Used Okuma Ma 60 Hb for sale (222)

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 1,000 mm, turning diameter: 630 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, Technical specifications for Okuma Multus B300-W with Y-axis and bar loader Year of manufacture: 2010 Machine configuration: • Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) • Tool spindle: 10,000 rpm with HSK-A63 • Air blast through spindle center • Tool magazine: 60 stations • Workpiece catcher • Renishaw 3D probe RMP60 including preparation for in-process measuring • Swarf conveyor: hinge belt Interlit • High-pressure pump: Brinkmann TM26/180 • Preparation for oil mist extraction • Short bar loader: SAMSYS Multi-3000LR 1240/65 Main spindle: • BigBore with A8 spindle nose – speed: 38-3,800 rpm • A8 add-on kit for through-hole clamping for max. 65 mm bar diameter • SMW collet chuck, axial draw – Hainbuch Spanntop system Bljdpfxsyiayxo Aa Usd Counter spindle: • Max. speed: 5,000 rpm with A6 spindle nose • A6 add-on kit for through-hole clamping • Workpiece ejector for counter spindle, Ø 52 mm Working area: • Maximum turning diameter: Ø 630 mm • Swing diameter over cross section/bed: Ø 630 mm • X-axis travel: 580 mm – rapid traverse 40 m/min • Z-axis travel: 935 mm – rapid traverse 40 m/min • Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min • W-axis travel: 1,000 mm – rapid traverse 20 m/min • B-axis is incremental, 0.001 degree Weight: approx. 10,300 kg

Condition: good (used), CNC control, control panel, machining center -Removed from a: CNC lathe, manufacturer: Okuma, type: LB15 Bsdpfxedtcrkj Aa Ujld -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 01224, turning length: 750 mm, turning diameter over cross slide: 520 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, chuck outer diameter: 250 mm, We are offering this used OKUMA HOWA ACT 4 CNC turning and milling centre, year of manufacture 1985. Bodpfxeycg Tze Aa Usld Manufacturer: OKUMA HOWA Model: ACT 4 Year of manufacture: 1985 Condition: used Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling centre CNC control: Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm 12-position turret Spindle speeds: 20 - 3500 rpm Chuck incl. hard and soft jaws Tailstock Incl. various tool holders New monitor: flat screen Machine under power. Data sheet, documentation and manuals available Data transfer possible via laptop

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Bledpex I Nbtjfx Aa Ued Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment valued at €20,000–24,000. * 4-axis machine. * Fully independent programmable tailstock with movement on the Z axis and clamping by M codes. * 12-station turret, all positions powered. * C axis. * Y axis. * Integrated main spindle motor: 18.5 / 22 kW. * Driven tool motor: 5.5 kW. * Motor starting torque: 620 Nm. * Integrated, beltless main spindle drive. * Main spindle nose size: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Box guideways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Maximum swing diameter: 520 mm. * Maximum machining diameter: 380 mm. * Maximum machining length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption display. * Parametric automatic anti-collision system for tools. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min in X and Z axes. * Turret indexing time: 0.2 seconds. * Renishaw automatic tool setting arm. Bjdpsyl Tmajfx Aa Ujld * Communication ports: USB, PCMCIA card, and RS-232. * Dual pedal for main chuck and tailstock open/close. * Side-mounted chip conveyor, hinge-type. * Complete set of external and internal static toolholders. * Full set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operating manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate availability unless already sold.

Condition: good (used), Year of construction: 1996, Control: OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Bedpfx Aox Tvgasa Ujld Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50

Year of construction: 2006, condition: ready for operation (used), Control Unit Bedpfx Aasx D Nf Is Usld Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Bledexmirgepfx Aa Ued Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Bledpfx Aajx I Axre Uod Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places Bodpjrfw Nhefx Aa Ujld chip conveyor

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Bledpsi Ecarsfx Aa Ued

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Bljdpfx Aoi Ecacsa Uod

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Bljdei Ecagjpfx Aa Ujd

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Bljdpfxot Izafs Aa Uod

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, First installation in 2023 Controller OPS-P300LA control system Swing diameter: 450 mm Center distance: 500 mm Max. turning diameter: 230 mm X-axis: 165 mm Z-axis: 470 mm Number of turrets: 1 Turret design: V12 Tool positions: 12 Driven tools: none Max. cutter cross-section: 25 x 25 mm Max. drill diameter: 32 mm Speed ​​range: 45–5000 rpm Spindle bore diameter: 62 mm Bjdpfx Aexpfn Asa Uold Tailstock: yes Parts catcher: yes Prepared for bar feeder magazine: yes The machine is barely used and available for immediate purchase. Live in Hungary.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Tool holder type MAS BT40 ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Bsdpfeuu Rwysx Aa Ujld Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit Bljdpfjvmzc Ujx Aa Usd - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Bedpfjwu I Irox Aa Uold Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: ready for operation (used), functionality: fully functional, MACHINE IN STOCK – READY FOR IMMEDIATE DELIVERY Blodpfxsygx Ske Aa Ued

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, number of slots in tool magazine: 36, table length: 2,200 mm, table width: 850 mm, controller model: OKUMA-OSP-HMI, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, number of spindles: 36, rapid traverse Z-axis: 16 m/min, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, spindle nose: BT 50, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, table load: 2,500 kg, tool diameter: 120 mm, tool length: 400 mm, tool weight: 20 g, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Bodpfxeu Dinke Aa Uold

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine Bjdetqu U Tspfx Aa Uold

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Bljdpfx Aaoi D Naas Ued

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. Blodoxr Diwopfx Aa Ued For CNC lathe OKUMA&HOWA 2SP

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm Bedpexwp Ebjfx Aa Ueld centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Bjdpou U E Avjfx Aa Ueld Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg