Used Perforation Profile for sale (6,681)

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,500 kg, Double pallet fork Cedsx Radqopfx Ap Dehd ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 2A (41 cm) Capacity 2,500 kg Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,150 mm ID OS1818

Condition: used, functionality: limited functionality, load capacity: 4,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: poor Cjdpfxjx Rk R Ue Ap Dehd Description: ISO 3A (51 cm) Capacity 4,500 kg Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,200 mm ID OS1836

Condition: good (used), Technical data for the extension brackets: Manufacturer: Bito Type: PRO Scope of delivery includes: 02x extension brackets, used Material color: Sendzimir galvanized Total height: approx. 295 mm Total width: approx. 85 mm For frame profiles: P6, P5, P4 Chsdpjyfl R Dofx Ap Ded Depth: approx. 40 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 2.02 kg Note: No fastening material included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is additionally required, extra costs will apply, which can be quoted separately depending on delivery location and scope of delivery.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Chjdpfx Ajyfvwbsp Ded Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, Complete extrusion line for PVC profiles, fully overhauled and tested EXTRUDER: • IDE 75/25 type ME7/3 • single screw, PVC profile geometry and barrel in good condition • screen control (retrofitted by the manufacturer) • year of manufacture: 1993 • 35kW motor, 4 to 40 rpm COEXTRUDER: • IDE MEB 30/25D • Single screw Ø30mm 25LD • PVC profile geometry screw and sleeve in good condition • Year of manufacture: 1992 Chsdpfx Apeya Elds Djd • 3.8kW motor, 6 to 64 rpm CALIBRATION : • IDE • Length: 2 metres • 2 vacuum pumps, 16 valves • 14 water valves • Manual horizontal and longitudinal adjustments HAUL OFF: • IDE ME30/5 • Year of manufacture: 1993 • Contact length: 1100 mm • Width: 100 mm CIRCULAR SAW • IDE ME52 • Blade: 300 mm • Pneumatic carriage travel 180 mm • Year of manufacture: 1991 TILTING TABLE • IDE • Length: 4000 mm • Pneumatic movement Everything is in very good overall condition, the machines are very clean and ready for use.

Condition: good (used), Year of construction: 2008, Professional, compact, and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approximately width 650 x height 500 mm, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system as well as a quick-change coil system. -Up to 70 strappings per minute. -Strap tension adjustable. -Soft tension possible. -Automatic strap feed. -Strapping activation possible from both sides (optionally from the front or rear of the machine) via foot pedals. Alternatively, automatic strapping activation via sensor in the tabletop is possible. Chodoy Akphspfx Ap Ded -Wear-free strap guides with quick-change system. -Machine can be moved and locked using castors. -Documentation includes operator’s manual, spare parts lists, and wiring diagrams. The machine can be demonstrated under power.

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 2,200 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Cjdpfx Apsyzdfys Dehd Description: Year 2015 ISO 2A (41 cm) Capacity 2,200 kg Sideshift Opening range 560-1,930 mm Width 1,200 mm Forks 1,150 mm ID OS1937

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility Chodpfx Aey H U Upop Dsd The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. Cedpfx Aeyxxgmsp Dshd PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED OPTICAS SETTING STAND

Year of construction: 2026, condition: new, Complete roll forming line for solar C profile production with punching, width adjustment and turnkey automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This Solar C Profile Production Line is designed for the manufacturing of high-quality C profiles used in solar mounting structures and renewable energy projects. The system provides a complete turnkey solution from coil feeding to finished profile output. Engineered for precision, durability and production flexibility, the line ensures stable operation, accurate punching, consistent forming quality and long-term industrial performance. ⚙️ PRODUCTION RANGE The system can produce different C profile sizes according to project requirements: Web Width: 80 – 200 mm Flange: 40 – 60 mm Lip: 20 – 25 mm Material Thickness: 3 – 4 mm Custom profile dimensions are available upon request. 🔧 LINE CONFIGURATION The production line consists of: Hydraulic Coil Loading Car Hydraulic Decoiler Pinching Unit Straightener & Welding Station Servo Feeder 40 Ton Punch Press Roll Forming Machine Hydraulic Fix Type Shear Conveyor System Optional Automatic Stacking System ⚙️ ENGINEERING FEATURES Servo-controlled feeding system for accurate punching positions Programmable feeding with multi-job memory Chsdpfx Ajy Any Rop Ded High precision punching and forming process Roll forming machine with NC width adjustment Hardened rollers for long service life Heavy-duty machine frame for continuous production PLC & HMI controlled automation system ⚡ OPERATIONAL ADVANTAGES Complete turnkey solar profile solution Flexible production for multiple profile sizes High product consistency and repeatability Reduced labor and improved efficiency Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Solar mounting systems Solar farm structures Renewable energy projects Steel support profile production Infrastructure projects 🧩 OPTIONAL CONFIGURATIONS Automatic stacking system Different profile dimensions Tooling for customized hole patterns Automation upgrades Turnkey factory integration solutions 📸 REFERENCE PROJECTS Images included in this listing show reference installations of similar solar profile production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references, videos and technical details can be provided upon request.

Condition: like new (used), Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: SG202640, total length: 1,500 mm, power: 4 kW (5.44 HP), overall weight: 650 kg, total width: 800 mm, total height: 1,150 mm, input voltage: 380 V, warranty duration: 12 months, Pipe Shrinking, Profile Forming Machine SG40NC Machine Model: SG40NC Product Description: Microcomputer-controlled and hydraulically driven. Equipped with a mobile foot switch featuring three functions: automatic operation, emergency stop, and continuous emergency stop, ensuring high safety. Capable of multiple processing methods including tube Forming, tube expanding, tube end blunting, and bulging. Processed shapes include concave-convex joints, elongated, flat, square, flared, angled, V-shaped, open elbow, etc. Molds can be changed according to the user’s processed products. Mold replacement is simple and convenient, facilitating flexible production. The machine has a compact and sturdy structure, uses hydraulic power, operates stably with a high yield rate, minimal vibration, and low noise. It can perform tube end reduction, expansion, bulging, upsetting rib forming, and other shape forming processes. Suitable for processing various shapes at the connecting parts of pipe fittings (for insertion), automotive oil pipes, air ducts, water pipes, and air conditioning pipes. Cjdpfoyak Ikjx Ap Dohd Maximum Tube Forming Capacity mm Ø40×2mm Maximum Tube Forming Length mm 100mm Motor Power kW 4 Weight kg 600

Condition: used, functionality: fully functional, PROFILE BENDER FOMP Chjdov Ifq Eepfx Ap Dod DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG

Condition: good (used), functionality: fully functional, machine/vehicle number: 3005, Foellmer Motor Perforating Machine 45 ME with creasing and micro-perforation tool (see image) Activation: Electrically via foot switch. Working width: 45 cm / Table size: 60 x 35 cm Chjdpewu Dvfofx Ap Ded Performance: Up to 15 sheets (depending on material) Dimensions H x W x D in mm: 1120 x 600 x 1000 Weight: 117 kg Connection: 400 V / Operating manual included. Shipping at buyer's expense possible. Collection possible. Our offers concern used machines, which may show signs of use (minor scratches or yellowing).

Condition: good (used), Offer 25178 Technical Data: - Table surface area approx.: 1200 x 800 mm Codpfx Aowu T H Tjp Djhd - Hole diameter: 28 mm - Hole spacing: 100 mm - Table height: 880 mm - Lighting - Power strip - Pneumatic connection - Space requirement approx.: W 1400 x H 2400 x D 1100 mm - Weight approx.: 150 kg

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Immediately available MAN TGS 35.510 - EURO 6, Tipmatic - Automatic transmission 8x2 Three steered axles STEER / LIFT axle Front support approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Step plates Chequer plate floor Removable drop sides 9 x LED lights Retractable oversized load markers up to 3500 mm width Start/stop Rotating beacons 8 x stanchion pockets 6 x lashing rings 6500 daN Toolboxes Chodowuhwyopfx Ap Ded Trailer coupling (AHK) Storage compartments Storage bins 20-foot container locking system Perforated side profile with 2500 daN lashing rings Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, winch, cross-type radio remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory kit for winch operation, foldable roller, quick coupling between main boom and fly jib, and more...

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets 6 x lashing eyes, 6500 daN Toolboxes Csdpfxewuhxwe Ap Dohd Trailer coupling (AHK) Storage compartments Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: used, Year of construction: 2006, 32 x 65 cm - Maximum paper size: A3 (up to SRA3 format) - Functionality: Multifunctional finishing for creasing and cutting - Applications: Ideal for business cards, brochures, and other printed materials Codpfowv D Hmsx Ap Dohd - Efficiency: Precise cutting and creasing for a fast and accurate workflow

Condition: new, Year of construction: 2026, shaft diameter: 50 mm, - Shaft diameter 50 mm - Rotates clockwise and counterclockwise - Suitable for horizontal/vertical use - Foot control Chedswv Ufaepfx Ap Ded - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1987, Edge and profile sanding machine with new feed beltused, great condition, little used, top equipmentMake ArminiusType ST-4Year of construction 1987Machine no. 1948Belt feed with top pressure rollers and support roller conveyorapplication-controlled sanding pad that can be exchanged for a profile sanding bodyProfile grinding spindle with infinitely variable speed controlGrinding spindle 28 x 90 mm1.5 kW / max. 1,500 plessWorkpiece passage height 0-100 mmMotor 1.5kWMotorized oscillation 0.02 kWVeneer edge grinding device with controlled shoefront table approx. 500 mm x 1350 mmUnit tiltable 0-90°Belt length 1600 mmBand width 150 mmBelt speeds infinitely variablemobilemiter gaugeRound edge grinding deviceInfinitely variable feed system - belt feed with top pressure 5-25 m/e tiltable 0-90°New price approx. €25,000.00Suction connection 100 mmSpace requirement approx. 1350 mm x 930 mm x 1100 mmWeight approx. 280 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenWithout guarantee and guarantee Chsdpfxevwfx Ie Ap Djd

Condition: excellent (used), total width: 500 mm, total height: 280 mm, conveying length: 3,000 mm, working height: 280 mm, load capacity: 1,000 kg, Price for: 1 unit of roller conveyors (total length 3m) = 75 EUR plus VAT For larger quantities, price on request. Roller conveyors for the furniture industry, WTT Fördertechnik, Type 121 Total of 750 units of complete roller conveyors, each 3m long (total of 2250 running meters) Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm +/- 25 mm adjustable Number of feet FA = 1 unit per running meter Load capacity approx. 1000 kg 1 unit consists of: Csdswwmkdjpfx Ap Dshd 1. 2 units of side rails, each 3000 mm long, made of profile 20/80/40/3 mm, with a pitch of 25 mm, perforations suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. 2. Insertable load rollers, 15 units Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness Axle - 12 mm spring axle Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel, uncoated. Installation length IL = 500 mm 3. 3 units of screw-on bridge support feet in a stable, welded construction made of special profile with a cross brace, adjustable in height by +/- 25 mm via a threaded spindle M16 with a screw slot. With floor mounting plates and dowel holes. Powder-coated in RAL 3000 red. Weight – 2.5 kg (Subject to changes and errors in the technical data, as well as prior sale)

Year of construction: 2012, operating hours: 6,047 h, condition: ready for operation (used), functionality: fully functional, rotational speed (max.): 24,000 rpm, travel speed (max.): 60,000 mm/min, working length: 7,500 mm, machine/vehicle number: 0809-M_001327515, number of slots in tool magazine: 16, number of axes: 14, TECHNICAL DETAILS Number of controlled NC axes: 14 Processing length: 7,500 mm Max. cross-section W x H / length for single bar processing: 400 x 300 mm / 7,500 mm Min. cross-section W x H / length for single bar processing: 30 x 30 mm / 300 mm Maximum steel wall thickness: 5 mm Max. traverse speed X-axis: 60 m/min Max. traverse speed Y-axis: 60 m/min Max. traverse speed Z-axis: 30 m/min Spindle speed range: 1 - 24,000 rpm Milling motor power: 16 kW A-axis rotation: ±110° continuous Chsdpfoxxiuxox Ap Ded C-axis rotation: ±220° continuous Tool holder: HSK-F63 Max. tool dimensions mill/drill (d/l): Ø 50 mm / 200 mm Max. tool dimension disc milling cutter (d): Ø 500 mm Number of stations in tool magazine: 16 Number of special tool positions: 2 Automatic positioning of clamping fixtures: Yes Number of clamping fixtures: 10 Profile systems with quick-change system: Yes Max. number of profiles per machine setup: Up to 10 profiles Number of profile punching units: 2 Automatic repositioning of clamps during 2 machining steps: Yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 15 x 4 x 5.64 m Weight: 12 t Operating Hours Power-on time: 24,613 h Spindle running time: 6,047 h EQUIPMENT Quick-change system for profile installations Automatic clamping fixture positioning 19" TFT color touch display Schüco CAM software Machine operation based on Windows 8 with menu navigation Self-programming without NC/CNC knowledge required

Condition: good (used), Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 key cell culture attributes. By combining up to five separate instruments into one user-friendly instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX autosampler collects samples from its two fermenters and transmits them to the FLEX analyzer's measurement unit. The data obtained by the FLEX autosampler was compared with data manually collected from the reactor, and statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO2 + PCO2), 4.0 minutes (chemistry/gas and osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15–30°C (59–86°F), Relative operating humidity range: 20–85% Sample size: 1 mL (for all modules) Sampling options: Single via syringe/beaker Automated batch with 20-position sample tray Online, automated from up to ten bioreactors Electrical requirements: 90–264 VAC, 50 to 60 Hz (universal power supply) System size: Height: 20 in (50 cm) Width: 26 in (66 cm) Depth: 20 in (50 cm) System weight: Analyzer: 94 lbs (42.6 kg) without Reagents Cedpfxeq Tp Tde Ap Dshd Modular test menu options Chemistry/Gases Cell Density/Viability Osmolality IgG System integration options Online autosampler Sample collection system OPC connectivity Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, empty load weight: 400 kg, maximum load weight: 900 kg, overall weight: 1,300 kg, loading space length: 2,850 mm, loading space width: 1,570 mm, tire size: 165r13c, Ingenious motorcycle trailer from *trailer manufacturer* *VEZEKO model MOTOVAN-B13. Suitable for heavy *motorcycles thanks to the split ramp, stable frame and many lashing options. The *motorcycle* can be safely driven or pushed directly onto the *car trailer*. The *motorcycle rockers* can be attached to the *motorcycle trailer* almost anywhere on the ground. The *rocker* can also be adjusted for different wheel sizes. The standard equipment of the *motorcycle transporter* includes two adjustable *motorcycle rockers*, four adjustable lashing eyes, *perforated profile floor* with anti-slip and lashing option, stable *drive-on flap* with perforated profile and support, welded *lashing eyes*, *support wheel, stable welded frame hot-dip galvanized* and a very stable *V-drawbar*. Accessories include a *drawbar box*, *motorcycle lashing straps*, *lashing straps, 100 km/h shock absorber, TÜV for 100 km/h* and* anti-theft device*. Codpfx Asqv Dq Hop Dshd

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Chjdpfxor R Auze Ap Dod Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection Cedpfx Apsrcm Rus Dshd - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)