5-axis CNC milling machine with 24 tools

COSMEC 5-Achsen CNC-Fräse CONQUEST 515

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes Gjdpfsxg El Aox Alcsui In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: excellent (used), Year of construction: 2007, Print counter (m): ca. 70 Power: max. 15.000 sheets/hour Gujdpfx Alez N Egkscei Format (mm): Max. Paper Size: 750 x 600 mm // Min. Paper Size: 280 x 200 mm Max. Printing Area: 745 x 545 mm Printing: 5/0 or switchable 2/3 Paper Thickness: 0,04 – 0,6 mm Dampening preparation: Filmfeuchtwerk RYOBI matic New ink application rollers

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Gujdpfx Ajy R Dtcjlcsi

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai Gusdowwq Hcopfx Alcji X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 160 t, Hydraulic 160 T double cylinder insertion press Double column press- two cylinder press with 160 T capacity at 250 bar. a) idle speed downward 9,8 mm/sec. b) upward speed up to 15,0 mm/sec. c) table size 1500x600x100 mm, height adjustable d) ram plate, 1500x600x100 mm e) year of construction 12/2020 f) motor power 11 KW g) pump capacity 22 L/minute Gedpfx Asgz H Dhjlceui h) travel limitation by cam switch i) Open height 700 mm j) ram travel 500 mm k) Remote control via two-hand operation l) Pressure setting via rotary control from approx. 30 to 160 T m) Approx. height 2800 mm n) T-slots according to customer requirements o) Weight approx. 4,200 kg p) Oil tank with approx. 200 L volume q) Painting in RAL 5005 ( royal blue ) or according to customer's request. r) For safety reasons the ram plate is painted orange RAL 2009 or signal yellow RAL 1023 s) Assembly, commissioning, instruction can be provided at a separate charge. The travel can be adjusted by cam switches. The ram/table size of the machine shown is 1600x600x100 mm.

Condition: as good as new (ex-display), Year of construction: 2026, CNC machining centers Rover Multi Up M C S - exhibition model - Work area *: X = 3280 mm; Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece passage *: Y = 1900 mm Axis travels *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 work areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM - 2 areas It enables the clamping of workpieces by means of vacuum templates. Remote control RM850 Rover Multi Up M C S Panel - Multi Purpose Regular Configuration 2 Godsy Ehrxepfx Alcsui Compatible with the revolving tool magazine with 16 slots and the side tool magazine with 12 slots. The tool magazines can also be retrofitted. Uninterruptible power supply (UPS) for the machine PC. 6 ATS workpiece supports - 18 module carriers — 6 aluminum workpiece supports. The guidance of the workpiece supports is on linear guides with ball circulation slide blocks. The clamping is done on the front and rear linear guide by means of pneumatic cylinders. The clamping is released by a push button, which is attached to the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated by 15° on the module carriers; an ideal solution for molded parts. — 18 closures for the module carriers without template. Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction of travel indicator and position indicator. — Sensors on each work table and along the X axis of the work area. — Display of the direction and position reached for the carriage in the positioning phase, mounted on each work table The system, according to the programming of the work tables, suggests the direction of movement of each work table and carriage to the operator and indicates the position reached with a green LED and a beep, with an error of +/- 1.5 mm. Division of the pneumatic system into 2 work areas in X. Machining unit with 5 interpolating axes 13 kWp (17.4 PS), with HSK F63 adapter, liquid-cooled - 20,000 RPM. Extraction hood with 12 NC-controlled positions for the electrospindle with 5 axes. Flange for the preparation of a machining unit with 5 interpolating axes for the mounting of aggregates. Coolant system Additional Z-axis support for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 slots in the machine bed. Revolving tool magazine with 16 slots, installed directly on the machining unit X. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on a 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of the standard PC with a powerful PC. Digital devices for measuring tool length with diameter up to 130 mm. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter Suction proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: in stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Gjdpfx Asx Adn Uolcoui Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Gsdozz Afiopfx Alcoui Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: new, Year of construction: 2026, Size: 4 Nominal heat output: 116 kW Godpfxedlhcds Alcsui -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with refractory bricks Suitable for rooms of: 2,900 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 30 - 35 kg/h Forced air supply, free-blowing: 7,500 m³/h Exhaust outlet: Ø 600 mm Flue gas connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 volts

Condition: excellent (used), functionality: fully functional, Working area: 4840 mm x 1500 mm Electrospindle: 12 kW, ISO 30 Automatic tool changer: 8 positions Guodpfxjyinp No Alcji Blade diameter: 250 mm Pendulum machining Number of vacuum pumps: 2, capacity: 300 m³/h