Used Okuma Mx 45 for sale (230)

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm Bedpfxoyy Upao Akajlg – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: used, Okuma LB400 Bjdpoy Apq Rsfx Akajlg

Condition: good (used), Parts shown by hand not come. Bsdpfx Aksyb R Ereaelg

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor Bledpfjv S Svvjx Akaog - coolant tank - immediately available

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar - Year of manufacture: 2006 Bjdpfx Ajv S Su Sjkaolg

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Bledjyn Em Rjpfx Akasg Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Turning length 1500 mm Kuka robot 140 kg without handling attachment Blsdpfx Asyrf T Sekaog 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Bjdpfx Akeywicvsaelg

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle Blodpsyrf I Aefx Akasg 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Blsdpsyux S Hofx Akaeg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Blodpjxzgkijfx Akaog Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Bedjxzi D Sspfx Akaslg Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Bsdpfx Aexwy S Ejkaolg Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 1,000 mm, turning diameter: 630 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, Technical specifications for Okuma Multus B300-W with Y-axis and bar loader Year of manufacture: 2010 Machine configuration: • Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) • Tool spindle: 10,000 rpm with HSK-A63 • Air blast through spindle center • Tool magazine: 60 stations • Workpiece catcher • Renishaw 3D probe RMP60 including preparation for in-process measuring • Swarf conveyor: hinge belt Interlit • High-pressure pump: Brinkmann TM26/180 • Preparation for oil mist extraction • Short bar loader: SAMSYS Multi-3000LR 1240/65 Main spindle: • BigBore with A8 spindle nose – speed: 38-3,800 rpm • A8 add-on kit for through-hole clamping for max. 65 mm bar diameter Bsdpfjyiayxex Akaslg • SMW collet chuck, axial draw – Hainbuch Spanntop system Counter spindle: • Max. speed: 5,000 rpm with A6 spindle nose • A6 add-on kit for through-hole clamping • Workpiece ejector for counter spindle, Ø 52 mm Working area: • Maximum turning diameter: Ø 630 mm • Swing diameter over cross section/bed: Ø 630 mm • X-axis travel: 580 mm – rapid traverse 40 m/min • Z-axis travel: 935 mm – rapid traverse 40 m/min • Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min • W-axis travel: 1,000 mm – rapid traverse 20 m/min • B-axis is incremental, 0.001 degree Weight: approx. 10,300 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156592, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 171, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X/Y/Z: 1,000 x 900 x 1,000 mm Pallet size: 630 x 630 mm Number of pallets: 2 Max. workpiece size: 1,000 mm diameter x 1,000 mm height Bjdpfxjwu Epaj Akaolg Max. workpiece weight: 1,200 kg Spindle power: 40 HP Spindle speed: 6,000 rpm Tool magazine: 171 positions Spindle taper: DIN50 EQUIPMENT - Coolant supply through spindle - Chip conveyor

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Bsdeyvy Utspfx Akaelg Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from production facilities that were in operation until they were decommissioned. Bedpfxsyn R S Ee Akaelg Condition: used (functional)

Condition: used, Year of construction: 1980, Machining center Bjdpfx Aksyycv Ieaslg

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LU 3000 EX-M 2ST-600 Control: OSP-P300L Year of manufacture: 2017 Internal machine no.: 28 Turning length: 600 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Spindle speed: 50 – 5,000 rpm 2 tool turrets A turret: 12 tool stations (all driven) B turret: 8 tool stations Equipment / Accessories: Chip conveyor One Touch IGF Bledpfeym Rp Isx Akajg Tool monitoring system Tool measurement device Reinforced coolant pump 8 bar 3-jaw chuck Kitagawa B208

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Bledpfx Akoyalp Nsasg Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. • Control: OSP P 300LA Bljdpfx Akjyq Ngmeasg • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min • Tool presetting: Manual • Programming: Conversational IGF

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 Bljdpfxeyaiq Do Akaeg • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: OKUMA, spindle speed (max.): 8,000 rpm, number of axes: 4, This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2008. It offers robust construction and precision for demanding machining tasks. If you are looking to get high-quality milling capabilities, consider the Okuma MA-400HA machine we have for sale. Contact us for more information. Additional equipment • Tool change gearbox has a defect Bljdpfox U Trvsx Akasg Machine Benefits Technical Machine Benefits • Pallet size: 400x400 mm / 2 pallets • B-axis rotary table (indexable)The following repairs were made: 12/2022 – replacement of the control unit (U2319 – Replacement of the ATC gearbox 05/2022 – Replacement of the X-axis telescopic cover (H1090-0025-98-2) Replacement of small parts took place regularly (hoses, sensors, bulbs, etc.). The condition of the spindle is fine, without major damage. Until the last moment, the machine produced accurately and within tolerance. Regarding the non-functional tool change gearbox – there is increased clearance in the gearbox, so when changing the tool, when entering the spindle, it is not in the optimal spindle axis. The bearing/cam/ is probably damaged in the gearbox. Service work is performed by an authorized service for OKUMA machines.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,000 mm, total height: 3,280 mm, overall weight: 24,000 kg, spindle speed (max.): 12,000 rpm, tool weight: 25,000 g, number of axes: 4, This 4-axis Okuma MA 600 HB was manufactured in 2011, featuring a robust horizontal machining center design. It boasts X, Y, and Z axis travels of 1,000 mm, 900 mm, and 1,000 mm respectively, and a maximum spindle speed of 12,000 rpm. The machine includes a high-capacity 150-tool chain magazine with rapid tool change times. Consider the opportunity to buy this Okuma MA 600 HB horizontal machining center. Contact us for more information about this machine. • Spindle center to table surface: 50 to 950 mm • Spindle nose to pallet center: 70 to 1,070 mm Bedpfx Aex D Hzyjkaslg • Table / Pallet • Max rotation dimensions: 1,000 × 1,000 mm • Continuous table positions: 360,000 • Pallet change time: 7 sec • Pallet type: MAS perforated • Cooling through spindle: 20 bar • Compressed air pressure: 46 bar • Feed • Cutting feedrate: 60,000 mm/min • Positioning accuracy X-Y-Z: 0.004 mm • Repeatability X-Y-Z: mm • Tooling / Magazine • Tool change time (tool/tool): 1.9 sec • Tool change time (chip/chip): 4.4 sec • Tool selection: random • Max tool diameter (non-adjacent): 240 mm • Floor space: 3.38 × 6.11 m • Installed power: 50 kVA • Machine features • Work area shower wash system: Yes • Presetting at table edge: Yes • Provision for probe / zero offset: Yes Additional equipment • Chip conveyor: Mayfran Dimensions Machine Depth 3380 mm

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, total height: 2,864 mm, overall weight: 11,500 kg, spindle speed (max.): 15,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50–810 mm • Spindle nose to pallet center: 135–895 mm • Table/pallet: 500 × 500 mm; max load 500 kg; indexing 1° • Workpiece capacity: max Ø800 × 1,000 mm • cutting feed 1–60,000 mm/min; table indexing motor 3.0 kW • Tooling: tool shank MAS403/BT40; pull stud MAS 2; magazine 64 tools; random selection Bledpfxsx D Rrco Akaeg • floor space 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Provision for Renishaw probe • Shower/washdown system