Used Panel Beam Saw for sale (21,041)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Hfedpfx Aotk It Soacon Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Euromac panel saw complete with unloading and loading roller conveyors, used. Hsdpfxoqgtbws Aacofn

Condition: good (used), Year of construction: 2005, - Used machine - Year of manufacture: 2005 - Motor power: 4.4 kW / 400 V - Cutting length: 5300 mm - Cutting height: 2240 / 2100 mm - Cutting depth: 80 mm Hjdpfxsxd Rytj Aacofn - Saw blade diameter: 300 mm - Automatic plunging and sawing - LxWxH: 6612 x 1361 x 3018 mm - Ex stock, dismantled and loaded

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hfsdjw Nx A Iopfx Aacsn Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Automatic horizontal and vertical positioning for absolute and chain dimensions Digital display for horizontal cutting PLC control with 2-line display and plain text display for processing mode and error diagnosis infinitely variable feed rate up to 24 m/min automatic workpiece end detection Calculator function in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm max. trimming height 2100 mm max. scoring height, vertical 2100 mm max. cutting depth 80 mm Motor 5.5 kW Saw blade speed 4500 rpm Saw blade diameter 300 mm Air requirement 1200 m³/h Air speed 20 m/s static negative pressure 1200 Pa Extraction connection: 2 x 120 mm Dimensions L x W x H 5620 (plus extraction nozzle) x 1480 x 2948 mm Room height 2990 mm Compressed air connection: 6 bar Air consumption 50 NL/min Electrical connection value: 5.7 kW Hfsdpfx Ajw Nac Aeacon With Supercut scoring device With pneumatically pivoting saw unit With longitudinal stop for lower workpiece support With folding rail, short, complete Availability: by arrangement Location: Solingen

Year of construction: 2015, condition: ready for operation (used), Additional Equipment Highly efficient air cushion work surface Automatic double motorised side stop Optimised knife/pressure device with self-learning function Main saw motor 15 HP at 50 Hz Av.0YD Office labelling device Manual or automatic panel feed with roller conveyor Wincut Utility Cutty Office This SCM Gabbiani Galaxy T3 110A panel saw was manufactured in 2015. It features a main saw blade with a maximum projection of 115 mm and speeds ranging from 1164 to 3492 rpm. The machine includes a highly efficient air cushion work surface and an automatic double motorized side stop. Consider the opportunity to buy this SCM Gabbiani Galaxy T3 110A panel saw. Contact us for more information about this machine. Application Types Sawing (Wood) Hodpfx Aoxadn Aeacofn

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% Hfjdpecbq Nwefx Aacon massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Machine no.: 211.178 Year of manufacture: 1998 With front and rear feed Technical data Saw length 4200 Pusher 4100 Hfedpfexf Idxex Aacjn Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 105,000 EURO!!! Price valid only until October 30, 2025! Don’t miss the opportunity! We invite you to purchase a NEW, premium panel saw—HOMAG SAW-TEC B-400 Pro Line, extended version for automatic storage integration. The SAWTEQ B-400 is a panel saw from HOMAG equipped with automatic loading for high-speed cutting. This efficient saw is designed for handling large panel volumes and delivers superior-quality finish cuts. It is renowned for reliability, precision, high power, and rapid processing speed. The unit offered here is BRAND NEW. It was bought from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our facility by the manufacturer. The HOMAG POLSKA Sp. z o.o. service team performed only the initial startup; the machine has never been used since. In the woodworking machinery industry, both Homag and this model are benchmarks—Homag is a global leader in modern, top-quality equipment. Our unit is exceptionally well-equipped, offering almost all available options. A similar saw in its standard version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and equipped with additional features, is valued at around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput thanks to automatic loading and extended saw blade reach. - High productivity with relatively low space requirements. - Designed for efficient material flow and precise logistics. - Network-ready for digital production processes. We maintain direct contact and support from HOMAG for installation and commissioning at the buyer’s site if needed. In our view, the discount of over 45% off the new price represents an extremely competitive offer for anyone seeking a modern saw with or without future automatic storage needs—resulting in potential savings of about 90,000 EURO net (approx. 400,000 PLN net)*. The saw can be operated independently without connection to an automatic storage system. General details regarding this sales offer: - The machine is BRAND NEW, but was manufactured in 2020; therefore, no warranty or guarantee is provided. - Returns are not accepted. - The advertised price does not include VAT (23% for Polish buyers), which will be added to the invoice—please check our listed price presentation. - Single owner. * Price in EUR converted at the NBP rate—1 EUR = 4.25 PLN. Welcome to all MachineSeeker users. We are new to MACHINESEEKER. We are not a furniture manufacturer, machinery trader, or production company. We are a developer with extensive property holdings in Poland, constructing homes and apartments in Warsaw. The machines we offer are our property, acquired as settlements from tenants in the furniture industry. We know their full history and confirm their condition as described. We also maintain relations with machine manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—who can provide further support. As we do not require these machines, our pricing is extremely attractive, especially considering their almost-new state. We can assist with delivery anywhere in Poland or the EU. Prospective buyers are welcome to inspect equipment before purchase. Kind regards. Hfsdpfx Aasw Exk Eocon

Condition: new, Year of construction: 2025, Maximum horizontal cutting length: 4200 mm Maximum vertical cutting height: 2200 mm Maximum horizontal cutting height: 2080 mm Maximum cutting thickness: 60 mm Hsdpfxjxga H Ij Aacefn Motor power: 5 HP (3.7 kW) Blade diameter: 250 mm Blade speed: 5300 rpm Horizontal digital display Vertical digital display

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software SIEMENS WinAC RTX Outside Roller table for pre-loading (mm 5600 x 2200) + Pre-Loading Buffer Lifting table (mm) 4300 x 2200 Turning device (rotating unit) at 90° No. 2 Rear pushers (one with clamps / grippers) Twin Pusher - DUPLUS2 No. 12 clamps / grippers Max. cutting width (mm) 4300 Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 145 Max clamps opening (mm) 150 Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 480 mm - Kw 27 Hfsdpfot Ah Nisx Aacsn Adjustable speed of the saw carriage (m/min) 6 - 150 Front supporting tables with Air blowing system (N.) 4 Total power (Kw) 42 (ca.) OPTIONAL: Optimisation software: HPO

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 92 - 03 - 184, cutting length (max.): 2,800 mm, cutting width (max.): 2,800 mm, cutting width at rip fence: 1,000 mm, cutting height (max.): 105 mm, cutting height with scoring (max.): 105 mm, saw blade diameter: 350 mm, main saw diameter: 350 mm, height adjustment type: hydraulic, overall weight: 1,000 kg, trimming length: 2,800 mm, slide length: 2,800 mm, table width: 1,000 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, input voltage: 400 V, pivoting range: 45 °, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), sliding table length: 2,800 mm, Equipment: motor brake, scorer, Machine is in good condition. The double roller carriage runs on a steel guide and has a locking mechanism in the end position. Speeds: 3, 4, 5, 6,000 rpm. Scoring unit: 9,000 rpm. Hsdpfxsxa E Azs Aacsfn

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal saw cuts: -via scale from 0 - 2,070 mm -via strip cutting stop from 75 - 500 mm Measurement readout for vertical saw cuts: -via scale from 0 - 1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Features: -ADVANCE clamping system, consisting of 2 pneumatic clamping tongs that can be motor-driven up and down on vertical axes with a ball screw spindle. The clamps support panels up to 150 kg. -Torsion-resistant, free-standing machine frame -Round bar guides, vertical and horizontal -Pneumatically retractable slatted frame -Finely adjustable folding stop with stop extension -Fine adjustment for horizontal saw cuts via handwheel -Strip cutting stop -Manual programming rail with 5 T-slots -Pneumatic plunge for the saw unit -25 material support rollers -1 infeed and 1 outfeed roller Hodpfow I U D Esx Aacjfn -Pneumatic workpiece clamping device between support rollers -3 center support elements, pneumatically extendable -Pneumatic saw head lock -Operator panel with document holder -Control unit on saw assembly: start button, stop button -Tool cabinet -Scale illumination for vertical saw cuts Partnership Edition features: -Digital display for folding stop -Digital display for saw unit with incremental function -Pneumatically tiltable saw unit -Scoring system with controlled counter-air nozzle, numerical display for scoring or groove depth adjustment, and activation indicator -5.5 kW motor including star-delta starter -Cutting line laser Availability: short-term Location: Hochheim

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Hfjdpfx Aastxirfscon for 3 m sliding carriage

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Bundle Height and Panel Thickness Maximum bundle height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Information Maximum clamp opening (K): 90 mm Working height: 970 mm Total height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at the infeed) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw unit forward speed: 5 - 120 m/min Saw unit return speed: 120 m/min Infeed forward speed: up to 80 m/min (Europe: 25 m/min EN 1870-13) Infeed return speed: up to 80 m/min Hfedew Upviopfx Aacen EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: good (used), Year of construction: 1993, Panel Saw Manufacturer: Striebig Model: Standard II Plus 6220 A Year of manufacture: 1993 Cutting length: 5,300 mm Vertical cutting height: 2,200 mm Horizontal cutting height: 2,100 mm Cutting depth: 80 mm Saw blade diameter: 300 mm Hfsdpfjw N Saasx Aacen Speed: 4,750 rpm Power: 4 kW Dimensions: 6,470 x 1,281 x 2,885 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Panel saw Putsch Meniconi SVP 145, year of manufacture 2001, max. vertical cutting height 2200 mm, max. horizontal cutting height 2020 mm, maximum cutting width 5200 mm, max. cutting depth 60 mm, motor 3 HP, saw blade diameter 250 mm, overall dimensions 6300 x 287 x 550 mm, weight 780 kg. Located in Schmallenberg. Hfsdpfxew Eckio Aacen

Condition: used, Year of construction: 2007, functionality: fully functional, Cutting width 4300 mm (4450 mm) cutting depth 2600 mm cutting height 150 mm back loaded + rotation table + air cushion table at cutting line motor 18 kw sawblad Ø520 mm Hjdpjwg Avzjfx Aacefn scorringblade Ø200 mm 12 pcs grippers on the pusher MACHINE AVAILABLE FROM WEEK 46/2025

Condition: used, Used Machine Used Holz-Her Type 1211 Vertical Panel Saw Older model; only suitable for rough rip cutting MNo.: 360726 Technical Specifications: Cutting length approx. 5300 mm Cutting height approx. 2200 mm Cutting depth approx. 80 mm Max. saw blade diameter 300 mm Motor power 4 kW Availability: Short term Hsdpfxowka Ngs Aacefn Location: Röllbach

Condition: used, Used Striebig panel saw Model Standard 6220 Year of manufacture ~1977 Cutting length 5300 mm Cutting height 2200 mm Maximum cutting height 80 mm Motor power 4.4 kW Speed 4750 rpm Blade diameter 300 mm Machine length 6300 mm Machine width 1257 mm Machine height 2860 mm Hfedpfx Aajwcqa Tocjn

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Hodpfexfvp Aex Aacefn Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: like new (used), Year of construction: 2020, Total Cutting Performance: 24,000 linear meters Cutting length: 4400 mm Air-cushioned machine table, version with stop ruler on the left Width stop / Cutting width: 3100 mm, with SL 4400 welded steel construction – absolutely stable and torsion-free, running on linear guides Angle air-cushion table and stop ruler: 1800 mm 2 air-cushion support tables: 1800 mm Additional air-cushion support table: 1800 mm (total of 4 tables) 4 feed rollers on the front side (1 per table), Part No. 5030631 Electrical system: Standard 400 V, 50/60 Hz Saw carriage: Cast version for SL 4400 Main saw motor: 7.5 kW, 400 V, 50/60 Hz Scoring unit motor: 2.2 kW with electric adjustment Automatic cutting length detection Motor-driven groove height adjustment Automatic / manual infinitely variable cutting height adjustment Quick-change clamping system: Pro-Lock Side alignment Single Press SL 4400, pneumatically and program-controlled Hfodpexlthpofx Aacsn Max. number of workpiece clamps: 9 workpiece clamps (6+3) for cutting length 4400 mm Operator console: CUTCONTROL 2 multitouch control system, 21.5" Full-HD screen, 16:9 format Manually operated device incl. stand Label printer and software Uninterruptible power supply (UPS) EASY-PLAN – Dongle version OPTI-CUT – Machine software Opti Pro – Office optimization software

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Hfjdpfswxr Dxjx Aacen

Condition: used, Year of construction: 2007, HOLZ-HER – 6310 CUT 110 580 Computer-controlled Panel Saw Watch the video of the machine: Year of manufacture: 2007 Machine number: 136 The machine has been overhauled in all essential mechanical components. New PC, new label printer, etc. in 2023 Technical Specifications and Description: Base machine: Pressure beam saw Version: Fence on the right Saw cycle: away from the fence Cutting length: 5,850 mm Cutting width: 5,850 mm Saw Blades: Main saw blade Ø 400 x 4.4 x 30 mm, Z72, FZ/TZ (not included!) Tungsten carbide pre-scoring blade Ø 180 x 4.4/5.4 x 30 mm, conical (not included!) Cutting Height Cutting height: 110 mm Saw blade projection: 120 mm Pressure beam: pneumatic, pressure adjustable Extraction: Central moving dust channel on the unit Extraction port base machine: 1x Ø 160 mm, positioned on the right side Dust channel in pressure beam: 2x Ø 120 mm – 1x top left, 1x top right with cutting length 5,850 mm: 3x Ø 120 mm – 1x top left, 1x top center, 1x top right Extraction air velocity: 30 m/s Air volume: 4,000 m³/h at 30 m/s Compressed Air Air consumption approx. 32 l/min at 6 bar per cutting cycle Switchable collet chuck pressure Switchable from the control panel For sensitive panel materials Automatic cutting length limitation The saw unit detects the workpiece end using a non-contact sensor and optimizes the cutting cycle Offcut device Hfsdpfx Aaow I Uxpecen For cutting without leftover piece Clamps retract into recessed pressure beam Width Stop Precision-guided, freely programmable width stop with clamps Rack-and-pinion drive for precise positioning With surface-hardened linear guides Return speed of panel pusher: 80 m/min Forward speed of panel pusher: 80 m/min (EU – max. permissible forward speed 25 m/min) Max. opening for clamps: 120 mm for longitudinal and cross cuts Clamps, floating design Compensate for internal stress in panel packs upwards – 6 pcs for 3,250 mm cutting length – 7 pcs for 4,250 mm cutting length – 8 pcs for 5,850 mm cutting length Control CUTCONTROL 2 with 15" TFT display Operating system Windows 2000 RJ45 network connection 10/100 Base-T Fast Ethernet Intel Celeron processor Midi tower US keyboard Optical mouse CD ROM drive Control panel located on fence side Clearly arranged graphic-based operator interface for easy handling and order/material management on Windows basis Realtime display Large, clearly structured buttons All functions accessible from one level No limits in input fields and unlimited job inputs possible Control Functions Direct Cut: Cutting by direct entry of cutting dimensions. Processing of absolute, serial, or format cuts, with integrated grooving, notching, or positioning cuts. Unlimited jobs programmable. Job prioritization (prioritization possible at any time). Order programming parallel to cutting. NC Cut: Processing of optimized jobs. Graphical machine overview with machine process flow function ...

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1984 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Saw blade diameter: 300 mm Hjdpfjw Hh Tfsx Aacsfn Motor: 4.4 kW Continuous central workpiece support Note: Wall-mounted! Location: Darmstadt Availability: Short-term