shelves: 25 mm MDF. Weight: 250 kg. Iodpfexvtaasx Ag Ueht

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm Ijdpsuhhzhsfx Ag Uoht throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Siegfried Volz Machine Tools Ihsdpfownfarsx Ag Ust Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Ijdpfxeu Aa A Ae Ag Ujht Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2018, 1 x Bench Drill Flott TB 10 Eco Year of manufacture: 2018 Attractive machine from a small toolmaking shop, in as-new condition. Technical data: Speeds: 250 - 3000 rpm Ihodpox Nbmdjfx Ag Ust (stepless) Drilling capacity in steel: 10 mm Spindle mount: B 16 Quill stroke: 50 mm Accessories: Röhm keyless chuck 1 - 13 mm Operating manual (copy) The machine can be inspected under power.

Condition: used, Year of construction: 2013, SCHNELL Optibat 100/3/12 Cutting Bench This cutting bench features 3 tracks. Length of 12 meters. It can cut materials up to 40 mm in thickness. Manufactured in 2001, it was revised in 2013. Ihjdpfx Asvtp Uxeg Uot Number of tracks: 3 Length: 12 m Materiel Thickness: Cut up to 40 mm

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 15 mm throat 185 mm bore stroke 60 mm turning speeds 240 - 4500 U/min 290 x 225 mm total power requirement 230 kW / Volt weight of the machine ca. 130 Kg dimensions 0,7 x 0,7 x 1,8 mm Bench drill - Frequency converter - Base Iodoxz Sbgspfx Ag Usht

Condition: good (used), Year of construction: 1994, Control: Heidenhain TNC 415 Travel paths: X=2000, Y=2000, Z=1250 mm B axis: 360° Table size: 1600 x 1800 mm Max. workpiece weight: 12,000 kg Work spindle: 130 mm Taper: SK 50 Tool changer: 60 stations Hollow spindle flange Ø: 221.44 mm Max. centring cone Ø: 180 mm Spindle extension: 800 mm Speed: 400 – 1600 rpm Feed: up to 8000 mm/min Table rotation B axis: 1.5 rpm Weight: approx. 32,000 kg Operator platform, electrically height-adjustable approx. 1200 mm, Chip conveyor Ijdpfxjxvb Ixs Ag Usht

Condition: excellent (used), Year of construction: 2000, operating hours: 59,458 h, functionality: fully functional, machine/vehicle number: 1926, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table width: 1,800 mm, table length: 2,200 mm, table load: 15,000 kg, overall weight: 48,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 2,500 rpm, power: 48 kW (65.26 HP), quill diameter: 130 mm, quill travel distance: 630 mm, Equipment: cabin, rotational speed infinitely variable, Technical Specifications X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm Table size: 1,800 × 2,200 mm Table load capacity: 15,000 kg Spindle speed (max): 2,500 rpm Spindle diameter: 130 mm Control: HEIDENHAIN TNC 426 Number of axes: 5 Automatic tool changer: 60 positions Tool holder: ISO 50 Isdpfx Agoxyu Dzs Ujht Operating Hours Machine on-time: 59,458 h Spindle running hours: 23,258 h Equipment & Features Operator's cabin Complete machine documentation included

Condition: excellent (used), Zwick Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm Ijdpfx Agsfnm Dqe Usht (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Spindle diameter: 75 mm Machine weight approx. 6500 kg Iodpfx Agextu D Uj Ueht Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Straight-Cut Cutting Bench 40, manufactured by MEP Number of bars: - n.1 Ø 40 - n.2 Ø 32 - n.3 Ø 26 - n.4 Ø 20 - n.5 Ø 16 22 Fy= 600 N/mm - ft= 650 N/mm Minimum cutting length: 800 mm Maximum length: 12.000 mm Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5 Minimum cutting length: 800 mm Maximum length: 12.000 mm Iedjvtx Eyspfx Ag Uoht Measurement tolerance: +/- 1 mm/m Max. speed positioning: 2m/s Measurement evacuation speed: 2,2 m/s Number of compartments: 5 + 5

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm Ihedpfx Agju Id D Us Ust *

Condition: excellent (used), EDAG EDAG Huf endurance test bench Purpose: This test bench is intended exclusively for testing parts that are capable of rotational and/or translational movement as part of an endurance test and within the limits of the following technical data. Technical data: Dimensions: width 1565 mm x depth 615 mm x height 1655 mm Ijdpfevx S Apox Ag Usht Weight approx. 450 kg Operating voltage 400V /50Hz Control voltage 5, 24 Provisional fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum moment 5 Nm Break-out force (manually operated slide) 15 N Displacement force (manually operated slide) 10 N Other equipment Ρ4, 24" TFT monitor (1900 X 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards 1 card, NI PCI-6251,1 card, N1 PCI-7044 Drawer 500 mm (fully extended with automatic closing) Additional load 500 N Drawer cabinet, lockable 3 drawers The teach-in endurance test bench is a device for carrying out endurance tests On test objects that can rotate and/or move translationally, e.g. cylinders Locks, door handles, key functions. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz power: 5,5kW rated current: 8A Back-up fuse: 16A Ihjdjlx A T Djpfx Ag Uet Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Ihedpeiu H Hcjfx Ag Uet Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Further questions we can answer on the phone for you.