Car transport

KALEPAR KLP 119V3 - 1 Achsen Caravan Transporter

Condition: good (used), 17 rolls, Ø 54 mm strip width: max. 1.450 mm strip thickness: max. 2,5 mm Lsdpfxsbifrye Aa Eehr

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm Lhodpfx Askt Nqqja Esr - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg

Condition: used, Pillar drilling machines Lsdeb N Ezrjpfx Aa Eshr

Condition: new, power: 177 kW (240.65 HP), fuel type: diesel, color: yellow, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Vehicle transporter for transporting 3 vehicles. Car, van or caravan * Motor vehicle with superstructure for transporting 1 passenger car or a van or camper van * Loading area lower platform: approx. 660 x 250 cm. * Hot-dip galvanized body * Interior dimensions 660 x 250 cm. Lodpfx Aaom Tkcis Eshr Trailer: * BLYSS - Single-axle center-axle trailer max. 9,000 kg GVW * Loading area approx. 960 x 240 cm. * Internal dimensions approx. 990 x 250 cm. * 10 tons BPW axle * ABS * Trailer equipped with perforated road plates * Vehicles can be secured in any position according to DIN * Trailer hot-dip galvanized Load securing also available from us: * Tensioning and lashing straps * Locking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies- Complete vehicles- Trailers- Advice- Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER -1x 9 ton SAF or BPW axles -100% galvanized / 100% galvanized -GVW: 19.500kg -Empty weight: approx. 5500kg -Wabco 2S-2M EBS brake system -Aspöck 24V electrical system - EU standard Lhodpfx Aajkbyt Is Eor -Air suspension -Hydraulic cable winch Hammerwinch 8t with radio remote control radio remote control (Teleradio) -Hydraulic rear extension in full width 2550mm and length 1500mm -Length: 11800mm -Length with extension: 13300mm -Width: 2550mm -Saddle height: approx. 1050mm - 1150mm (other saddle heights also possible) -Tire brand: Goodyear, Pirelli or Continental dual tires Spare wheel with spare wheel holder 24v 4.5KW electro-hydraulic motor for cable winch, loading platform and rear extension Modifications possible according to customer requirements Paint finish freely selectable / free of charge All documents COC,Tüv,etc. for registration available. For more info: kalepar *The pictures are example. Copyright cannot be claimed. ---

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition Lhsdpfx Ajn N Ekcoa Ejr

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Ledoharwvspfx Aa Ejhr Good condition

Condition: good (used), Machine 1 pictures 1-5 Alzmetall AB 40 SV Price 9500,-€ drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2,4KW Machine weight approx. 500kg Machine 2 pictures 6-12 Weipert SBM 49 Price 4.250,-€ drilling capacity 40mm table 560x560mm quill stroke 180mm Spindle MK 4 Speed 50-1450 rpm Lhsdpfsu Nm Tbex Aa Ejr Steps 12 Feed rate 0.1-0.2 H8Vxu2W Spindle table 770mm throat 350 mm Motor 1.5 KW Thread cutting device pictures 13-16 Gillardon GB 40 VE Price 3.690,-€ Year of construction: ca.1988 L x W x H: approx.630x985x2020mm Weight: approx. 620kg Drilling capacity ( steel ): approx.40mm Drilling capacity ( cast iron ): approx.50mm Tapping capacity: M27-M33 Tool holder: MK4 Speed range, stepless: 60-1600 rpm Table clamping surface: approx. 640x530mm Feed range: approx. 0.1;0.16;0.25 mm/rev

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Lodskqmuuepfx Aa Eshr Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval.

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Your authorized ISUZU specialist dealer with expertise, service and advice offers you: New ISUZU NPR vehicle with ZOELLER Micro XL 7m³ waste collection body 3-year guarantee on the basic vehicle from the day of first registration or 100,000 km Standard equipment: - 5.2 liter turbo diesel with common rail direct injection 140 kW / 190 HP EURO VI OBD-D (max. torque 510 Nm at 1,500 rpm) - Particle filter system with DPD system and AdBlue (the self-cleaning system enables the filter to be cleaned without a visit to the workshop, thanks to the new DPD regeneration technology, which indicates when the function is needed. All you have to do is press the DPD button and the system cleans itself in 20 minutes) - Automated manual transmission (NEES II) with 6 gears, converter and cruise control. A built-in flow converter ensures wear-free and finely controlled starting! The gears can also be shifted sequentially manually using the selector lever. Depending on the load, the driver can use a button to preselect whether the vehicle should start in 1st or 2nd gear.) - Power steering - Leaf spring front axle (max. axle load 3,100 kg), leaf spring rear axle (max. axle load 6,000 kg) - Engine brake, cruise control - ABS with EBD and electronic traction control on the rear axle (ASR) - Electronic vehicle stability control (EVSC) system - Lane departure warning - Emergency braking assistant (AEBS) - Wheelbase 3,365 mm, traction tires 215/75 R17.5 - Spare wheel - Suspended driver's seat - Passenger double bench seat, 3-seater - Electric windows, electric adjustable and heated exterior mirrors - Electronic. Immobilizer, daytime running lights - CD radio with Bluetooth - hands-free system - Digital EG ? Control device 4.0 (GNNS) - Fog lights - Driver and passenger airbag, headrests - Height and tilt adjustable steering wheel, interior mirror - Central locking with radio remote control - Cigarette lighter, cup holder, headrests - Storage compartments in the door panels and on the roof lining Vehicle structure: Auxiliary drive / single-circuit hydraulic system complete with hydraulic pump, oil tank, lines Waste collection ? Structure type ZOELLER Micro XL 7m³ * Usable volume of 7 to 8 m³. * Structure width 2,000 mm. * Tailor-made for chassis with a permissible total weight of 7.49 or 8.5 t. * Consistent lightweight construction using high-strength materials. * 2 externally attached reinforcement profiles. * Front wall of the container closed 220 mm high. * Liquid-tight welded floor assembly * Collection container connection without intermediate frame * Low-wear guidance of the discharge shield on plastic sliding blocks. * Double-acting hydraulic telescopic cylinder for moving the discharge shield. Lsdeh Il Haepfx Aa Eohr * Recyclable material circuit with continuously adjustable valve for counterpressure adjustment of the discharge shield, adaptable to the different fractions * Ergonomic control terminal arranged in the driver's work area. * Sophisticated and reliable technology. * Enormous maneuverability. * Significantly reduced maintenance effort thanks to the standard electric central lubrication (also available as an option for the hopper). * Maintenance-friendly central electrics for high availability. * Long service life of the loading trough thanks to the manufacture from 4 mm thick, highly wear-resistant steel and side walls made of 3 mm steel. * Compaction mechanism mounted on sliding blocks. * Safety equipment in accordance with the Machinery Directive 2006/42/EC