Used Oerlikon Boehringer Vdf 180 Cu for sale (60)

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V Hodpfx Agjlffdys Ujfb They have manual and Ce.

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Hfodpfx Agshcnhme Ueb Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Hfodpfxouanq Ts Ag Ujb

Condition: used, Excellent welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional devices. This performance results in significant energy cost savings. • Over 100 synergy curves for almost all base materials (factory-equipped) • Wide process variety: - MIG/MAG Standard - MIG/MAG Pulse - MIG/MAG Special Arc Types - MIG Brazing - Manual Metal Arc Welding (basic, rutile, cellulosic) - Gouging with up to 8.0 mm electrode diameter Hedpswwtwdefx Ag Uofb • High-performance machines with up to 500 A at 60% duty cycle • Automation interface A1, no additional cards required for simple, analog integration • 99 memory slots • Password-protected parameter locking (fine adjustment within +/-20% still possible) • Program selection via torch button • Simple polarity change

Condition: good (used), Year of construction: 2001, operating hours: 31,789 h, functionality: fully functional, machine/vehicle number: 291545, travel distance X-axis: 70 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, gear diameter: 500 mm, helix angle: 90 °, 3-axis CNC testing machine for fully automatic hard and soft testing of spiral and hypoid bevel gears with an axis angle of 90° TECHNICAL DETAILS Bevel gear analysis: ROTEC T50 GA2 Color unit: Binks X-axis: ±70 mm Y-axis: 200 mm Z-axis: 200 mm CNC control: GE FANUC Series 160i-M Technical specifications Wheel diameter: max. 500 mm Pinion diameter: max. 400 mm Circular gear diameter: max. 500 mm Axis angle: 90° Speeds Speed range R: 0 - 3,000 rpm Hedovrd T Tepfx Ag Ujfb Speed range T: 0 - 5,000 rpm MACHINE DETAILS Rated current: 30 kVA Machine weight: approx. 6.2 tons Space required: approx. 3.2 m x 2.5 m x 2.3 m

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Model : UB2 Spindle taper : MT3 Vertical Travel : 590mm Spindle speed : 25-2560 rpm Table size : 700X880mm Hedpfx Ajxgcy Reg Uefb

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The Hfedsw N S E Aepfx Ag Ujb measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2009, condition: good (used), machine/vehicle number: 4495678, Offer 18336 Portable TIG-DC welder on transport cart Technical data: - TIG - DC + electrode welding - Welding current infinitely variable for TIG welding from - 5 A-10.0 V to 150 A - 22 V 35% ED - 100 A 100% ED - connection 220 V / 50 Hz 15 A - with: - 2 cycle 4 cycle - function - HF- ignition - Welding current descent adjustment - gas pre-flow regulation - gas post-flow regulation - hose package 4,5 lfm, light version - ground cable Hsdpohq T N Defx Ag Usfb - pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - weight approx. 10 kg - Transport trolley with gas bottle storage space W 550 x H 900 x D 560 mm - Weight of transport trolley approx. 10 kg

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is Hfsdpfx Aeul Efmjg Ueb largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2000, condition: good (used), machine/vehicle number: 84061, Offer 22629 - air-cooled direct - alternating current - unit, mobile - for welding of all weldable metals Hjdpfx Ageixp D Uj Usfb - e.g. stainless steel, steel, aluminum, brass, etc. - Welding current TIG infinitely variable from 20 A to 270 A 35% ED - A 100% ED - Connection 400 V - with: - Digital welding current display - Frequency control of the arc - HF - ignition - pulse device - hose package 5 m - pressure reducer - ground cable - trolley - Space requirement approx. W 550 x H 1150 / 1300 x D 950 mm - Weight approx. 180 kg