Used Oven Used for sale (46,894)

Condition: used, Year of construction: 2018, operating hours: 8,000 h, machine/vehicle number: LC641, Used GEA Procomac Aseptic filling line 48000 BPHTechnical Specifications & Performance DataThis used bottling line is a high-performance aseptic PET solution engineered by GEA Procomac for industrial packaging and beverage production. Designed for second hand acquisition without sacrificing technical integrity, the line delivers a rated capacity of 48,000 BPH with dry aseptic technology and integrated fruit-piece dosing capability.Rated capacity: 48,000 BPHAseptic method: Dry asepticContainer format: 0.23L (two different molds)Bottle neck & cap: 38mm neck, double-layer 38mm capBlower: SIPA, 24 cavitiesFiller: GEA Procomac Fillstar FX isobaric filler, 84 valvesFruit-piece dosing: 24 valvesCapper: 24 nozzlesGas unit: None (suitable for low-acid and neutral products)Operating hours: 8000Year of manufacture: 2018Downstream speeds: Dual 24,000 BPH modules on key packaging operationsKey models/codes: Fillstar FX; outer-cap machine model NYG18H-00Advanced Automation & Control SystemsThe line integrates advanced aseptic handling and in-line quality control. Preform sterilization, cap feeding and sterilization, and H2O2 injection are automated to maintain hygienic integrity. Optical and X-ray inspection systems monitor critical control points with reject mechanisms for non-conforming containers. A dedicated aseptic water and CIP unit supports repeatable sanitation cycles and short changeover times. Automated components are engineered for consistent performance in high-speed production environments.Production Line Integration CapabilitiesConfigured as a complete production line for PET bottles, the system combines container handling, filling, labeling, secondary packaging, and palletizing. It includes a 24-cavity SIPA blower, GEA Procomac isobaric filler, fruit-piece dosing, sleeve and neck labeling, shrink wrapping, carton packing with industrial robots, accumulation buffering, and palletizing. Format flexibility includes 0.23L with two mold sets and 38mm neck finish. The modular layout supports synchronization across conveyors and buffering for continuous operation.Machine Condition & Maintenance HistoryThe line is still on power and reported in very good condition. Operating hours are approximately 8000. Manuals are available to support installation, operation, and maintenance. The equipment set is recent (predominantly 2018), with select processing assets from 2007 and 2019 included, indicating a professionally maintained and upgraded system.Operational Performance & VersatilityOptimized for low-acid and neutral product aseptic bottling, the configuration is suitable for premium beverage production requiring sterile conditions and gentle handling—especially products containing fruit pieces. Processing assets include tubular pasteurizers, UHT capability, homogenization, deaeration, and aseptic tanks, supporting robust beverage preparation workflows. Dual 24,000 BPH downstream modules help ba... Chodpfx Aps Ady Dxj Dod

Condition: used, Year of construction: 2014, machine/vehicle number: ET232, Used AXTRA labeller machine - 8.000 BPHTechnical Specifications & Performance DataThis modular automatic labeling machine is configured for glass bottles and can be adapted for PET or other container materials. Designed for beverage production and industrial packaging applications, it is ideal for integration into a used bottling line or as a second hand labeling solution within a complete production line. The machine features a carousel construction with variable speed control for flexible operation across multiple formats.Production speed: 5,000–8,000 bottles per hour (current setup at 5,000 bph, up to 8,000 bph)Carousel: pitch circle diameter 720 mm, 9 plates, clockwise rotationStations: up to 4 labeling stations can be mountedContainer shapes: cylindrical and shaped containers (subject to dimensional verification)Container diameter range: 45–115 mmContainer height range: 180–330 mmLabeling technologies available: cold glue; self-adhesive (adhesive)Self-adhesive non-stop carriages: 3 units, 400 mm reels; max label height 2 x 195 mm and 1 x 95 mmSelf-adhesive standard carriages: 3 units, 300 mm reels; max label height 95 mmCold glue stations: 2 units, fully overhauledAdvanced Automation & Control SystemsThe drive and control architecture supports precise, reliable operation for high-quality labeling on a variety of containers. The main carousel is driven by an asynchronous motor with inverter for smooth variable speed, while label application modules use stepper motors for accurate feed control.Main drive: asynchronous motor with inverter (variable speed)Label feed: electromechanical with stepper motorsVertical adjustment: electric vertical adjustment of the upper carouselOptical centering readiness: prepared for optical fiber and/or mark reader centeringNon-stop capability: self-adhesive carriages with pre-unwinder and rewinderProduction Line Integration CapabilitiesEngineered for seamless inclusion in a bottling equipment lineup, this machine can operate inline or as a standalone unit. Its modular frame accommodates different labeling methods and placements, enabling rapid adaptation to diverse production requirements common in beverage production and industrial packaging.Compatible with upstream/downstream conveyors and inspection systemsQuick exchange between cold glue and self-adhesive modulesMulti-format flexibility for cylindrical and shaped bottlesDesigned for PET and Glass bottle handlingSuitable for integration into complete packaging machinery and production linesMachine Condition & Maintenance HistoryThe core machine was used for internal testing and is essentially like new. Labeling stations have been overhauled to ensure reliability and performance.Core machine use: internal test machine; essentially... Codpfx Aj Ady D Sep Dshd

Condition: used, Year of construction: 1998, machine/vehicle number: M310, Technical Specifications & Performance Data This Rinsing-Filling-Capping Triblock by FIMER is a robust rotary monoblock engineered for glass bottle handling and precision filling. Built on the model SRT 24-24-6, it integrates a 24-clamp rinser with mobile nozzle, a 24-valve gravity/light depression filler, and a 6-head aluminum screw capper. Designed for reliable operation in beverage production and industrial packaging, it is suitable for second hand and used bottling line upgrades where consistent performance and compact footprint are priorities. Manufacturer: FIMER Model: SRT 24-24-6 Year: 1998 Rinser: 24 grippers, mobile nozzle Filler: 24 valves, gravity/light depression (slight vacuum) Capper: 6 heads, aluminum screw caps 31,5 x 18 Cap handling: Complete with cap elevator Electrical power: 6.5 kW Power supply: 380 V, 50 Hz Compressed air: Max 6 bar Construction: Rotary triblock for glass bottles Advanced Automation & Control Systems The triblock integrates coordinated rotary turrets for synchronized rinsing, filling, and capping. It is designed for straightforward operation with clear machine status visibility and quick access to critical areas for adjustments. The filler operates on gravity/light depression principles for stable liquid level control, ideal for products like vinegar in glass bottles. Electrical configuration: 380 V, 50 Hz Installed power: 6.5 kW Chjdps Ady Ecsfx Ap Djd Filling technology: Gravity/light depression for accurate, low-turbulence filling Safety systems: CE-marked with protective guarding and emergency stop circuits Changeover: Format changes supported via standard change parts Production Line Integration Capabilities This unit can be integrated into a complete used bottling line or operate as a standalone monoblock in glass bottling applications. It interfaces easily with upstream bottle conveyors and downstream inspection, labeling, and packaging machinery in beverage production and industrial packaging environments. Operation mode: Inline integration or standalone Container handling: Designed for glass bottles Cap logistics: Integrated cap elevator for continuous feeding Applications: Suitable for vinegar and similar still products Machine Condition & Maintenance History The triblock comes from a professional bottling context and is presented as a second hand solution in working condition, ready for operation. The configuration and components indicate routine industrial use with standard maintenance practices typical of glass bottling environments. Status: Ready for operation Usage: Previously used to fill vinegar into glass bottles Operational Performance & Versatility With 24 rinsing grippers and 24 filling valves, the machine provides balanced throughput, while the 6-head capper ensures consistent aluminum screw cap applicat...

Condition: used, BINDER Vacuum Drying Oven with Pump Module BINDER VD 56 + VD-M 53 Vacuum drying oven up to 220 °C with pump unit and BINDER VAP 1 vacuum pump. For sale is a used BINDER VD 56 vacuum drying oven from the year 2023, including a matching BINDER VD-M 53 pump module and BINDER VAP 1 vacuum pump. The system is suitable for the gentle drying of temperature-sensitive materials under vacuum conditions, as well as for applications in laboratories, research, development, quality control, and industrial process technology. Technical data: Manufacturer: BINDER GmbH Model: VD 56 Device type: Vacuum drying oven Year of manufacture: 2023 Article number: 9630-0002 Version: VD056-230V Made in Germany Temperature range: +9 °C above ambient temperature to +220 °C Internal volume: 55 liters Heating time to 100 °C: approx. 80 min Spatial temperature deviation at 100 °C: ± 1.2 K Temporal temperature deviation at 100 °C: ± 0.1 K Vacuum data VD 56: Leak rate: 0.01 bar/h Vacuum connection: small flange DN 16 Measuring port: small flange DN 16 Electrical data VD 56: Rated voltage: 200–230 V Mains frequency: 50 / 60 Hz Rated power: 1.4 kW Rated current according to nameplate: 6.1 A Phase: 1N~ Protection class: IP20 Dimensions VD 56 without attachments and connections: approx. 638 × 461 × 815 mm (W × D × H) Internal dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net device weight: approx. 96 kg Load capacity: Maximum load per insert: 20 kg Maximum total load: 60 kg Number of inserts standard / maximum: 1 / 5 Pump module: Manufacturer: BINDER GmbH Type: VD-M 53 Device type: Pump module for vacuum drying oven Article number: 8012-1943 Year of manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current consumption: 8.0 A Phase: 1N~ Protection class: IP20 Made in Germany Vacuum pump: Manufacturer: BINDER GmbH Type: VAP 1 Device type: Vacuum pump Article number: 5013-0217 Year of manufacture: 05/2023 Pumping speed: 2.0 / 2.2 m³/h Ultimate pressure: < 7 mbar Voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 1.6 / 1.5 A Protection class: IP40 Made in Germany Equipment: BINDER VD 56 vacuum drying oven BINDER VD-M 53 pump module / pump unit BINDER VAP 1 vacuum pump Digital controller with display of pressure and temperature Program-controlled drying monitoring Automatic ventilation at the end of the process Chjdpsz Ikx Uofx Ap Dod Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measuring port DN 16 Safety glass pane with splinter protection Large viewing window Tray insert Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions according to the images Accessories according to the images Applications: Vacuum drying Gentle material drying Laboratory and experimental technology Research and development Quality control Material testing Industrial process technology Temperature and vacuum applications Scope of delivery: 1 × BINDER VD 56 vacuum drying oven 1 × BINDER VD-M 53 pump module / pump unit 1 × BINDER VAP 1 vacuum pump Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions Accessories according to the images Scope of delivery as shown Overall dimensions including pump module: approx. 638 × 645 × 1,542 mm (W × D × H) Total weight including pump module and vacuum pump: approx. 130 kg Condition: Used Year of manufacture 2023 Optical condition according to the images Nameplates are present Scope of d

Condition: used, Year of construction: 2012, fuel type: electric, Used scissor lift for sale: Year: 2012. Working height: 10 meter Weight: 2430 kilo. Dimensions: 2,50 x 0.80 meter. Platform is 90 cm extenable. Power: elektric. Capacity: 227 kg. Codpsu Iyh Njfx Ap Djhd Price: € 5.000,-. ex VAT We have more in stock!

Condition: like new (used), Year of construction: 2001, machine/vehicle number: 3332, Baumkuchen machine with gas connection. The machine is in very good condition and includes 6 skewers and a comb. It has a speed regulator. Connection: 230 V. Cedpfed Au Tgjx Ap Dehd The machine is mounted on rollers. If you have any further questions, please do not hesitate to ask. Thank you in advance!

Condition: used, power: 27 kW (36.71 HP), input voltage: 400 V, input current: 44 A, temperature: 200 °C, inner dimension length: 1,100 mm, inner dimension width: 1,600 mm, inner dimension height: 1,500 mm, overall weight: 3,500 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber oven Vötsch VTLF 160/150/110 for solvent-containing components with monitored fresh air supply. The oven is in excellent condition. The documentation is very comprehensive and complete. Usable dimensions: 1600 x 1100 x 1500 mm (width x depth x height) Rated temperature: 200 °C Maximum permissible solvent quantity according to EN 1539 at rated temperature: 38 g Total connected load: 30 kVA Rated power: 27 kW Codpfsy U Uzxox Ap Djhd Usable volume: 2.78 m³ Steam space: 4.5 m³ Can be inspected while energized.

Condition: excellent (used), Four-sided planer WEINIG CUBE - used - Reversible knife system, electric height adjustment, lubricant pump, dust-tested, width and height display via laser, stacking system Cube Mech ----- Technical data ----- Planer width: 260 mm, Planer height: 160 mm, Number of spindles: 4, Codjz Hk Slspfx Ap Dshd Motor spindle 1: 5.5 kW, Motor spindle 2 + 3: 5.5 kW, Motor spindle 4: 5.5 kW, Feed speeds: 6-12 rpm, Extraction nozzle Ø: 250 mm Quality information: - Feed system checked - Table guides checked - All settings checked - Complete basic inspection - Complete basic cleaning - Pneumatics checked - Ready for immediate use

Condition: used, Year of construction: 2004, operating hours: 51,870 h, machine/vehicle number: LC692, Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical configuration and installed power follow the standard European TBA 19 line arrangement.The integrated straw applicator supports automated application of drinking straws to compatible 200 Slim cartons, helping prepare finished packs for downstream industrial packaging operations.Production Line Integration CapabilitiesThis second hand Tetra Pak carton filling line is suited to integration with upstream juice preparation and product supply systems, as well as downstream carton conveying, accumulation and secondary packaging equipment. It is configured as a compact filling and pack-completion solution for 200 Slim juice cartons.Machine type/categoryManufacturer/modelYearFilling MachineTetra Pak TBA 19 200 Slim V0202004Various EquipmentStraw applicatorMachines of this type typically operate as part of an aseptic carton packaging line, with conveyors and accumulation equipment coordinated to maintain a steady flow between filling and final packing stages.Machine Condition & Maintenance HistoryThe line is in operation and reported in very good condition. Recorded operating hours are 51,870. Regular Tetra Pak service has been performed at 500-hour and 2,000-hour intervals. No modifications or upgrades are reported, and spare parts are available.Operational Performance & VersatilityConfigured for juice production, this Tetra Pak filling line handles 200 Slim carton packs and incorporates straw application for consumer convenience. The format-specific configuration makes it suitable for producers seeking a used bottling line for carton-based beverage production and industrial packaging where a compact retail format is required.... Cedj Adtr Nspfx Ap Djhd

Condition: used, Year of construction: 2004, machine/vehicle number: LC637, Used Sidel-Krones PET bottling line 18000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for PET bottle handling and optimized for still water applications. Built with premium components from Sidel, Krones, AROL, SMI, Twinpack, ACMI, TOSA, ., and Videojet, it delivers consistent performance at industrial scale. The line operates at a production capacity of 18,000 bph and is configured for the most common market formats.Production speed: 18,000 bph 2L, 23.000 BPH 0,5L Container types: PET bottlesBottle formats: Compatible with 0.5L and 2.0L bottle formatsPrimary components: Sidel SBO 16 Series 2 blow molder (16 molds), Sidel ALSIM gravity filler (63 valves), AROL capping system (pre-threaded plastic caps), Krones CONTIROLL roll-fed labeler (1 station, 16 bottle plates), SMI SK452 F shrink wrapper, Twinpack MHTE handle applicator, ACMI PASAR P130 2L layer palletizer, TOSA 125 + 475 ring pallet wrapper, . R 13/2 preform tipper, Videojet 3210 laser coderAir recovery: Integrated with blow molderChiller: Not includedTooling: Blow molds not includedBuild years (components): 2000–2024Advanced Automation & Control SystemsThe line integrates modern automation features across critical stations to ensure stable performance and high-quality output in beverage production. The Krones CONTIROLL labeler features electric head adjustment for precise label placement, while the capping system by AROL uses a pick & place distribution to ensure reliable application of pre-threaded plastic caps. The Sidel ALSIM filler operates within a pressurized cabin equipped with filters to support hygienic filling conditions.The Sidel blow molder includes an air recovery system to optimize compressed air utilization. Operator interfaces across the equipment provide intuitive adjustment and monitoring, supporting quick startups, changeovers, and routine operations in high-throughput environments typical of industrial packaging.Production Line Integration CapabilitiesThis second hand used bottling line is designed for seamless integration from preform handling to end-of-line palletizing. The . preform tipper, hopper, elevator, and preform infeed supply the Sidel SBO 16 Series 2 rotary blow molder. Downstream, the gravity filler and AROL capping machine form a robust monobloc for consistent filling and closure application. The Krones CONTIROLL labeler applies plastic wrap-around labels via a roll-fed station, supported by a Videojet 3210 laser coder for high-contrast coding. Secondary and end-of-line packaging are handled by the SMI shrink wrapper, Twinpack handle applicator, ACMI layer palletizer, and TOSA ring wrapper.Inline configuration from preform tipping through palletizingFormat change capabilities for 0.5L and 2.0L PET bottlesSuitable for water production with PET containersMachine Condition & Maintenance HistoryThis used bottling line is presented in working condition with components manufactured between 2000 and 2024, including a recent 2024 Videojet coder for coding in... Chodpfez E Dk Eox Ap Djd

Condition: used, Year of construction: 2008, machine/vehicle number: AT88, Used Tetra Pak Sterilizer + Homogenizer 12000 l/hThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h processes liquid food products through thermal treatment and homogenization, ensuring high safety and quality standards in industrial production. Since it combines a UHT sterilization system with a high-pressure homogenizer, it delivers optimal processing for various food and beverage applications. Moreover, its design allows easy integration into existing production lines, making it a practical choice for manufacturers.General FeaturesThis system operates at a capacity of 12,000 liters per hour (l/h), providing both high performance and consistent results in thermal treatment and particle size reduction. Tetra Pak, a leading brand in food processing technology, manufactured this unit in 2008, ensuring a balance between proven reliability and advanced engineering. Furthermore, the system’s robust construction guarantees long-term durability, reducing the need for frequent maintenance.Tetra Pak Steritube UHT SterilizerThe Tetra Pak Steritube UHT sterilization unit applies high temperatures to ensure the microbiological stability of liquid products. Because it features a controlled heating system, it keeps the sterilization temperature between 95°C and 138°C, depending on production requirements. In addition, operators can adjust the holding time at multiple levels, choosing between 5, 10, 15 seconds for initial stages and 30, 45, 60 seconds for advanced stages, allowing precise thermal treatment control.To optimize heat transfer, the system regulates hot water flow between 10,500 and 32,000 l/h, ensuring uniform sterilization. As a result, the unit maintains an inlet temperature of 5°C and an outlet temperature between 85°C and 95°C, which provides controlled cooling before further processing. Another key advantage is that its design allows seamless integration with homogenization systems, CIP (Cleaning-in-Place) units, and aseptic packaging lines.Tetra Pak Alex 30 HomogenizerThe Tetra Pak Alex 30 homogenizer operates at pressures up to 250 bar, effectively reducing particle size and improving product stability. Because it processes between 6,000 and 14,000 l/h, it is ideal for enhancing the consistency and quality of UHT-treated liquid products.Additionally, the system features cone valves and pistons made of stainless steel or solid ceramic, ensuring durability and resistance to wear. It also includes grooved and V-type seals, which provide effective sealing and reduce maintenance needs. Since the homogenization process occurs in two stages, the system ensures maximum efficiency. The first stage applies 42% of the pressure, while the second stage handles the remaining 58%, both controlled electronically via VDC signals.Moreover, an ABB M3BP315SMB 4 motor powers the unit with 132 kW output, operating at 380V and 50 Hz, which guarantees reliability and high performance. At the same time, a 7.5V DC thermistor monitors the operating temperature to prevent potential malfunctions. For enhanced safety, the system includes a 24V DC door safety lock and a crankshaft speed sensor to prevent overloads.ConclusionThe Used Tetra Pak Sterilizer + Homogenizer 12000 l/h offers an efficient solution for thermal processing and homogenization of liquid food products. Thanks to its high performance and reliable construction, manufacturers can optimize their... Csdpfx Apov Di Itj Dshd

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Chjds Adtqlepfx Ap Djd

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: LC676, Used Tetra Pak TBA 19 200ML Slim Filling lineTechnical Specifications & Performance DataThis used bottling line is built around a Tetra Pak TBA 19 V10 filling machine for 200 ml Slim carton formats. Designed for dairy product processing, the line provides an integrated solution for filling, straw application, secondary packaging and product conveying in an industrial packaging environment.Filling machine: Tetra Pak TBA 19 V10Container format: 200 ml Slim Tetra Brik cartonProduct application: dairy productsYear of manufacture: approximately 1996Running hours: approximately 26,000 hoursConveyor system: approximately 30 meters, including 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsThe line combines dedicated filling and packaging equipment into a coordinated production arrangement. Its conveyor system supports the controlled transfer of individual cartons between the filling, straw application and packaging stages. Chain tensioners are included to help maintain reliable conveyor operation and product flow through the line.Machines of this type are typically operated through the individual controls of the filler and downstream packaging modules, allowing operators to manage the principal filling and handling stages from the relevant equipment stations.Production Line Integration CapabilitiesThis complete carton bottling line is configured for the 200 ml Slim format and includes filling, straw application, tray packing, tray shrink wrapping and conveying equipment. It is suitable for integration into dairy beverage production operations requiring a compact line layout for Tetra Brik cartons.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 19 V101996Various Equipment - Straw ApplicatorTetra Pak TSA 211996Various Equipment - ConveyorsTetra Pak1996Case PackerTetra Pak TCBP 70 Multiinfeed1996Shrink WrapperTetra Pak TTS 511996The Tetra Pak TCBP 70 Multiinfeed tray packer is compatible with, or can be configured as an option for, wrap-around packaging. The Tetra Pak TTS 51 tray shrink wrapper completes the secondary packaging process after tray packing.Machine Condition & Maintenance HistoryThe second hand bottling line has been workshop checked, fully tested and... Cjdsz E Dgaepfx Ap Dohd

Condition: used, Year of construction: 2012, This MIWE Thermo Express rack oven system consists of 2 ovens, each with 9 racks, thus offering excellent capacity for medium-sized bakeries. The ovens are heated with thermal oil, which provides excellent baking quality that is unparalleled. The ovens also have an automatic loading and unloading system, making baking a breeze. consisting of: Chjdps Ahwvbefx Ap Dsd 2x MIWE Thermo Express rack ovens 9 racks per oven Total baking area: 68.4 m² MIWE Athlet B330S automatic loading and unloading system Including exhaust system at the loader Central control unit Heating boiler central unit HKZ350

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Wiesheu EBO 60x80 Combi Oven Year 2017 Csdpop Sr N Rofx Ap Dohd - Euromat 64 L 2600-A-FBBBCBAA - Ebo 68 M X1625-A-BBADA

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2500-A-BBBBCAAA, Wiesheu combi oven; - Euromat 64 S Backofen 2500-A-BBBBCAAA Chsdpfxet R Tgpo Ap Ded - Ebo 68 M Backofen X1625-A-BBDDA In very clean condition. Everything works properly. Please contact for more information.

Condition: used, Year of construction: 2009, machine/vehicle number: SCIAC45, Used Rinsing Machine Kompass SK481 8000 bph Used Rinsing Machine Kompass SK481 8000 bphGeneral Features of the Used Rinsing Machine Kompass SK481 8000 bph The Used Rinsing Machine Kompass SK481 8000 bph rinses bottles with a diameter of 45 mm and delivers a nominal output of 8000 bottles per hour. Kompass manufactured this machine in 2009 to serve medium-speed bottling lines. In particular, the SK 481 model offers a compact, efficient solution for plants that prioritize line compatibility and consistent performance. As a result, it suits both new installations and retrofitting projects.This unit is configured to work specifically with 0.1275-liter PET bottles, making it ideal for producers handling small-format plastic containers. Operation and Mechanical Configuration of this used rinsing machine Chsdeyhbwropfx Ap Dsd This rinsing unit rotates counterclockwise, while bottles enter from right to left. Therefore, the machine aligns easily with conventional conveyor systems. Moreover, the mechanical assembly includes 32 grippers that firmly secure each bottle during the rinsing phase. The Used Rinsing Machine Kompass SK481 8000 bph performs a single rinsing treatment using fixed nozzles and water as the washing medium. Consequently, it ensures minimal complexity in maintenance and operation. Processable Products and Application Versatility The Used Rinsing Machine Kompass SK481 8000 bph handles various products, including alcoholic beverages, juices, syrups, oils, soft drinks, spirits, wine, and water. Thanks to this broad compatibility, the machine supports production lines that frequently change product types. In addition, operators can use it across multiple beverage categories without major mechanical adjustments. Furthermore, the consistent treatment method ensures uniform results regardless of the processed liquid.Its adaptation to 0.1275 L PET bottles ensures compatibility with compact beverage formats, commonly used in specific product lines or promotional packaging. Electrical and Dimensional Specifications of this used rinsing machine The machine operates at 415 Volts, with a frequency of 50 Hz, and consumes 3.0 kW of electrical power. These parameters match industry-standard infrastructure. Additionally, the machine’s footprint — 1850 mm long, 2250 mm wide, and 2100 mm high — fits comfortably within most medium-sized bottling halls. Therefore, engineers can plan the layout with minimal disruption. Likewise, these dimensions support integration with adjacent modules in the line. Automation and Control System

Year of construction: 2011, condition: good (used), Polin Forno Wind4060 Oven Chsdpsnxlrdefx Ap Djd Serial: 1104034 2011, stainless, electric oven, 10 trays with cooling rack underneath, adjustable temp and timer controls, 3Ph

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, 12 months warranty, in-stock item, new unit -Model on wheels -Maximum temperature: 300 °C -Oven chamber volume: 1050 liters -External dimensions: 1470 x 970 x 1920 mm (W x D x H) -Oven chamber dimensions: 1200 x 670 x 1400 mm (W x D x H) -Controller B510 (5 programs, each with 4 steps), also available with C550 (10 programs, each with 20 segments) -Horizontal, forced air circulation results in a temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with closed exhaust flap) -Permissible batch weight: 250 kg with distributed load -Load per grid shelf: 30 kg with distributed load -Reinforced floors and rails for 80 kg distributed load available upon request -Grid shelves included: 4 pcs Chsdpeiqkr Ijfx Ap Dod -Maximum number of grid shelves: 14 pcs, available for short-term delivery -Connection power: max. 9.3 kW -Fan capacity: approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Weight: 450 kg -Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg The oven is not to be used for materials containing solvents or for heating food, animals, wood, grain, etc. Oven, industrial oven, heating cabinet, heating oven, laboratory oven, drying oven, temperature oven, testing cabinet

Condition: used, 4-way combi Holzprofi K5-32-2.0, year of manufacture 2012, good condition, 320 mm planing width, 3x3 kW, 315 mm saw blade, 2200 mm cutting length, 102 mm cutting height, 2000 mm format table length, 3 knives, 850 kg Cedpfxsvrvitj Ap Dehd Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Double edger TRAK-MET PTF2-4, year of manufacture 2022, as new, feed rate 0.40 m/min, incl. laser, 15 kW, 2 knives, 1150 kg Prices subject to change, errors, printing and typesetting errors reserved Cedpfx Apovr I H Ds Dshd

Condition: good (used), Year of construction: 2009, pressure: 24 bar, steam boiler 20.000 kg x 24 bar used type: Loos Chjdpjr Ezblefx Ap Dsd year of construction: 2009 capacity: 20.000 kg / h max. working pressure: 24 bar with Saacke burner for natural gas with Economizer with feed water tank available immediately - additional equipment like chimney on demand

Condition: used, machine/vehicle number: G-ME125419aP, Metal band saw Optimum S130GH, 0.25 kW, 78 kg Prices subject to change, errors, printing and typesetting errors reserved Cedjvw Edkopfx Ap Djhd

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Chodpfsvrvlujx Ap Djd Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: K110175200, functionality: fully functional, For the heat treatment of small parts. Each drawer can be loaded independently. 12 months warranty, available from 12/2026. -Nominal temperature Tmax 150°C -2 ovens, each with 5 drawers, not available individually as they share a control system! -Drawers extend via telescopic slides -Drawers locked individually via quick-release mechanism -Usable space per oven: height 1200 mm x width 600 mm x depth 1000 mm -Drawer space per oven: height 240 mm x width 120 mm x depth 200 mm -Heat transfer via flowing hot air (convection) -Airflow horizontal -Air circulation via radial fan Ceds Aa Aivspfx Ap Dehd -Temperature controller Eurotherm 3508 -Thyristor switch -Safety limiter JUMO -Heating power per oven 17.4 kW -Documentation, CE declaration of conformity Inspection in our warehouse possible upon request! Oven, furnaces, drying oven, industrial oven, drying cabinet, heating oven, heat treatment cabinet, convection oven, drawer cabinet, drawer oven, heating oven, chamber convection oven, annealing oven, tempering oven, annealing furnace