Used Cnc Mikron for sale (179)

Condition: good (used), Year of construction: 2002, Machine is in good condition. Parts shown by hand not come. Tsdpfx Ahotwpamoujf

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 155, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Todpfxepcf D Is Ahuof

Condition: good (used), Complete specifications can be found in the photos of the listing. CNC HEIDENHAIN 426. The machine is in excellent mechanical condition. Tsdexl Htfjpfx Ahusf

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right Tsdpfx Ahsw A Af Ieuof - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm Tjdpfo H I Hdox Ahuof movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Tsdpfx Aoq Hdwuehuof Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Todpfxsxwycdo Ahusf

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Tsdjxcxz Nepfx Ahujf

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 Tjdpjfbma Njfx Ahujf -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 Tsdjt Hwxbspfx Ahuof min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm Tjdpfx Aec Tt Hrshusf accessories: angle table, coolant equipment, div. retainers

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Tedpfx Aheruauqjuof Machine have 2 spindles. One for 6.300 min-1 SK 40 Second up to 42.000 min-1 HSK E40. Spindle replaced 2018.

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Tedpfx Ahotuwk Usujf

Condition: used, CNC control, control panel, machining center Todpfx Ahokxhn Eousf -Manufacturer: Heidenhain, control panel/CNC control from CNC milling machine Mikron WF 51C/155 -Control: Heidenhain TNC 155 -Individual components: see photos -Dimensions: 660/640/H610 mm -Weight: approx. 73 kg

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Todsuxrv Hepfx Ahujf Technical data shown on pictures.

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Todpfx Aow H At Hohusf

Condition: used, CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos Tjdpfx Aopz Sf Eehujf -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Tjdpfx Asuzimnjhuof Control unit TNC 426

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes internal coolant supply and external cooling. Documentation available. An on-site inspection is possible. Tjdpfsw Exr Aex Ahusf

Condition: good (used), Parts on table not come. Marked with red. Todpfx Ahowxdyxjujf

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. Todpfjwk Nm Isx Ahujf 10.000 rpm

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Tjdpsm Dtnrsfx Ahuof Pallete changer EROWA not come.

Condition: good (used), Year of construction: 2016, Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis , 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, Todpjwq A Rgjfx Ahuef 60 tools, swarf conveyor.

Year of construction: 1997, condition: used, Price: On request - Year: 1997 Todpjwnh Hhjfx Ahujf - Documentation available: No - CE certificate present: No - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Empty weight: 2.000 kg Dimensions (LxBxH): 245 x 210 x 186 cm - Documentation available: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Heidenhain - Control system type: TNC 114 - Number of axes [pcs]: 3 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 560 - Table length [mm]: 750 - Table width [mm]: 425 Todpfx Ahownhqtsujf - Tool holder: ISO40 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 4000 - Options: Digital readout - └ Type of digital readout: Heidenhain TNC 114 - Transport dimensions: 2450mm x 2100mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum