Used Nc Milling Machine for sale (128,671)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, mount diameter: 30 mm, total height: 1,800 mm, total width: 950 mm, total length: 2,000 mm, table width: 120 mm, table length: 420 mm, Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: presumably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm With 2 T-slots and a special EMCO vise Jaw width: 60 mm Travel paths: X: approx. 300 mm Gsdpfx Adow Ivu Eswskd Y: approx. 300 mm Z: approx. 200 mm Includes matching mobile workbench with various compatible contents Includes 7-position tool changer, collets, and various suitable tool holders

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Gjdpfx Aexp Rgkjdwekd Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: excellent (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, pivoting range: 360 °, SHW PowerSpeed 5 Travel Paths • X-axis (Bed): 10,000 mm • Y-axis (Vertical): 2,100 mm • Z-axis (Horizontal spindle): 1,300 mm Control System • CNC Control: Heidenhain iTNC 530 Feed Rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Intermittently 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Coolant System Gksdpfjxgq Aysx Adwjd • Tank capacity: 500 l About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include supply of spare parts, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ---- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used bore milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC mill - CNC fraesmaschinen - CNC milling machines - milling machine - large component machining - large part machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, Year of construction: 1988, x-travel 0600 mm Gkedpfxeu Rt I Is Adwed y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 5,000 rpm, Used STS moving column milling machine model Performance with: - X-axis travel 6000 mm - Y-axis travel 1200 mm - Z-axis travel 2000 mm - Selca 4045D CNC unit - 2 clamping tables - Table size each: 3500 x 2000 mm - Automatic head 1°x1° - Spindle speed: 5000 rpm - Tool magazine with 40 positions Gkjdpfxjxn Axij Adwed - OMR rotary table, full 4th axis, 1000 x 1000 mm - High-pressure coolant system through spindle: 20 bar - Standard accessories included Free 12/24 month payment extension

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Gkodpfx Adexf Inkjwsd Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. Gjdoxab T Aepfx Adwekd - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: excellent (used), Year of construction: 2007, Control: Heidenhain iTNC 530 Table Clamping surface: 1200 x 450 mm T-slots: 6 x 18 H7 mm Maximum load: 400 kg Gkjdjxd Tgispfx Adwod Feeds Longitudinal travel: 650 mm Cross travel: 480 mm Vertical travel: 475 mm Feed (X, Y, Z): Infinitely variable Rapid traverse X,Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Feed motor AC (Z): 4.0 (10.5) Nm Spindle Speed range: 55 – 4000 rpm Speed control: Frequency controlled, stepless Spindle taper: ISO 40 Spindle power: 7.5 kW Spindle swivel: ± 90° Spindle stroke: 140 mm Weight Net weight: 2100 kg Gross weight: 2300 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 36 rpm, table width: 800 mm, table length: 3,000 mm, rotational speed (max.): 4,000 rpm, Equipment: documentation/manual, SHW UFZ 4 Rigid upright Travels - X-axis (bed): 3,000 mm - Y-axis (vertical): 1,300 mm - Z-axis (headstock): 1,000 mm Control system - CNC control: Heidenhain iTNC 530 Table assembly - Clamping surface 3,000 x 800 mm - Traverse path X = 3,000 mm Universal milling head in orthogonal design - Swivel range of milling head holder: 360 x 1 degree - Swivel range of milling head: 180 x 1 degree - Tool holder: SK 50 DIN 69871 - Speed range: 36 - 4,000 1/min RETROFIT in 2008 - Year of construction 1992 Chip conveyor - Feed length: 3,000 mm Automatic tool changer - Magazine for 45 tools About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ used machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used milling machine - used cnc milling machine - used milling machine - used metal milling machine - used metal milling machine - used cnc milling machine - used metal milling machine - used milling machine metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - UFZ4S - UFZ 4 S - Rigid Stacker - Bed Milling Machine - SHW Uniforce - Heidenhain iTNC 530- Heidenhain - MBM Milling Machine - MBM Machine - Column Milling Machine Gsdpfxst Epnxj Adwekd

Condition: excellent (used), Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Gkodpfx Adewif Rmswed Spindle Speeds: To 1800 RPM

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Gkodpfx Asxlghpedwod Travel paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available - Inspection by appointment possible

Condition: used, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D contouring control Heidenhain iTNC 530 Travel X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate 0–20,000 mm/min Rapid traverse X-axis 100 m/min Rapid traverse Y+Z-axis 50 m/min Power supply 400 Volt, 50 Hz, 73 kVA - 30-position tool changer - Internal coolant supply through the spindle, 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through spindle center via M-function - 2 rotating safety windows - Operating mode 4, process monitoring during production - Electronic handwheel at the handheld command station - Separate coolant treatment system, paper band filter with filtration sump - Chip conveyor for positioning under the work area - Centralised grease lubrication - Operating manual - Operating hours – control on = 75,188 h - Operating hours – program run or spindle on = 31,632 h - Controller with interfaces for data transfer, RS232C + USB Footprint L x W x H 650 x 400 x 280 cm Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel) Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg) Main machine transport dimensions L x W x H 500 x 248 x 275 cm Additional transport space required for further parts 550 x 240 x 250 cm Weight of main machine approx. 12.5 t Gksdjw Iqt Ajpfx Adwjd Good condition

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) Gsdpfxew U U Sij Adwskd - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,390 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 540 mm, table load: 1,500 kg, controller model: Heidenhain TNC 355, TECHNICAL DETAILS Travel X: 1,390 mm Travel Y: 710 mm Travel Z: 540 mm Table width: 560 mm Table length: 1,800 mm Table load capacity: 1,500 kg Tool holder: SK50 Speed range: 45 - 2,240 rpm Vertical speed: up to 2,800 rpm Feed range: 3 - 2,000 mm/min MACHINE DETAILS Control: Heidenhain TNC 355 Main drive: 18.5 kW Transport dimensions & weight Transport dimensions (L x W x H): 2.7 x 3.0 x 2.9 m Transport width with X-axis drive removed: 2.45 m Machine weight: approx. 5.5 t EQUIPMENT Rapid traverse on all 3 axes Swivelling milling head +/- 45°, including quill stroke 90 mm Swivelling bracket for vertical milling head Gkjdpfx Asxn S Sfedwod Swivelling counterholder for horizontal milling arbors Electromechanical tool clamping Manuals

Condition: used, Year of construction: 1979, x-travel 300 mm y-travel 160 mm z-travel 340 mm spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min Gsdjviyf Hspfx Adwjkd creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 1,6/2 kW weight of the machine ca. 570 kg dimensions of the machine ca. 1,2 x 1 x 1,75 m with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. We ask private interested parties to refrain from making an inquiry, as this is a well-maintained professional machine and usually exceeds the budget of hobby mechanics, including VAT. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2013, Emco emcomat FB-600 CNC milling machine in Nieuwstraat! Gkjdpfx Ajxc H H Hsdwsd

Year of construction: 1990, condition: used, machine/vehicle number: 90030003, table size: 500 x 1200 mm movement x: 1000 mm movement y: 550 mm movement z: 600 mm spindle taper: ISO 40 spindle turning speed range: 60 - 2700 rpm spindle drive: 10 kW electrical connection: 380 V, 20 kVA kW space needed: 3200 x 2800 x 2650 mm Gjdpfo Npwfjx Adwjkd weight: 7,3 t

Condition: used, Year of construction: 2023, Maximum sheet thickness 14 gauge Overall length 10' Technical specification: 2023 EFM-1014CNC, 10' x 14 Ga. - Sheet Metal Bending Machine | CNC Folder #7806 ESA CNC control, manufactured in Italy Large 16-inch digital touchscreen display Max. 99 bends per program Memory for up to 2,000 programs Profile library with graphics Programmable radius bending Programmable angle/angle correction 48-inch CNC backgauge with table and fingers Performance Mild/hot-rolled steel, tensile strength 60,000 PSI Stainless steel/cold-rolled, tensile strength 85,000 PSI Soft aluminum, tensile strength 28,000 PSI Closing beam Opening beam 14 Ga. 18 Ga. 10 Ga. / 1/8” thickness 26 Ga. 24 Ga. Bending length capacity 10'1" Bending angle, programmable 0-135 degrees Bending capacity, mild steel 24 Ga. Bending capacity, stainless steel 28 Ga. Large beam/clamping beam opening 4-7/8" Min. reverse bend 1/2" Max. backgauge table travel 48-3/8" Min. backgauge table distance 1/2" Backgauge repeatability 0.0039" Backgauge table height 35-3/4" Bending beam motor 4 HP, 3-phase, 35 A Wiring: 220 V AC Backgauge servo motor 2 HP, 3-phase 220 V AC Clamping beam motor 1-1/2 HP, 3-phase Gkodpfsxtt Niox Adwed Wiring: 220 V AC Machine weight: Shipping weight: 9,850 lbs 10,150 lbs Machine dimensions (L x W x H): Shipping dimensions: 168" x 79" x 67" 174" x 80" x 71"

Condition: new, functionality: fully functional, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, input frequency: 50 Hz, input voltage: 400 V, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Gedpfsxd Si Asx Adwjkd Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: like new (used), Year of construction: 2007, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Gkedpfexaqh Nsx Adwed Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 - 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accesories Guarding with 2 doors and new perimetral safety fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale conditions: On request View all technical features

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Gkodsxk Uy Dopfx Adwed Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 20645, Offer 24309 Technical data: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mechanical / manual 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance milling spindle - table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds horizontal in 16 steps regul. 56 - 1800 rpm - Spindle speeds vertical in 16 steps regul. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display Gkjdpfx Adjt Tad Hewjd - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, position of the milling head: VERTIKÁLNÍ, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, table width: 630 mm, table load: 2,000 kg, table length: 2,200 mm, table height: 800 mm, total height: 3,670 mm, total width: 3,250 mm, total length: 5,000 mm, type of input current: three-phase, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 2,000 kg, overall weight: 14,500 kg, year of last overhaul: 2025, torque: 900 Nm, spindle motor power: 23,500 W, power: 23.5 kW (31.95 HP), Equipment: rotational speed infinitely variable, FCQV 63 CNC - TOS KUŘIM Bed Type Milling Machine System: TNC 415F Gkjdpexp Dz Uofx Adwjd Warranty: 6 months Availability: immediately available FCQV 63 CNC Technical specifications: Manufacturer: TOS Kuřim Overall length: 5,000 mm Overall width: 3,250 mm Overall height: 3,670 mm Total weight: 14,500 kg Number of tool magazine positions: 24 Total power consumption: 45 kVA Working range: Longitudinal travel X-axis: 1,500 mm Cross travel Y-axis: 630 mm Vertical travel Z-axis: 630 mm Spindle: Spindle taper: ISO 50 Number of speeds / speed range: stepless / 11 – 2,500 rpm Spindle motor power: 23.5 kW Max. spindle torque: 900 Nm Feed rate range X – Y / Z: Number of speeds / range: stepless / 1 – 2,000 mm/min Rapid traverse: 10,000 – 10,000 / 10,000 mm/min Table: Table size (width x length): 630 x 2,200 mm Max. table load (axially): 2,000 kg Control system: Heidenhain TNC 415F Further details upon request.

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW Gjdpfx Aeu Rt Nxsdwokd weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control.

Condition: used, Year of construction: 1980, spindle diameter 105 mm cross travel of table 1600 mm vertical adjustment of drilling slide 1600 mm longitudinal movement of column 1000 mm spindle stroke - max. 600 mm spindle taper ISO SK 50 Gjdpfx Asu Rt Inedwokd spindle turning speed range 6,3- 1600 U/min table surface area 1120 x 1120 mm spindle motor 45 kW voltage 400 V feeds x/y/z -stepless 0 - 5000 mm/min rapid travel x/y/z 10 m/min table load 6 t table rotation 360 ° total power requirement 82 kW weight of the machine ca. 18 t dimensions of the machine ca. 4,8 x 4,9 x 4,2 m Machine was complete reconditioned and retrofitted with Siemens 840 D control in 2008 for a price of 400.000,- Euro ! Machine has a 40 position ATC, 5 CNC axes with ball screw drives (X,Y,Z,W,B), housing around machine with safety doors, cooling arrangement built in 2020 and new spindle drive Siemens built in 2008.