Used Okuma Lr 15 for sale (197)

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Rcedpfx Aasrtrlzs Eok Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Rcedpfx Aexzgkioa Ejk Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), CNC control, control panel, machining center -Removed from a: CNC lathe, manufacturer: Okuma, type: LB15 Rsdpodtcrkefx Aa Eock -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Rcsdex I Nbtepfx Aa Esk Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2005, condition: excellent (used), Okuma MB-46 VAE 2005 Rcedpfxjh If Spe Aa Eek - max. machining dimensions 760x460 mm - max. loading weight 700 kg - table dimensions 1000x460 mm - travels X= 762, Y= 460, Z= 460 mm - distance table-spindle 150-610 mm - max. speed 15.000 rpm - tool capacity: 32 - tool holder SK 40 spindle makes noise ( videos available)

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm total power requirement: 43 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m max. table loading capacity: 500 kg Rcsdpfsxrwpdox Aa Eek

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Rcsdpjx I Axrofx Aa Eok Manuals

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Rcedpfxjxzi D Sj Aa Ejk Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: ready for operation (used), Okuma OPUS 5000 GHP Power Supply 5000T SN: 00198 , serial no. according to photo ,used, normal signs of wear, 100% functional Rsdpfei Ecarjx Aa Esck

Year of construction: 2006, condition: ready for operation (used), Control Unit Rcodpfx Aaex D Nf Ij Eok Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Rcsdpfx Aaorfw Nho Esk Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Turning length: 1,000 mm Turning diameter: 360 mm X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Swing over bed: 580 mm Main spindle: Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor Rodpfxeq Dpuzj Aa Ejck 8 bar coolant pump

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t Rcedpsxwp Ebefx Aa Eok dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe (2 machine cell) Model: LVT 400 Rcsdpfoxwy S Esx Aa Eek Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Rcedpfx Aei Ecaysa Eok

Year of construction: 1995, condition: ready for operation (used), Main Drive Number of axis 2 Movement Rcedpsx D R N Isfx Aa Eok X-Axis Movement 405 mm Y-Axis Movement 1505 mm This Okuma LH35-N was manufactured in 1995. A robust horizontal turning machine, it offers reliable performance for various machining tasks. If you are looking to get high quality turning capabilities consider the Okuma LH35-N machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1990, 2. Turret disks with tool holders. For CNC lathe OKUMA&HOWA 2SP Rcjdpexr Diwjfx Aa Eok

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-100 , serial no. according to photo ,used, normal signs of wear, 100% functional Rcodpei Ecacefx Aa Ejk

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand OKUMA Model OSP-P200M Main Drive Spindle speed range 15000 rpm Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 625 This 4-axis Okuma MA-400HA horizontal machining center was manufactured in 2007. It features a 560mm X-axis, 610mm Y-axis, 625mm Z-axis, and a table size of 400x400mm. The machine includes a 15,000 rpm spindle, 100-tool matrix magazine, and OSP-P200M control. It also boasts a 6 APC/pallet pool and a Mayfran Consep 2000 chip conveyor. Consider the opportunity to buy this Okuma MA-400HA horizontal machining center. Contact us for more information about this machine. Application Types Rcjdpfxsx D Nf Ue Aa Esk Milling

Condition: ready for operation (used), Okuma BL-D30A Servo Drive SN: 22-102 , serial no. according to photo ,used, normal signs of wear, 100% functional Rodpoi Ecagofx Aa Eock

Condition: ready for operation (used), Okuma DC Power Supply 6 Axes PCB with E4809-436-002-A, used, normal signs of use, 100% functional Rcsdpfx Aji Ecakea Eek

Condition: ready for operation (used), Okuma 1006 inverter BLII-D50A Vers.1.2 consisting of board E4809-820-006-A + board E4809-770-069-A, used, normal signs of use, 100% functional, scope of delivery as per photos Rcodjt Izafepfx Aa Eek

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-071, serial number as per photo, used, normal signs of wear, 100% functional Rcodpfx Aoi Eca Ssa Eek

Condition: ready for operation (used), Okuma SDU-600.W Spindle Drive Unit Model 1A E04809-045-019D, serial number as per photo, used, normal signs of wear, 100% functional Rodpfx Aaoi Eca Is Eeck

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Rodpfoi D Naasx Aa Ejck