Used Okuma Ls for sale (185)

Condition: used, Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, machine/vehicle number: W6212-T63-280, We have an Okuma Genos CNC lathe for sale, fully operational and immediately ready for work. The machine is in excellent working order, regularly maintained and serviced. - Main spindle and sub-spindle Kodpfxew Np S Hs Ag Uedg - Tool probe - Parts catcher Spindle speed: 3,800 rpm Technical condition: Good. The machine was purchased new for our facility in 2017 and commissioned in the first quarter of 2018. The lathe is connected to power and currently in operation. It is possible to inspect and test the machine under working conditions at our site. The decision to sell is due to changes in our projects. Optionally, an LNS bar feeder is available for €10,000 and an oil mist separator for €1,500 (both visible in the photos).

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: 20,000–24,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in Z-axis movement and locking via M codes. * 12-station turret, all stations live (motorized). * C-axis. * Y-axis. * Main spindle with built-in motor, 18.5 / 22 kW. * Motor for driven tools: 5.5 kW. Kodsyaxmbopfx Ag Ujdg * Spindle start-up torque: 620 N·m. * Integrated motor, direct drive without belts or gear steps. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Hardened box ways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Max turned diameter: 380 mm. * Max turning length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on X and Z axes. * Turret index time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports: USB, PCMCIA card, and RS 232. * Dual pedal for main chuck and tailstock open/close. * Side chip conveyor, hinged type. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery subject to prior sale.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Okuma Macturn 30 1SW 1000, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 bar, gear milling option, approx. 12,500 spindle hours, HS Big Bore, GS Standard Bore Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Kdsdpfxovta Rkj Ag Ueg Bjsvkhv0lno We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Ksdpfxjvta Sbj Ag Usdg Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 11,500 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Kjdpfx Ajwcd Evjg Uedg Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 10,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 11,500kg

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 5400 mm Measurements depth 10500 mm Machine weight 27000 kg Main Drive Spindle speed range 6000 rpm Kdjdpox D Iw Nsfx Ag Uog This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, Control Unit Brand OKUMA Model OSP-P300SA Main Drive Spindle speed range 38-3800 Tool taper HSK 63 Number of axis 4 Kdedpfx Agex D Hlls Ueg Movement Y-Axis Movement 160 mm B-Axis Movement 0.001° Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment HI-Cut Pro high-speed control This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Main Drive Kdsdox D Dqxjpfx Ag Ujg Number of axis 2 This Okuma LVT 300 was manufactured in 2005. It features a stable, precise design with recent upgrades including a new SMW clamping cylinder and chuck in 2020, and a completely overhauled Z-axis with new guideways and spindle. Additional features include an EWAB conveyor for automated parts logistics and extensive tool holders. Consider the opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1999, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1050 mm Z-Axis Movement 460 mm Y-Axis Movement 560 mm Tools Type of tool holder BT50 Kdodpfsx D Htcjx Ag Ujg This 3-axis Okuma MX-55VB was manufactured in 1999. It features BT50 tool holders and a tool measuring system. The machine has an X-axis travel of 1050 mm, Y-axis of 560 mm, and Z-axis of 460 mm. Complete documentation is available. If you are looking to get high-quality milling capabilities, consider the Okuma MX-55VB machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires! Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse, 380v available), we can ask Okuma to make a test report if required. Free loading on truck. Transport can also be arranged in the EU. As new condition, 930 hours on spindle, new 300.000 euro's, so a 125.000 saving on an as-new machine with Kdodpewzzrksfx Ag Ujg

Condition: used, Year of construction: 2000, x-travel 560 mm y-travel 560 mm z-travel 625 mm control OSP-U100M Fanuc spindle speeds 15000 U/min spindle drive 15/11 kW rapid travel x/y/z 30 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm table load 0,4 t Kdsdpfx Agoxyacco Ueg table index 1 ° total power requirement 49 kVA weight of the machine ca. 11 t dimensions of the machine ca. 3,2 x 2 x 2,5 m Control OSP-U100M (Fanuc), 60 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: excellent (used), Year of construction: 2004, CNC Control: FANUC 15i-MB X mm: 1.020 Y mm: 1.020 Z mm: 1.020 B mm: - A degrees: - Number of pallets: 2 Table dimension mm: 630 x 630 Table load capacity kg: - Cutting feed rate mm / min X,Y,Z: - Max. rapid traverse m / min X, Y, Z: - Spindle speed rpm: 10.000 Spindle power kW: 22 / 18,5 Cone type: BT-50 Torque Nm: - Type of loader: Chain Magazine positions: 80 Max. tool diameter mm: - Max. tool dia. Tool dia. with empty adjacent positions: - Max. tool length mm: - Max. tool dia. Max. tool length mm: - Max. tool weight kg: - Capacity of coolant tank l.: - Cooling through the spindle bar: - Yes Kdodpfx Aeuftileg Ueg EQUIPMENT Chip extractor APC with 2 stations Cooling through the spindle Electronic handwheel control. Dimensions Length mm: Width mm: Height mm: Weight Kg: 22.000

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Ksdex Ed A Djpfx Ag Uodg Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 2007, x-travel 762 mm y-travel 460 mm z-travel 460 mm Control OSP-P200M Speed range 50-15,000 rpm Rapid traverse X-axis 40 m Rapid traverse Y-axis 40 m Rapid traverse Z-axis 32 m Main drive motor 22 kW Machine weight approx. 7200 kg Space requirement approx. 2850x2810x2750 mm Accessories/equipment: - Tool magazine 32 tools - Chip conveyor - Internal coolant supply - Standard filter system Kodpfxovq Rhzs Ag Ujdg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! Kjdpjx Hx Dnsfx Ag Uedg TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Kdjdpfx Agjx D S Eke Uog Application Types Milling

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, controller model: P200M, Equipment: chip conveyor, Transport, installation, commissioning – we deliver your machine ready for operation (optional) Machine type: Horizontal machining center Manufacturer: OKUMA Model: MA-400HA Year of manufacture: 2008 Control: OSP P200M Kodpfx Agox Exw Se Usdg Country of origin: Japan Delivery time: Short notice by arrangement >> 4-axis machining center High productivity Including various accessories

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm Ksdpfx Aevmzc Uog Uedg X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Condition: good (used), Year of construction: 1991, functionality: fully functional, turning diameter: 250 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 70 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 500 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 3,900 mm, total width: 1,800 mm, overall weight: 4,500 kg, Tool turret: 12 positions Power supply: 380V Length with chip conveyor: 3.9 m Kdedpfxex Naiwj Ag Ujg Machine rated power: 21 kVA

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1067, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 28 kVA, torque: 80 Nm, controller manufacturer: Okuma, controller model: OSP-U100L, workpiece height (max.): 500 mm, workpiece weight (max.): 700 kg, table width: 560 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 15,000 h, coolant supply: 20 bar, spindle nose: BT-40, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, 3-axis machining center with internal cooling through the spindle, 15,000 rpm, permanent oil cooling of the spindle. Various tool holders (collets, drill chucks, Weldon holders, and milling head holders). 3 Gressel-Gripos 125 mm vises as new, additionally tool presetting device PWB Toolmaster 250. Kedpfxow S Nc Re Ag Ujdg

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Ksdpfxoxg Itvo Ag Usdg Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm

Condition: excellent (used), Year of construction: 1999, X-axis 762 mm Y-axis 460 mm Z-axis 450 mm Working area 1,000 x 460 mm Spindle speed 7,000 rpm Tool holder SK40 Drive power 7 kW Weight 5,500 kg Ksdpfex Ek Ngox Ag Uodg Incl. 2-position pallet changer Incl. internal coolant supply (IKZ) Incl. complete documentation

Condition: used, Year of construction: 2004, travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, controller model: OSP-E100M, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, table height: 630 mm, spindle speed (min.): 12,000 rpm, power: 37 kW (50.31 HP), Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in the tool magazine 60 Kdsdpfxsxnkvis Ag Usg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2002, turning length: 200 mm, turning diameter: 300 mm, spindle bore: 40 mm, spindle speed (max.): 4,000 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The Okuma LVT300M CNC lathe shown in the picture is for sale. The machine is currently in production! Driven tool, C-axis machine. It can be viewed in operation. Main parameters: -Control: OSP100 -Hydraulic chuck Kdsdpfx Aox Uzyusg Uog -Hydraulic saddle -Maximum swing: 300 mm -Maximum length: 200 mm -Spindle diameter: 40 mm -Turret: 12 positions

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 600 mm, turning diameter: 370 mm, Machine Type: CNC Turning Machine Manufacturer: Okuma Model: LU300-2ST Year of Manufacture: 2005 Control: OSP-E100L Availability: In stock Machine Equipment: - Parts conveyor belt and collection tray – workpiece chute with removal conveyor, including electrical kit - 2 turret disks with VDI40 (12 + 8 stations) - Power chuck cylinder for hollow spindle – pull tube bore 52 mm - Expansion kit “D” – Kit one-touch IGF-D - Chuck open/close while spindle is running via M-code - Reinforced coolant pump 8 bar - Coolant can be switched on/off at turret A and B via M-function - Interface for bar feeder connection - Chip conveyor Technical Details: - Swing over bed: 530 mm - Swing over cross slide: 380 mm - Distance between centers: 600 mm - Max. turning diameter: 370 mm - Max. turning length: 600 mm - X-Axis travel: upper 260 mm / lower 140 mm - Z-Axis travel: upper 640 mm / lower 615 mm Kjdpfx Agexz Eqbo Uodg - Rapid traverse X-Axis: 20,000 mm/min - Rapid traverse Z-Axis: 25,000 mm/min - Spindle speed: 45 ~5,000 rpm - Spindle bore: 62 mm - 2 tool turrets: upper 12 stations, lower 8 stations - Spindle power: 22/15 kW - Machine dimensions (L x W): approx. 2950 x 2050 mm - Machine height: approx. 2010 mm - Weight: approx. 6,500 kg Options: - Organization and execution of transport - Machine installation and placement - Machine commissioning