Used Pfauter Pe 150 for sale (52)

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Bcjdpfowkih Esx Aa Ujw

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Machine still under power and production can be seen at any time. Technical Data – PE 150 This hobbing machine with automatic workpiece change system is designed for series production of workpieces, for which the corresponding drawings have been received. Our specialists for automatic workpiece changing systems will gladly assist you if you wish to convert the machine for milling different workpieces. Hob Cutter: Max. permitted cutter outside diameter: 130 mm Max. length (depending on cutter arbor diameter): 220 mm Slide Travel: Radial (X-axis): 150 mm Tangential (Y-axis): 170 mm Axial (Z-axis): 200 mm Max. Swivel Angle of Milling Head: In +A direction: 30° In -A direction: 45° Workpiece Table: Outer diameter: 160 mm Bore diameter: 63 mm Overall Dimensions of the Machine: Length: 5,820 mm Width: 4,047 mm Height: 2,810 mm Approximate Weight of Machine: 8,000 kg Speeds: Feeds: Axes X, Y, and Z: 1 to 3,000 mm/min Rapid Traverses: Axes X, Y, and Z: 3,000 mm/min Spindle Speeds: Tool (S-spindle): 150 to 600 rpm Workpiece table (C-axis): 1 to 125 rpm Electrical Equipment: Operating voltage: 400 V Supply voltage: 230 V Bjdpfou N E Rrox Aa Uscw Control voltage: 24 V Frequency: 50 Hz Connected load of the machine: 48.5 kVA Cable cross-section: 25 mm² Fusing: 100 A

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 27604, feed length Y-axis: 170 mm, feed length Z-axis: 200 mm, table diameter: 160 mm, spindle speed (max.): 600 rpm, TECHNICAL DETAILS Bcsdjv Rdwispfx Aa Usw X-axis: 150 mm Y-axis: 170 mm Z-axis: 200 mm Swivel angle: -150/30° Milling unit Max. hob diameter: 130 mm Max. hob length (shaft mill): 220 mm Max. module: 3 Cutter length: max. 220 mm Cutter speeds: continuously variable up to 600 rpm Milling arbor diameter: 32 mm Table Table diameter: 160 mm Table bore diameter: 63 mm Control & Retrofit Control: SINUMERIK 840 D SIEMENS Retrofit: Sinumerik 840 D / Windows XP Pro in 2010 MACHINE DETAILS Total power requirement: approx. 20 kW Machine weight: approx. 10,500 kg Space required: approx. 6.8 x 3.7 x 2.85 m

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 27506, Complete overhaul in 2009 Bcsdpfxextpg Ro Aa Uow CNC gear hobbing machine Pfauter PE 150 Serial number: 27 506 Year of manufacture: 1991 – complete overhaul in 2009 CNC control: SINUMERIK 840 D

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 27364, Used CNC gear hobbing machine Bcedjyiylqjpfx Aa Ujw Manufacturer: PFAUTER Model: PE150 Year of manufacture: 1989/2009 Control: Siemens 840D

Condition: excellent (used), Year of construction: 1992, max. wheel diameter 130 mm gear width 400 mm max. module 3 min. module 0,5 Bedpjyb S R Ajfx Aa Uocw Control Bosch CC 220 milling spindle speeds (infinitely variable) 300 - 1200 U/min clamping length max. 1160 mm swivel angle for work spindle +/- 45 ° x-travel 230 mm y-travel 170 mm z-travel 400 mm spindle speeds 1 - 125 mm total power requirement 52 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,8 x 3,8 x 2,5 m Machine in very nice condition!

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Bjdpowc Tdusfx Aa Uocw Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: used, Year of construction: 2014, Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. Bcedpfxextbmio Aa Usw *

Condition: ready for operation (used), Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible. Bcedoxl Upzepfx Aa Uew

Condition: good (used), Year of construction: 1987, operating hours: 2,685 h, functionality: fully functional, feed length X-axis: 240 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, total length: 5,235 mm, total height: 3,045 mm, total width: 3,990 mm, spindle speed (max.): 640 rpm, spindle speed (min.): 55 rpm, overall weight: 11,000 kg, Equipment: documentation/manual, Gear cutting machine Pfauter PE 300 Model: SK07E 20100 Control: Sinumerik System 3 Fully functional machine, which was completely overhauled just a few years ago. Investments made: - Overhaul including milling head (2021) approx. €70,000 - All hydraulic hoses renewed (2021) approx. €3,500 Bjdpow Dcx Rjfx Aa Uecw - New oil mist separator (2021) approx. €5,000 Numerous tools and clamping devices available, see pictures and attachment.

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction Bcjdpfx Aaew Rf S Ss Ujw - technical Documentation

Condition: used, Year of construction: 1992, max. wheel diameter 175 mm gear width 710 mm max. module 4,5 min. module 0,5 weight 4,5 t total power requirement 10,5 kW Bcsdpfxjvzhfre Aa Uow Equipment/accessories: - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 1969, max. wheel diameter 160,175 mm gear width 355 mm max. module 4,5 spindle bore 75 mm centre distance 410 mm Bedpfx Aasvzhf Sj Uocw min. number of teeth 2, 3 cutter diameter max. 115 mm cutter length max. 105 mm axis distance between cutter and workpiece - max. 138 mm axis distance between cutter and workpiece - min. 30 mm milling head -swivable 120 ° milling spindle speeds 70 - 400 U/min axial-feeds 0,25 - 4,0 mm/U radial feeds 0,09 - 1,5 mm/U total power requirement ca. 9,5 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1730x1400x1440 mm Equipment/accessories: - Interchangeable wheels - Milling arbors - Clamping devices - Documentation

Condition: used, Year of construction: 2007, x-travel 900 mm y-travel 300 mm z-travel 1000 mm control Siemens Sinumerik 840D max. workpiece diameter 1600 mm max. module 20 mm tip circle diameter 350 mm Milling arbour diameter 375 mm Total closing value 80 kVa weight of the machine ca. 33,5 t dimensions of the machine ca. 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation Bedpfx Aew Rrb Hoa Uocw

Condition: good (used), Year of construction: 2005, functionality: unexamined, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: (1) CNC gear shaping machine Technical Details/Technical Details: English: max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. German: max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Parts gantry system and/or cranes are not included in the scope of delivery. Bcsdpfx Aaov R Tmto Uew

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 mm Bcsdpfjymqw Sox Aa Uow gear width 72 mm max. module 6 Control Siemens 840 D swing diameter 350 mm dia. of shaper cutter 125 mm x-axis 230 mm y-axis +/- 25 mm z-axis 250 mm stroke length max. 80 mm column swivelling 0 - 12 Grad no. of strokes 80 - 800 Hub/min total power requirement 44 kW weight of the machine ca. 11,5 t dimensions of the machine ca. 4,2 x 4,0 x 3,3 m Very nice condition!

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t Bcedpexz Avbsfx Aa Ujw table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 Bedpfx Aasxrwpks Uscw *

Condition: used, Year of construction: 2000, Technical details: Bcodpfx Asyk Ur Uja Usw max. wheel diameter: 180 mm gear width: * mm max. module: 4 total power requirement: 14 kW weight of the machine ca.: 8 t slide travel axial ( Z-axis ): 300 mm work piece - max.: 490-640 mm

Condition: used, Year of construction: 1976, cone distance min./max. 0/108 mm Pitch angle min/max 5°/84° Bsdpsyh Rmtjfx Aa Uocw Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm speeds: 98-286 weight of the machine ca. 6577 kg dimensions of the machine ca. 1560 x 2140 x 2200 mm Equipment/accessories: -Cutting tools -Spacer angle -Technical documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm Bsdpfoyh Rmmsx Aa Uecw pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 Bcsdowdyx Uepfx Aa Ujw min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed *

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 Bsdpfxeu Sbfdj Aa Ujcw total power requirement 0 kW weight of the machine ca. t dimensions of the machine ca. m

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Grinding Wheel Diameter: 400 mm Bedpfjx R R Exox Aa Uocw Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation The machine can be viewed while powered up.

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm --> Straight gear teeth: --> Largest workpiece diameter: 630 mm Bcedpfx Aajw A Am So Uow --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Translated with (free version)