Used Paint Booth for sale (3,849)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. Dksdpfx Acowzl Hxenjr • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. Dedpfx Ajwzmcbocnskr OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Dkedpfx Acjxa H Ewsner (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Dkedpfog R Sh Asx Acner Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, used, good conditionnumber of tiers 14tier depth approx. 550 mmspace requirement approx. 1200 mm x 800 mm x 175 mmstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Dedpewi Rn Djfx Acnskr

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 1000x1000 mm- Motor rating 1.5 kW, 3.4 A, 3 Ph, 400V/50 Hz/1410 rpm- Flow rate 4600 m³/h- Usable negative pressure 500 Pa- Filter surface 1.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 4600 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 1-stage switch, +5 m connection cable with power plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1012x1405x915 (1887x1405x1144)- Weight device approx. 175 kgItem No. 195 627 01 Dkjdpfxsv Svcyo Acnsr

Condition: new, - NEW -- stable tubular frame construction- Extendable from 200 to 2000 mm andlockable to any desired width- 17 shelves on both sides possible- 4 polyamide castors, capacity 400 kg- Supporting tubes galvanizedTechnical specifications:Support pipe length: 650 mm- extended to: 1150 mmLight intermediate dimension of the tubes: 60 mmLength: 200 - 2000 mmDepth: 870 - 1180 mmHeight: 1855 mmItem No. 13-03000001 Dsdpovwfvmefx Acnskr

Condition: new, Technical data:Max. Flow rate in m3/h: 6.800Max. Negative pressure in Pa: 500Rated motor power: 0.75/ 2.1 kW ex (suitable for installation in zone 2 according to ATEX)Filter area in m2: 2Dimensions ( W x D x H) in mm: 2,971 x 1,405 x 1,131Connection diameter: 300 mmSwitch: 2-stage5 m cable with plug and throttle valve Dkjdpfx Acovwfm Ssner

Condition: new, The inexpensive shelf trolley Ecoflex isfor space-saving and gentle storageof painted workpieces. ByThe Ecoflex can also use its 4 swivel castorsTransport of workpieces can be stable tubular frame construction letscan be adjusted from 200 to 1500 h its 17 plastic-coatedSupport tubes on each side, the trolley canWeights up to 400 kg with a uniformabsorb distributed load. The pluggable onesSupport tubes can optionally be removedand can be reinserted on the backwill. When not in use, theAssemble shelf trolleys to save gth: 200 - 1500 mmDepth: 870 - 1180 mmHeight: 1855 mmSupport tube length: 650 mmClear intermediate dimension of the tubes: 70 mmLoad capacity: 400 kg Dsdpfxjvwf Eho Acnskr

Condition: new, - NEW -- Compact design, space-saving- Powerful, high suction power, low operating costs- Easy to maintain, long filter service life- Universally applicable, variable accessories- High flexibility- Mobile design- Extraction technology with front panel system- mobileTechnical specifications:- Intake manifold 2000x1000 mm- Motor rating 2.2 kW, 4.6 A, 3 Ph, 400V/50 Hz, 1430 rpm- Flow rate 6800 m³/h- Usable negative pressure 500 Pa- Filter surface 2.0 m²- Filter cleaning none- Filter material green (1 piece)- Filter load 3400 m³/m²/h- Residual dust content Max. degree of separation approx. 97%- Automatic control none- Electrical connections 2-stage switch, +5 m connection cable with power safety plug, 1-pole, 10A fuse on site,- Compressed air supply None- Max. sound pressure level 72 dB(A)+measurement uncertainty 4 dBDIN EN ISO 11201 free field measurement- Running gear 4 castors with thermal coating, D=75 mm- Dimensions (W/H/D) mm 1912x1405x946 (2969x1405x1218)- Weight device approx. 248 kgItem No. 195 752 01 Dedpfx Aov Svc Hscnskr

Condition: new, Year of construction: 2026, Powder coating booths, sizes defined by customer, Additional equippment possible. Djdoizw Hyopfx Acnokr

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Dsdpfx Aervi Riscnskr

Condition: new, Year of construction: 2026, We have to offer you: TPW1010 paint wall Working dimensions (mm): 1000 (width) x 800 (depth) x 1000 (height). Total dimensions (mm): 1200 (width) x 1200 (depth) x 2200 (height) Dkodpfxsd S N Nao Acnsr Standard equipment: • Fan power: 1.5 kW, • Capacity: 4500 m³/h, • Compression pressure: 930 Pa, • Lighting: 2 x 18 W, • Ex explosion-proof fan, • 3-stage air filtering, • Paint stop filter, Bymtqagwao • Filter nonwoven fabric, • IP 66 control panel, • Hermetic lighting IP 65. Our cabins are characterized by very high quality of workmanship, safety of use and the selection of cabin parameters to the existing building. We advise on the selection of painting booths, dust removal systems, exhaust systems and industrial heat recovery. CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our customers. All BUMEX SP. Z O.O. products have a WE certificate. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: new, Year of construction: 2026, We offer you: Paint wall TPW1515 Dedpjg Sikrefx Acnjkr Working dimensions (mm): 1500 (w) x 800 (d) x 1500 (h). Overall dimensions (mm): 1800 (w) x 1200 (d) x 2200 (h) Standard equipment: • 1,5 kW fan power, • Capacity: 8 640 m³/h, • 930 Pa compression, • Lighting: 2 x 36 W, • Explosion-proof Ex fan, • 3-stage air filtration, • Paint stop filter, • Filter fleece, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O.. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, 4 UNITS AVAILABLE FOR IMMEDIATE DELIVERY with 15 support rails (rail surface: edge trim) Dksdpfogmht Sex Acnsr Dimensions: L x W x H 910 mm x 700 mm x 1850 mm Shelf depth: 510 mm Shelf width: min. 500 mm - max. approx. 2000 mm Distance, clear width from the shelves: approx. 78 mm Load capacity: max. approx. 600 kg evenly distributed Load capacity/calculation: approx. 40 kg Weight: approx. 90 kg

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Dksdpfjtu Hpqjx Acner Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. Dodpfxotu H Avo Acnjkr The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. Dkodpfx Aotu H Hcjcner It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. We would also bring the device to us from Frankfurt.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 12 Ratings ✈️ Shipping : 3-4 weeks ✈️ ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✅✅✅Energy class A+++✅✅✅ ⭐Offer Price €6,220 EXCL. VAT & SHIPPING ⭐ ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time 3-4 weeks❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨ Strong ✨ Economical ✨ Efficient ❗❗❗The fastest delivery time! Go direct from the manufacturer❗❗❗ ►►►PROTON - WETLINE EX paint booth - VENTILATION CHAMBERS◄◄◄ ⭐WETLINE-EX-800-PRO⭐ ✔️ MOTOR POWER : 0.55 KW/H ✔️ FAN PERFORMANCE : 8000 M3/H ✔️ CARTON FILTER AREA : 2.6 m2 ✔️ FIBERGLASS FILTER AREA : 1.44 m2 ✔️ PANEL FILTER NUMBER G3: 2 PCS ✔️ PANEL FILTER AREA : 1.7 m2 ✔️ PRESSURE GAUGE : YES ✔️ MOTOR CONNECTION : BELT CONNECTION ✳️CABIN SOLUTION FOR LOW COST✳️ Exhaust/supply pods are ideal for converting an area in your factory for spray painting. They can also be used to create a prep area for sanding or cleaning parts prior to finishing. We have designed a variety of exhaust/supply chambers to meet your finish requirements while minimizing your footprint. Our exhaust/supply chambers share the same design features as our large industrial booths. ✳️ECO-FRIENDLY✳️ Each supply chamber meets safety and code requirements - NFPA-33, IFC to protect those working in an industrial spray environment and the environment outside. Their extraction/supply chamber is designed to efficiently remove overspray from the painting process while maintaining an even flow of air throughout the work area. ✳️FLEXIBLE AND ADAPTABLE ✳️ Dodpfec Uthxex Acnskr You will find that our chambers can be designed for both types of care. Supply Chambers are supplied with exhaust fan and motor as a package, with Supply Chambers specifically designed to accommodate an Air Supply Unit ✳️CNC AND CAD TECHNOLOGY✳️ Panels are made from Premium 1.5 - 2.0mm. Galvanized G-90 steel and precision stamped on m5 centers allowing for easy installation of nuts and bolts and it has reinforced construction to support the fan placed on top. ✳️QUIET EXHAUST FANS✳️ Typically operates at low dBa noise levels below OSHA limits ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, AUTOMATED PAINT SHOPS These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, glazing, coating, washing and similar system requirements. Dksdpedy Ez Ijfx Acner

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. Dksdpfx Acody Dw Ajnsr These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,000 mm, total width: 3,500 mm, total height: 2,950 mm, inner dimension height: 2,650 mm, inner dimension length: 4,900 mm, inner dimension width: 3,400 mm, Equipment: cabin, Automotive Spray Booth The automotive spray booth is a fundamental device in paint repair technology. It enables painting operations to be carried out in safe and comfortable conditions while minimizing the negative impact on the surrounding environment and the workspace. Specifications: - External dimensions: 5000 (+ air handling unit 1350 × 2900 mm) × 3500 × 2950 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 700 × 2000 mm - Structure: made of steel sheets - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface Double Ceiling: - External ceiling paneling - Full-surface plenum chamber for air supply Air Exchange System: - Supply system: - Jet turbine 4 kW – 2 units - Airflow capacity: 26,000 m³/h - Airflow system: - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 18,000 m³/h Lighting: - 8 side-mounted lamps - Ceiling lighting: 24 LED tubes Air Heating System: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heating time: 8–15 minutes Dkjdexnpczspfx Acnor Filtration System: - Double-layer filtration structure - High-capacity air purification system with filtration efficiency up to 99%

Condition: new, Year of construction: 2026, The illustrative photos show the realizations for the customer of the 4x7 cabin The offer applies only to the painting booth without the preparation area (possibility to purchase a preparation zone at the customer's request) - External dimensions: 7000x4000x3500 mm - Internal dimensions: 6900x3900x2650 mm - Entrance gate: 3000x2600 mm (three wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 16 kW - Floor fully grated - Air supply system: Jet turbine 4.0kW - 2 pieces Dkjdper Ha Ehsfx Acnjr - Exhaust system: Stream turbine 5.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 32pcs. - Side lights: LED panel 120x30cm - 8 pcs. Power: 48W - one piece 1000 lumens - Burner Riello 40 G20 95-213 KW - The cabin is available in different colors

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go - Paint booth wall - fully barred Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: Dedenbd Rropfx Acnokr -Riello 40G20 oil burner -Heating time 10 -15 min dkm3db -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor

Condition: new, Year of construction: 2026, A two-zone container divided into a paint shop and a preparation zone -External dimensions: 6058x2438x2591 mm -Internal dimensions: 5538x2170x2485 mm - Sea container: 20DV - Door: integrated into the cabin door - Windows: with metal protective mesh - Lighting: 4 led lamps -No assembly required - ready to go Dedpenbd Nbofx Acnjkr Steering - Automatic from the central block located outside; Power - 380V Supply: Eo3il2moj -Fan - 3 Kw - Flow velocity - 0.7 m/s -Air flow: 9500 m3/h -Recirculation - closed circuit Heating: -Riello 40G20 oil burner -Heating time 10 -15 min -Max temperature 800°C Filters - preliminary, paint-stop, cardboard, carbon Security: -Emergency stop -Pressure lock on the door -Temperature monitoring system -Error indication Equipment: -16A socket -Air preparation team - Pneumatic retractor