Used Niles for sale (65)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Nedpfsz Dgw Sox Ac Aswl

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Nodpfx Aezww R Ssc Aowl

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Nwodpszvrrhjfx Ac Asl Specifications: Swing: 1,000 mm Centers: 8,000 mm

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. Nwodpovu E R Sefx Ac Ael The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 720 mm, turning length: 3,500 mm, turning diameter: 780 mm, spindle bore: 123 mm, swing diameter over cross slide: 780 mm, workpiece weight (max.): 3,000 kg, overall weight: 29,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Njdpfx Aozkthtoc Ajwl

Condition: used, Year of construction: 2010, Technical details: Nwodjtpq Uropfx Ac Asl swing diameter: 260 mm control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, *

Condition: used, functionality: fully functional, machine/vehicle number: 40/35-22, Price on request Used Gear Grinding Machine Brand: NILES Type: ZSTZ 630 C3 Max. gear diameter = 630 mm Nwsdpfx Acowl Auno Ael Tooth width = 215 mm Module = 1 – 12 Number of teeth = 5 – 140 Table diameter = 500 mm Stroke = 500 mm Grinding wheel diameter = 270 – 350 mm Swivel range = 45° Strokes = 75 – 315 per minute Weight approx. = 6.3 t

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery Nedpfx Acox Ik Tde Aewl if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2009, turning diameter max. 750 mm turning length 3.500 mm turning length Standard: 3.071 mm control Sinumerik 840 D Siemens Working height 1.300 mm x-travel 435 mm z-travel 3.071 mm max. workpiece weight between centers 2.000 kg turning speed range - main spindle 10 - 3.000 min/-1 power capacity - main spindel 61,2 / 195 kW max. Torque 779 Nm Nwedpfezluhwsx Ac Asl spindle head A 11 DIN 55026 Spindle speed range subspindle 10 - 3.000 min/-1 power capacity - Sub spindle 73 / 233 kW max. Torque 932 Nm spindle head A 11 DIN 55026 spindle diameter in front bearing 180 mm U-axis min. -5 - max. 430 mm w-axis min. 276 - max. 3.347 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm x-axis Y0: min. -25 - max. 410 mm x-axis Y+55: min 70 - max. 505 mm x-axis Y-55: min -120 - max. 315 mm y-axis -55 - +55 mm z-axis min. 676 - 3.747 mm tool taper VDI 50 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity - driven tool-stations 9,7 kW Torque 50 / 31 Nm feed speeds X: 0,1 - 18.000 mm/min feed speeds Z: 0,1 - 30.000 mm/min rapid power traverse in X-and Z direction 18 / 30 m/min Feed force 15 kN total power requirement 85 kVA weight of the machine ca. 26,5 t dimensions of the machine ca. 9,0 x 4,0 x 3,3 m CNC Lathe NILES SIMMONS - N 30/3LT - 3500 - Extensive accessory package - NOT INCLUDED: Tools on the turrets! - Full-stroke clamping cylinders on BOTH spindles

Condition: used, Year of construction: 2005, Technical details: spindle passage: 54 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min diameter of main spindle: 120 mm max. torque on the spindle: 190 Nm tool turret: Typ Sauter number of tool tapers: 12 operating pressure: 5 - 6 bar quill stroke: 130 mm diameter of quill: 110 mm rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,0 t dimension machine approx.LxWxH: 4,8 x 2,4 x 2,3 m Nodpfx Ajy Ttyqsc Aewl • Modular machine design for efficient 2-axis and 4-axis shaft machining as well as chucking part machining • Equipped with pick-up spindle • High basic accuracy and thermal stability as prerequisites for hard turning and precision machining • Prepared for automatic loading and unloading via gantry loader or integrated loading system • Separable machining area for simultaneous two-stage machining on the left and right main spindles • Lowerable tailstock can be combined with a counter spindle • Supports in-process and post-process measurement strategies *

Year of construction: 1981, condition: ready for operation (used), A Niles gear grinding machine is offered. Max. gear diameter: 630mm, gear width: 215mm, module range: 1-12, ram stroke rate range: 75-315 double strokes/min, stroke length: 225mm, number of teeth min./max.: 12/140, min. root diameter: 50mm, max. tip diameter: 630mm, table diameter: 500mm, workpiece dimensions X/Y/Z: 630mm/200mm/700mm, max. workpiece weight: 400kg, min./max. grinding wheel diameter: 250mm/350mm, grinding wheel bore: 127mm, grinding wheel width: 30mm, grinding wheel speed: 1690rpm, weight: approx. 6300kg. Including cabinet with change gears and counter support. Documentation available. Inspection by prior arrangement is possible. Nodpfx Ajzrn Nboc Aewl

Year of construction: 1983, condition: ready for operation (used), A Niles gear grinding machine is offered. Module range: 2-14, table diameter: 630mm, workpiece dimensions X/Y/Z: 800mm/290mm/1500mm, min./max. generating grinding stroke: 20mm/280mm, ram stroke rate range: 20-280double strokes/min, min./max. number of teeth: 5/360, root diameter: 50mm, max. tip diameter: 800mm, min./max. grinding wheel diameter: 270mm/350mm, grinding wheel bore: 127mm, grinding wheel speed: 2450rpm, weight: approx. 10000kg. Including paper band filter, cabinet with change gears and oil mist extraction unit. Inspection possible by appointment. Nwsdszrn Nhspfx Ac Asl

Condition: used, Technical details: turning diameter over bed: 1200 mm turning diameter over support: 800 mm turning length: 3200 mm length of gap: 600 mm center height measured in bed: 600 mm turning dia. in gap: 600 mm spindle turning speed - continuous: 4,6-545 / 22 steps U/min spindle passage: 90 mm Nodszuyfaopfx Ac Aswl feed: 1,4-510 m/min taper: MK6 total power requirement: 15 kW weight of the machine ca.: 10,0 t dimensions L x W x H: 6,20x2,00x1,80 m dimensions electric cabinet LxWxH: 0,55x0,33x1,0 m equipped with: face chuck diameter 1000m (4 jaw chuck) fourfold chisel taper steady rest closed, inside diameter 250mm revolving tail center conical turning device *

Condition: used, Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Nwjdpfx Aozwgntsc Aol Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Nwodpfxjwbuyze Ac Ael

Condition: used, turning diameter over bed 1650 mm turning diameter over slide rest 1200 mm turning length 7500 mm turning dia. in gap 2500 mm spindle diameter 105 mm speed 3,55 - 180 (x24) U/min voltage 380 V 4-jaw faceplate Ø 1.600 mm Steady rest Ø 700 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nodpfx Ajyqthboc Aowl We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Nwodpfx Aowwarujc Ajl Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, turning diameter over bed 4000 mm turning diameter over slide rest . mm turning length 5000 mm Nwsdpfoyqtgdsx Ac Ael total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m Specifications Turning length (mm) 5000 Max. turning diameter (mm) 4000 Max. turning diameter at offset (mm) 5000 Speed ??1.4 - 71 (18x) kW 30 Voltage 380V Hz 50 Including: 4-jaw faceplate Ø 3150 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, max. wheel diameter 2000 mm gear width . mm max. module 22 max. hob diameter 250 mm hob turning speeds 16-92 U/min total power requirement 13 kW The tech. Data are manufacturer or operator information and therefore non- Njdpoyqukkjfx Ac Aowl binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Nwsdeyv Aucjpfx Ac Ael

Condition: ready for operation (used), Year of construction: 1989, Gear grinding machine NILES ZSTZ 10 H Table diameter: 1000 mm Max. working diameter: 1250 mm Module: - Min.: 2 - Max.: 25 Max. helical angle: 45 degrees Max. workpiece weight: 4000 kg Number of teeth: 10-250 mm Dimensions: 7700x4540x3320 mm Machine weight: 30 tons Nwedpfxszk E U Ee Ac Asl A set of change gears is available. Video of the machine in operation is available!

Condition: used, Year of construction: 1969, turning diameter over bed 500 mm turning diameter over slide rest 330 mm Nwjdpfx Acsy Tyy Do Asl turning diameter in the gap 600 mm turning length 3000 mm bed width 505 mm spindle bore 72 mm spindle head DIN 55022 Gr. 8 taper in tailstock MK 5 turning speed range 22,4- 1120 U/min power requirement 18,5 kW dimensions 5,3 x 1,75 x 1,53 m weight of the machine ca. 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix "C" toolholder system - some toolholders - steady

Condition: used, Year of construction: 1998, turning length 4.500 mm Nwjdex Emvispfx Ac Asl greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, Nwsdpfx Acexb Efro Ajl - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1962, turning diameter over bed 1250 mm turning diameter over slide rest 1250 mm turning length 9000 mm faceplate 1300 mm 3-jaw chuck 500 mm centre distance 10.000 mm bed width 850 mm turning dia. in gap 1600 mm steady 810 mm steady 410 mm steady 470 mm total power requirement 54 kW weight of the machine ca. 33 t Multifix steel holder with inserts Nsdpfx Ajyqvg Tjc Aewl The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team