Used Nail Gun for sale (1,477)

Condition: new, functionality: fully functional, mileage: 1 km, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, crane, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Kedpfx Aexr Rwhenwjdn Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: new, functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 5,250 kg, empty load weight: 5,250 kg, operation weight: 5,250 kg, maximum load weight: 2,000 kg, lifting power: 2 kg/m, lifting height: 4,500 mm, tire size: 16 / 70-20, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.8 m³, Year of construction: 2024, load capacity: 2,000 kg, Equipment: additional headlights, cabin, hydraulics, GUNTER GROSSMANN GG TELE 2000 New high quality telescopic loader Description Loading weight: 2000 kg Bucket capacity: 0.8 Min. Turning radius: 4600 mm Lifting height: 4500 mm Lifting speed: ≤5.0 s Driving mode: full hydraulic drive on four wheels; Transmission gearbox: hydraulic variable with 2 speeds Kodpfx Aneu Dcgmswodn Total weight: 5250 kg Dimension (L * W * H): 5800 * 2000 * 2750 mm Quick change :yes Includes: Hydraulic Joystick + Quick Coupling + Bucket SPECIFICATIONS Engine: Luotuo Cab: Luxury Adjustable steering wheel: yes Tire size: 16 / 70-20 Timer: Yes Work lights: Yes -LED Reverse camera: Yes Total weight of the machine: 5250 kg Loading weight: 2000kg MAIN DIMENSIONS Dimension (L * W * H) 5800 * 2000 * 2750 mm OPERATING RANGE The height of: 4,5m Rated: speeds 2400 obr./min Maximum: Bucket pull-out force, lifting cylinder 60KN Drive: Four-wheel drive Maximum speed: 22 km / h Braking mode hydraulic: four-wheel disc brake Lifetime: ≤5.0 s

Condition: new, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 950 kg, empty load weight: 950 kg, operation weight: 950 kg, maximum load weight: 950 kg, lifting power: 150 kg/m, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: additional headlights, adjustable chassis, GG900 KUBOTA D722 DIESEL Euro 5 incl articulated boom Mini excavator GG 900 - brand Günter Großmann The mini excavator GG 900 from Günter Grossmann is the perfect solution for anyone looking for an effective and economical tool for field work. Manufactured in 2024 - this machine stands out from the competition and at the same time offers the highest quality at the lowest price on the market. Noteworthy is the KUBOTA engine, which with a rated power of 15 hp at 3,600 rpm meets the Euro 5 standard and offers sufficient power for even more demanding work. This engine is known for its reliability and durability and guarantees long-term use. Model GG 900 Has an adjustable rail and a swiveling knuckle arm / frame / hinged arm, which makes working on a wall or fence much easier The Wanye hydraulic main pump and the hydraulic pressure of 16 MPa guarantee effectiveness in intensive work and ensure fast and precise movements of the bucket and other working equipment. In addition, both the rotary motor and the Dali traction motor ensure reliable operation of the machine. We have all parts for our brand machines in stock in Europe Kdsdpevula Tsfx Anwsn (excl. VAT) (Including: Excavator GG900 + bucket 300 mm) kubota engine Articulated boom ) SPECIFICATIONS Model: GG900 Brand: Günter Grossman Engine: KUBOTA D722 DIESEL Euro 5 Cylinder 3 cylinders Power: 15 HP Working weight: 950 KG Bucket capacity: 0.025 cbm Bucket width: 300 mm Main pump: Wanye hydraulic Hydraulic pressure: 16Mpa - 160 Bar Rotation motor: Dali Travel motor: Dali The speed of driving: 1.5 km/h extra Articulated boom extra hydraulic connection with foot control DIMENSIONS Total dimensions (DxSxB): 2770x930x1490 mm Total track length: 1230 mm Track width: 200 mm Ground clearance chassis: 132 mm Track height: 320 mm WORKING RANGE Working area Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. dumping quantity: 1850 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. Increase the height of the bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 14.7 kW (19.99 HP), gearing type: hydrostat, fuel type: diesel, color: yellow, overall weight: 2,420 kg, empty load weight: 2,420 kg, operation weight: 2,420 kg, lifting height: 4,300 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, adjustable chassis, air conditioning, cabin, hydraulics, Excavators GT3000 The GT3000 excavator is a modern tracked machine designed for earthmoving operations requiring excellent working range, high digging force, and a stable construction. Thanks to its compact dimensions and robust undercarriage, the machine is ideal for foundation works, installation tasks, municipal projects, and operations in areas with limited maneuvering space. Engine The machine is equipped with a reliable Yanmar 3TNV80F engine delivering a rated power of 14.6 kW. This engine ensures stable and fuel-efficient performance. Working Range The excavator features a 0.09 m³ bucket with a width of 460 mm. The bucket digging force of 17.6 kN allows for efficient excavation, even in tougher soils. The maximum digging depth of 2810 mm and a maximum reach of 4375 mm provide a wide working range without the need for frequent repositioning. A digging height of up to 4510 mm and a dumping height of 2760 mm enable easy loading of materials onto transport vehicles. Dimensions and Stability The overall machine dimensions are 4010 mm in length, 1540 mm in width, and 2360 mm in height to the top of the cab (1380 mm to the top of the boom). The track contact length of 1530 mm and a track width of 1510 mm ensure stability during operation. Track shoes with a width of 250 mm and a low ground pressure of 26.7 kPa allow safe working on less solid surfaces. Mobility and Maneuverability Kdedpsymtdnofx Anwsn A tail swing radius of 710 mm allows comfortable operation in confined spaces. The swing frame width of 1350 mm and counterweight clearance of 485 mm, along with a minimum ground clearance of 255 mm, ensure smooth movement over uneven terrain. The robust undercarriage with a track length of 1895 mm provides excellent traction and safe operation. Technical Specifications Operating weight: 2420 kg Engine type: Yanmar 3TNV80F Number of cylinders: 3 Rated power: 14.7 kW Rated engine speed: 2200 rpm Max. hydraulic system pressure: 18 MPa Max. gradeability: 30° Ground pressure: 35 kPa Max. travel speed: 2.5–3.5 km/h Max. tractive force: 16 kN Max. slewing speed: 11 rpm Max. digging force: 15 kN Max. digging height: 4300 mm Max. dumping height: 2530 mm Max. digging depth: 2550 mm Max. digging radius: 4150 mm Digging radius at max. height: 2700 mm Minimum radius: 1800 mm Boom length: 1950 mm Arm length: 950 mm Bucket width: 450 mm Overall length: 3950 mm Overall width: 1400 mm Overall height: 2300 mm Minimum turning radius: 790 mm Track length on ground: 1870 mm Track width: 250 mm Ground clearance: 250 mm Platform width: 1330 mm Engine hood height: 1350 mm Platform height above ground: 480 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 11.03 kW (15.00 HP), color: yellow, overall weight: 1,000 kg, empty load weight: 1,000 kg, operation weight: 1,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, operating hours: 1 h, Equipment: additional headlights, hydraulics, Günter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag leas besprekbaar PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm WERKBEREIK Max. graaf diepte: 1650 mm Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm SnelkoppGünter Grossmann GG1000 kubota Dankzij een nauwe samenwerken tussen Günter Grossmann en Kubota is de nieuwe GG1000 graafmachine onststaan. Model GG1000 is een geweldige machine voor de meest veeleisende bouw-, elektrisch en hydraulische bedrijven. We garanderen service na de garantie. De graafmachine wordt vervaardigd op basis van solide Europese technologie Standaarduitrusting is een 38 cm brede graafbak. Extra accessoires voor de machine kunnen aangekocht worden. transport kosten uitsluiten op aanvraag PECIFICATIES Model: GG1000 Merk: Günter Grossmann Gewicht: 1000kg Capaciteit graafbak: 0.025 m³ Afmetingen graafbak: 2000mm, 380mm, 500mm Motor: Japan – KUBOTA Motor vermogen: 11.8 kw/2300r/min Hoofd pomp: Wanye Hydraulic Zwenkmotor: Dali Rijmotor: Dali Rijsnelheid: 1,5km/h AFMETINGEN Afmetingen (LxBxH): 2770x896x1490 mm Wielbasis: 770mm Lengte rupsen: 960mm Bonwqxjysh WERKBEREIK Max. graaf diepte: 1650 mm Kedpfxegi Rxke Anwodn Max. graaf hoogte: 2610 mm Max. dump hoogte: 1850 mm Max. graaf radius op de grond: 2890 mm Rotatie radius: 360° Max. Upgrade height of bulldozer blade: 345 mm Max. graaf diepte graafbak: 255 mm evt Bij te bestellen ACCESSOIRES Grondboor Grijper Graaftand Hark Smalle bak 200 mm Smalle bak 380 mm Niveleerbak 500mm Niveleerbak 800mm Snelkoppeling Breekhamer

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), gearing type: hydrostat, color: yellow, overall weight: 2,000 kg, empty load weight: 2,200 kg, operation weight: 2,200 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2026, machine/vehicle number: 2000, Equipment: additional headlights, cabin, GT2000 The GT2000 crawler excavator is a robust and versatile machine weighing 2,200 kg, ideally suited for earthworks, construction, and installation projects. Thanks to its stable construction and precise hydraulic system, it delivers excellent performance on large construction sites as well as in confined spaces. Engine and Drive The machine is powered by a reliable Yanmar 3TNV80F engine delivering 15.2 kW, ensuring fuel-efficient operation, long service life, and consistent performance. The excavator can also operate on slopes of up to 35°. Hydraulic System The hydraulic system operates at a pressure of 18 MPa, guaranteeing precise and efficient work movements. The bucket digging force is 14 kN and the arm force is 10 kN, enabling fast and effective excavation in various soil conditions. Operating Parameters The GT2000 can dig to a maximum depth of 2,050 mm, a vertical depth of 1,955 mm, and has a dumping height of 2,385 mm. The maximum working range is 3,860 mm and the minimum digging height is 3,365 mm. Rotation and Maneuverability The superstructure rotation speed is 10–12 rpm, ensuring efficient and fast work cycles. Both the minimum turning radius and the rear swing radius are 1,125 mm, facilitating maneuvering in tight spaces. Undercarriage and Stability The crawler undercarriage is 820 mm wide with a minimum ground clearance of 210 mm, providing stability. The ground clearance of the dozer blade is 230 mm and its maximum digging depth is 275 mm, supporting safe operation on uneven terrain. Swing Arm and Cabin The swing arm can rotate 75° to the left and 45° to the right, enhancing operational versatility. The cabin height is 2,270 mm, offering the operator good visibility and comfort during operation. Model: GT2000 Operating weight: 2,200 kg Engine type: Yanmar 3TNV80F Rated power: 15.2 kW Rotation speed: 10–12 rpm Maximum bucket digging force: 14 kN Maximum arm digging force: 10 kN Hydraulic system pressure: 18 MPa Maximum slope angle: 35° Travel drive: Single speed Swing arm: Yes Expandable tracks: Yes Joystick: Yes Standard bucket capacity: 0.06 m³ Rear swing radius: 1,125 mm Minimum digging height: 3,365 mm Maximum dumping height: 2,385 mm Maximum digging depth: 2,050 mm Maximum vertical digging depth: 1,955 mm Maximum digging range: 3,860 mm Ksdpfx Aeqv E S Renwsdn Minimum turning radius: 1,125 mm Dozer blade ground clearance: 230 mm Dozer blade maximum digging depth: 275 mm Swing arm angle left: 75° Swing arm angle right: 45° Cabin height: 2,270 mm Wheelbase: 1,230 mm Track width: 820 mm Minimum ground clearance: 210 mm

Condition: new, color: yellow, overall weight: 975 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, digging bucket width: 340 mm, Year of construction: 2023, Equipment: additional headlights, GG JAPAN 1000 Gunter Grossman & Kubota The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable track undercarriage 6. Articulated Boom pro 7. Hidden driving motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy tracks for a pleasant ride.. 14.2 driving speeds We have all spare parts for machines of our brand available throughout Europe Price 11990 EUR (excl. VAT) (Including: Excavator GG1700 bucket 380 mm) SPECIFICATIONS Model: Japan 1000 Brand: Gunter Grossmann Kjdpeh Uymyofx Anwsdn Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated Power: 11.8kw/2300r/min Main pump: Parkier Swing motor: Eaton Drive motor: Eaton Driving speed: 3 km/h Stick: Movable sideways Driving speed: two speeds Drive Motors: Hidden Snakes in the style: Hidden DIMENSIONS Total dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770mm Total length of the track 960 mm WORKING RANGE max. Digging depth: 1650 mm max. Digging height: 2610 mm max. Digging radius on the ground: 2890 mm Turning radius: 360° max. Dozer Blade Upgrade Height: 345mm max. Dozer blade digging depth: 255 mm

Condition: new, functionality: fully functional, mileage: 1 km, power: 11.03 kW (15.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,700 kg, empty load weight: 1,700 kg, operation weight: 1,700 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2026, Equipment: additional headlights, hydraulics, GG1700 3 cilinder kubota . Professional new excavator model: GG1700 from the international brand Günter Grossmann. Every Günter Grossmann machine comes with a company warranty. The GG1700 model is a great piece of equipment for the most demanding construction, electrical and plumbing companies. We guarantee service after the equipment warranty. Excavators are manufactured on the basis of advanced technology. We have all parts for our brand machines in stock in Europe Price EUR 16600 (excl. VAT) (Including: Excavator GG1700 + bucket 400 mm) SPECIFICATIONS Model: GG1700 Brand: Günter Grossmann Weight: 1700kg Joystick: Yes Extendable Tracks: Yes Movable swivel arm: Yes Engine brand: KUBOTA D902 Power: 25 HP Pump: TF PSA12NOO Kdodpfx Ashlv N Isnwjn Distributor: TF TKM15BX-08LP 01 Rotary Motor: Eaton VS Drive Motor: Eaton USA Driving speed: 0-8.5 km/h MEASUREMENTS Total length:: 3585 mm Total width: 1300 mm Total height: 2362 mm Minimum ground clearance: 1605 mm WORKING RANGE max. digging depth: 2300 mm Maximum digging radius: 4050 mm Maximum dump height: 2550 mm ACCESSORIES Bucket 300mm: 260 Eur ex Bucket 400mm: 300 Eur ex Bucket 600mm: 330 Eur ex Bucket 1000mm: 400 Eur ex Log grab: 600 Eur ex Ripper: 320 Eur ex Rake: 320 Eur ex Drill: 1800 Eur ex Quick coupler: 450 Eur ex Demolition Hammer: 1800 Eur ex

Condition: new, functionality: fully functional, mileage: 1 km, power: 16.5 kW (22.43 HP), fuel type: diesel, color: yellow, overall weight: 3,300 kg, empty load weight: 3,300 kg, operation weight: 3,400 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, cabin, The GG3500 excavator combines high power, outstanding performance, and reliability. Equipped with the KUBOTA V1505 engine and advanced hydraulics, it is ideal for demanding construction work. Thanks to its compact size and extensive capabilities, it is versatile across various job sites. High Performance and Powerful Engine Powered by the KUBOTA V1505 engine delivering 18.5 kW, four cylinders, and liquid cooling for efficient operation. Fuel consumption ranges from 1.3 to 1.5 L/hour, with a 45 L fuel tank enabling long working periods. Premium Hydraulic System Fitted with LTM03AX and LKC swing hydraulic motors, providing an oil flow of 99 L/min and a pressure of 20 MPa, ensuring strong digging power and system reliability. The hydraulic oil tank has a 40 L capacity for continuous operation. Excellent Operating Parameters Maximum digging depth of 2827 mm, digging radius of 4831 mm, and digging force of 27 kN. Maximum dumping height is 3181 mm, suitable for loading at greater heights. Compact Dimensions and Stability Dimensions: length 2921 mm, width 1550 mm, height 2485 mm, with a ground clearance of 522 mm. The bucket width is 400 mm and arm length is 1620 mm, ensuring precision and a broad working range. Mobility and Comfort Kdodpfex H Uxhox Anwsn Two travel speeds (0–1.8 km/h and 0–2.8 km/h) provide flexibility on the job site. Ground pressure of 36 kPa allows operation on soft surfaces, with a 360° swing radius for easy maneuverability in confined areas. Machine weight: 3300 kg Engine model: KUBOTA V1505 Number of cylinders: 4 Max. power: 18.5 kW Cooling method: Liquid-cooled Engine oil capacity: 6 L Fuel consumption: 1.3–1.5 L/h Max. engine speed: 2300 rpm Fuel tank capacity: 45 L Hydraulic oil tank capacity: 40 L Hydraulic motor model: LTM03AX Travel drive motor model: LKC Swing hydraulic motor model: LKC Hydraulic oil flow: 99 L/min Nominal pressure: 18 MPa Max. rated pressure: 20 MPa Bucket capacity: 0.08 m³ Travel speed: 0–1.8/0–2.8 km/h Gradeability: 0.3% Ground pressure: 36 kPa Max. digging force: 27 kN Max. digging radius: 4831 mm Max. digging depth: 2827 mm Max. digging height: 4563 mm Max. dumping height: 3181 mm Max. swing angle: 110° Length: 2921 mm Width: 1550 mm Height: 2485 mm Ground clearance: 522 mm Bucket width: 400 mm Blade width: 1550 mm Arm length: 1620 mm Track size: 300x52.5x84

Condition: new, functionality: fully functional, mileage: 1 km, power: 36.77 kW (49.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 2,800 kg, empty load weight: 2,800 kg, operation weight: 2,800 kg, maximum load weight: 1,400 kg, lifting power: 700 kg/m, lifting height: 2,050 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: cabin, GG700K Technical Specifications Engine Model: Kubota V2403 Net Power: 50 hp / 2500 rpm Engine Type: Inline 4-cylinder, water-cooled, 4-stroke diesel engine Rated Operating Capacity: 700 kg Rated Load Limit: 1,400 kg Operating Weight: 2,800 kg Bucket Capacity: 0.4–0.5 m³ Maximum Travel Speed: 12 km/h Hydraulic Pump Flow: 75 L/min Fuel Tank Capacity: 70 liters Dump Angle: 30° Dump Height: 2,380 mm Rollback Angle to Ground: 26° Lowering Angle: 20° Length: 3,350 mm Width: 1,720 mm Height: 2,050 mm Height at Maximum Reach: 3,980 mm Height to Bucket Hinge Pin: 3,080 mm Width with Bucket: 1,730 mm Track Width: 1,450 mm Wheelbase: 991 mm Ground Clearance: 180 mm Compact Loader GG700K Skid Steer Loader The GG700K is an advanced skid steer loader delivering high power, reliability, and exceptional performance in demanding work environments. Equipped with modern technology, it is perfectly suited for construction, agriculture, and tasks requiring both mobility and strength. Engine and Drive Powered by a Kubota V2403, a water-cooled, inline four-cylinder diesel engine delivering 50 hp at 2,500 rpm. This engine ensures fuel efficiency, durability, and reliable operation under heavy-duty conditions. Hydraulic System and Performance The hydraulic system provides a pump output of 75 l/min and supports a bucket capacity of 0.4 to 0.5 m³. It features a 30° dump angle, a dump height up to 2,380 mm, a 26° rollback angle to the ground, and a 20° lowering angle, ensuring stability and efficiency on rough terrain. Weight and Load Capacity Ksdjxuwvcspfx Anwedn With an operating weight of 2,800 kg, the GG700K can handle rated loads of 700 kg and up to 1,400 kg maximum load limit. This makes the GG700K ideal for medium-duty lifting and material transport. Speed and Maneuverability The machine reaches a maximum travel speed of 12 km/h, combining compact dimensions with excellent maneuverability for efficient operation in confined spaces and challenging conditions.

Condition: new, functionality: fully functional, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 1,020 kg, empty load weight: 1,020 kg, operation weight: 1,020 kg, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine Kdodpfxovuk Uvj Anwen 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable crawler chassis 6. Articulated boom pro 7. Hidden travel motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy crawler tracks for a pleasant ride .. 14 servo joystick control 15.2 travel speeds We have all spare parts for machines of our brand available throughout Europe SPECIFICATIONS Model: Japan 1000 Y Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated power: 11.8 kw/2300r/min Main pump: Parkier Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Digging arm: Movable sideways Travel speed: Two speeds Drive motors: Hidden Style hoses: Hidden DIMENSIONS Overall dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770 mm Total track length 960 mm WORKING RANGE Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. upgrade height of bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Coburg Exaflex 6126’ treatment chair. Item for sale: 1 x Coburg Exaflex 6126br /> Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Kodpfxox S E I Ro Anwsdn A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN BM 3 C bed milling machine with integrated rotary table – available for short-term delivery The LAGUN BM 3 C is a highly stable bed milling machine with an integrated rotary table for heavy and precision machining. Ideal for single-part production as well as series production with the highest requirements for rigidity, accuracy, and reliability – all without the need for complex foundation work. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing options available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed milling machines. The machines are impressive due to their high reliability, ease of maintenance, and economical operation. Technical features: Control: HEIDENHAIN TNC 7 CNC path control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems and electronic handwheel HR-510 Integrated rotary table: Ø 1,100 mm Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with double gripper Chip disposal: Double-hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your benefits with JMT: Kodpem Tv Iisfx Anwedn ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,000 mm, table width: 2,000 mm, torque: 1,288 Nm, coolant supply: 36 bar, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN ML 8 Traveling Column Milling Machine The LAGUN ML 8 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-piece production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease-to-own / financing options available ✔ High flexibility thanks to the traveling column concept ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of milling machines. The machines impress with their reliability, ease of maintenance, and economical operation. Technical specifications: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Automatic tool changer (ATC), 60-tool capacity Chip disposal: Hinged belt conveyor Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.050 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: Kodpfsh Ekucex Anwodn ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create a customized offer.

Condition: excellent (used), The tilt scale is fully functional. The scope of delivery includes: 01x inclination scale, used Manufacturer: Rapido-Werke dim.: approx. 1.250 x 1.360 x 2.250 mm (WxDxH) maximum load: 750 Kg feet: 04x / height adjustable with tare compensation Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately Kdsdpfx Anephph Iewjn depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Application: suitable for laid gratings for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Kdodpfx Ajn Tprnjnwon

Condition: used, Used machine Kedpfoxnfflex Anwsdn Features and technical data: Mobile extraction unit With filter bag on top Extraction nozzle: 140 mm Motor: 1.1 kW, 400 V Availability: short notice Location: Flörsheim

Condition: new, functionality: fully functional, total height: 1,640 mm, total length: 1,400 mm, total width: 1,100 mm, overall weight: 267 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-Flow Desk – 1000VH – 960 m³/h – 400 V Extraction table, welding and grinding table. Extraction table with a 1.1 kW fan, filter cartridge, and wooden slats, as well as a rear wall with extraction and a ceiling and side walls without insulation. The extraction table with automatic compressed air cleaning filter and integrated fan for extracting non-explosive, dry dust and gases. Ksdozdty Nepfx Anwsdn TECHNICAL DESCRIPTION: Extraction capacity: 960 m³/h Dust class: M Working area W/D in mm: W 892 / D 765 Working height in mm: H 690 - 924 Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1400* / D 1100 / H 1640 (optional L = 1500/2000 mm available) Compressed air connection: Yes, min. 5.5 - max. 6.0 bar (for filter cleaning) Fan power: 1.1 kW Operating voltage: 3 x 400 V, 50 Hz, 2-pole Noise level*: 65 db(A) without cleaning / 85 db(A) without cleaning Pipe connection: D = 250 mm Color: RAL 7042/RAL 7011 Weight: 267 kg * With fan and nozzle Application: The extraction table with a fan is used to separate dust and welding fumes from the process air. Suitable for work where vapors and dust are generated, such as welding, grinding, etc. Your advantages of the ISI-Flow Desk series: - 12 device variants available - Filtration with compressed air-cleaned filter cartridge according to dust class M - Automatic filter cleaning by pressing a button on the front - Differential pressure gauge for easy monitoring of the cleaning requirement - Integrated, energy-efficient fan 3x400V, 50 Hz, 2-pole; closed fan blades, backward-curved, self-cleaning impellers; ISO 14694 (BV3 G 6.3) balanced - Rear wall, side walls, and ceiling ensure effective extraction and holistic air flow - Height-adjustable work table - Wide range of mounting and connection accessories - Quality Made in Europe For safe, effective air flow from extraction to exhaust. The ISI Air extraction table must not be used in conjunction with ATEX zones. The images may contain accessories.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, Heidenhain TNC 426 control Table: 1400 x 700 mm Travel: 1300 x 800 x 800 mm Spindle: SA 50 Kodpfx Anozbrilswsdn Maximum spindle speed: 3000 rpm Weight: 10,000 kg

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Kedpfx Anozd N Szswodn Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Year of construction: 2020, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VF353, The "CeBeCo®" TROWAMAT® XL is suitable for cleaning wash items whose contaminants can be removed by spraying with detergent under pressure. The inserted basket, filled with wash items, is evenly passed by the nozzles positioned above and below, via a carousel wheel. Additionally, the wash items are sprayed by a nozzle system in the door and at the rear of the unit. Thanks to the high spray pressure and low rotation speed, a consistent cleaning result is achieved. TECHNICAL DATA Type: "CeBeCo®" TROWAMAT "XL" Size 40100/40 WST Drawing No. 3314-20 Tank: Approx. 3 mm thick stainless steel sheet 1.4301 Insulation: 25 mm mineral wool / Terodem Cladding: 1 mm galvanized steel sheet Usable dimensions: approx. 400 mm x 1,000 mm x 400 mm (height) Load capacity: max. 100 kg, with evenly distributed load Overall dimensions: approx. 2,700 mm x 1,825 mm x 2,530 mm (height) without roller conveyor Entry height: approx. 1240 mm Kdodpjyr Dkcjfx Anwjn Detergent: service water, aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Detergent tank volume: approx. 460 L Rinse agent: aqueous, pH 7 - 11, max. +70°C, non-foaming, concentration max. 5% Rinse agent tank volume: approx. 240 L The offer includes roller conveyor and washing baskets. For further information, please contact us.

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Ksdszdnzzjpfx Anwjdn Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Year of construction: 2012, condition: used, Max. Saw blade diameter: 530 mm Cutting capacity 90° Round 180mm, Square 170mm, Rectangular 380x70m Cutting capacity 45° left Round 180mm, Square 150mm; Rectangular 290x70mm Cutting capacity 45° right Round 180mm, Square 150mm; Rectangle 290x70mm Digital grade display for the saw table Cutting table swing range 180° Spray device Kdedpfxezabmqo Anwen 2-Hand-Bedienung

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN CM 6 Traveling Column Milling Machine – available for short-term delivery The LAGUN CM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Lease purchase / financing possible ✔ High flexibility thanks to the traveling column concept ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of milling machines. The machines impress with their reliability, ease of maintenance, and economical operation. Technical equipment: Control system: Two HEIDENHAIN TNC 7 digital path controls – one at the front of the machine and one at the rear in the cabin 2 x HEIDENHAIN TFT screens 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: Automatic tool changer (ATC), 60 positions Chip disposal: Hinged belt conveyor Preparation: Preparation for rotary table / 4th axis Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service Kjdpovrv Suofx Anwedn ✔ Fast availability of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 5AX-500 5-axis simultaneous machining center – available immediately The LAGUN L 5AX 500 machining center stands for high precision, robust design, and economical production. Ideal for single-part manufacturing as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / lease purchase possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and long-lasting machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical equipment: Control: HEIDENHAIN TNC 7 CNC control HEIDENHAIN TFT screen 16" HEIDENHAIN motors, scales and electronic handwheel HR 510 Chip disposal: Chip conveyor Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Kedpfxefdxhas Anwjdn Contact us – we will be happy to advise you and create an individual offer.