Used Nail Gun for sale (2,000)

Condition: new, functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Iodpfx Aoxr Rwhog Dsa Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: good (used), – ISO40 – 35/1800 rpm – Infinitely variable spindle speed – Table 1100 x 250 mm – Automatic feed on X, Y, and Z axes – Infinitely variable feed rate – Rapid traverse – Heidenhain digital readout on X, Y, and Z axes – 3D milling head – Coolant system – Protective cover – Emergency stop button – Tooling package Iedpoxtgfkefx Ag Doa – 380 V

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross-ram): 1,500 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210 mm) Iedpfx Ajq I Nlyjg Dea Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical/horizontal change) Double-hinged chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, hot runner control device Günther DPT 10 10x fach 230 Volt price: 1.850 Euro Ijdpfjh Uucfox Ag Dja contact: Mr. Rainer Eckerle

Condition: used, static maximum load 4,000 kg diameter 160 mm height 35 mm thread M 16 x 1.5 levelling height 20 mm Iodpfjfii Disx Ag Dea weight 2.2 kg - 95 units on stock - new - price per unit  

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Ijdpfoxyaivex Ag Dja

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Stability and Operator Comfort Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Iodpfx Agoxr Rwbj Dsa Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: good (used), Trapezoidal taps Diameter 40 mm Iededx Uy Ispfx Ag Dea Pitch 1/5 inch

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE WITH INTEGRATED ROTARY TABLE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measurement systems, and handwheel) Integrated rotary table: Ø 1,000 mm ICS: Internal coolant supply - 36 bar Iodpom Tv Iiefx Ag Dja Additional equipment: Standard tool changer with double gripper, 40 stations Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Peripheral enclosure Accuracies: Positioning accuracy: 0.015 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: new, Year of construction: 2023, functionality: fully functional, total width: 5,600 mm, total length: 8,600 mm, total height: 12,200 mm, overall weight: 62 kg, rotational speed (min.): 1,420 rpm, roller diameter: 127 mm, rotational speed (max.): 1,420 rpm, feed rate X-axis: 300 m/min, input voltage: 230 V, grinding belt width: 76 mm, power: 1.1 kW (1.50 HP), LAGUNA 1632 SuperMax cylindrical grinding machine - Lever for quick unit height adjustment + micro device. - Digital display of workpiece thickness. - Special design of the cylinder cover for 15 % better extraction. - Lever for lifting the table when sanding wide workpieces. - Rigid cylinder adjustment. - Intelligent feed deceleration for larger material removal. - Supplied with base and crown 80 sanding belt. Developed by professionals for demanding workshops, smooth operation, narrow or wide workpieces, precise sanding and quick adjustments. - Type: 1632 SuperMax - Recommended use: Professional production - Power (230 V): 1.1 kW Ijdpfx Asqv D Uujg Dsa - Feed belt motor: 40 W - Speed: 1420 rpm - Cylinder diameter: 127 mm - Feed speed: 0-3 m/min. - Workpiece thickness min/max: 0.8 - 76 mm - Max. workpiece width: 406 (812) mm - Sanding belt width: 76 mm - Extraction: 100 mm - Minimum air flow: 1000 m3/hour - Length × width × height: 860 × 560 × 1220 mm - Weight: 62 kg - Packaging dimensions: 940 × 660 × 550 mm - Weight incl. packaging 71.7 kg Scope of delivery: - Base frame - Sanding belt, crowning 80

Condition: used, Year of construction: 1995, operating hours: 24,142 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 10,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, type of input current: three-phase, workpiece weight (max.): 1,500 kg, spindle motor power: 7,500 W, controller manufacturer: Heidenhain, controller model: TNC 360, For sale is a Lagun CNC milling machine, year of manufacture 1995, with 24,150 operating hours. Technical data: - Control: Heidenhain TNC360 - X-axis: 1100 mm - Y-axis: 600 mm - Z-axis: 600 mm - Table size: 1200 mm x 550 mm - Spindle taper: ISO50 BT40 - Speed range: 50–3000 rpm - Rapid traverse: 10,000 mm/min The machine is equipped with a manual universal milling head and an enclosure. Ijdoxmhaiepfx Ag Dea The machine is in running condition and can be inspected under power.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic KLT Container Washer, Tray Washer, Continuous Cleaning Machine for Various Components - Washing - Rinsing - Degreasing - Drying - 2 lanes - 2 x 600 KLT/hour - External heating - Possibility of transport, dismantling, and loading Suitable for boxes, KLT inserts, and lids – continuous throughfeed washing system. Maximum throughput width: 300 mm Maximum throughput height: 650 mm Contaminants: Dust, mineral grease, mineral oil, metal chips System Description The system and piping are made of high-quality stainless steel, ensuring a long service life. The machine is a two-lane chain continuous washing system. Its unique modular design allows for expansion of an existing system at any time, guaranteeing that the plant will not become too small. The system can grow as the operation expands or as requirements increase. Hot water heating: Heat exchanger in the washing tanks for the heating circuit. Recommended supply temperature 90°C Nozzle pipes: Screwed Oil separator: Three-phase separator with pneumatic diaphragm pump and pre-filter on all tanks. Workpiece counter on both lanes. System features: - Stainless steel infeed module - Stainless steel washing module 1 - Stainless steel washing module 2 - Stainless steel cold air blower - Stainless steel warm air drying module - Stainless steel warm air drying module - Stainless steel outfeed module - Transport system - Continuously adjustable transport speed drive - Heating: Tube heat exchanger in the washing tanks - Control cabinet with electric control system - Assembly and cleaning doors on both sides of the plant - Thermal insulation of washing tanks and sound insulation of fans Technical Data: Overall dimensions: Length: 12,350 mm Width: 1,950 mm (2 lanes) Height: 2,800 mm (total height incl. fans) Electrical power for washing: Wash pumps 1: 7.50 kW 7.50 kW Wash pumps 2: 7.50 kW 7.50 kW Cold air blower: 5.50 kW 5.50 kW Warm air blower 1: 2x Warm air blower 2: 2x Warm air heating register: 4x Drive: x 0.55 kW 0.55 kW Exhaust air fan: 3.00 kW 3.00 kW Voltage: 400 V Frequency: 50 Hz Protection class: IP 55 Iodpowi Nl Iefx Ag Dsa The system control cabinet is located next to the machine. The control cabinet contains the required components for system operation and monitoring.

Condition: new, functionality: fully functional, power: 80.9 kW (109.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,000 kg, empty load weight: 8,000 kg, operation weight: 8,000 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 2,800 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Excavator Loader GG30BC Excavator Loader The GG30BC excavator loader is a robust and reliable machine designed for construction and industrial applications. With a loading capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, with a width of 2,200 mm and a capacity of 1.3 m³, ensures fast and effective loading. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). The mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, providing optimal control of the vehicle. The maximum travel speed is 24 km/h, enabling efficient transportation around the jobsite. Hydraulics and Brake System The advanced hydraulic system operates at a pressure of 22 MPa and delivers a digging force of 46.5 kN for the grab and 31 kN for the bucket. The standard digging depth is 4,000 mm, extendable to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic braking system including an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC provides a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. The maximum tractive force is 39 kN, and the breakout force is 38 kN. A minimum ground clearance of 300 mm ensures excellent performance on challenging terrain. The machine dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 Rated power: 81 kW (110 hp) Operating weight: 8,000 kg Loading capacity: 2,500 kg Transmission type: Mechanical transmission with fixed power drive Gears: 2 forward / 2 reverse Maximum speed: 24 km/h Tyres: (F) 14-17.5 (R) 19.5L-24 Steering brand: FEICHENG YUNYU Steering system working pressure: 12 Pa Front tyre pressure: 0.22 MPa Main transmission type: Reduction Final drive: Single-stage final reducer Brake system control: Pneumatic brake clamp over oil, external, self-regulating, self-balancing Hydraulic system pressure: 22 MPa Digging force (grab): 46.5 kN Digging force (bucket): 31 kN Iodpfxsxr Ru Ho Ag Dea Brake type: Self-levelling Emergency brake control: Manual – parking brake with end force Bucket capacity: 1.3 m³ Bucket width: 2,200 mm Dipper bucket capacity: 620 mm Loader dump height: 2,800 mm Loader dump reach: 1,062 mm Maximum digging depth: 4,000 mm Optional digging depth: 5,000–5,500 mm (with telescopic arm) Minimum turning radius: 6,581 mm Digging arm swing angle: 190° Maximum tractive force: 39 kN Breakout force: 38 kN Minimum ground clearance: 300 mm Wheelbase: 2,250 mm Steering angle: ±36° Working pressure: 12 MPa Length: 7,600 mm Width: 2,260 mm Height: 2,890 mm

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Ijdexpfy Eepfx Ag Dsa Table size: 1100 x 250 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, position of the milling head: 2.5º x 2.5º, spindle speed (max.): 4,000 rpm, table width: 1,000 mm, table load: 7,000 kg, table length: 4,100 mm, BED TYPE MILLING MACHINE LAGUN GBR 4 (GORATU) TECHNICAL SPECIFICATIONS Manufacturer: Lagun Goratu Model: GBR-4 Year: 2016 CNC: Heidenhain iTNC 530 Spindle hours: 6000h Table: 4100 x 1000 mm Max weight: 7000 kg X/Y/Z travel: 4000/1200/1500 mm Spindle taper: ISO 50 / 4000 rpm Internal coolant: 30 Bar Automatic head: 2.5º x 2.5º Tool magazine: 24 ATC PRICE AND FURTHER INFORMATION ON REQUEST Isdpfsxuglyox Ag Dea (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: new, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 14,000 kg, table length: 5,100 mm, overall weight: 35,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW BED TYPE MILLING MACHINE Control and motors: Iodpfxoq Ixh Ho Ag Doa HEIDENHAIN TNC 640 digital CNC control HEIDENHAIN package (motors, measuring systems, and handwheel) IKZ: Internal coolant supply – 36 bar Additional equipment: Standard tool changer with double gripper, 40 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear 4th axis preparation (rotary table) Perimetric enclosure Accuracies: Positioning accuracy: 0.025 mm Repeatability: 0.008 mm Only inquiries from Germany will be answered.

Condition: new, Year of construction: 2024, We offer very flexible CNC Pallet nailing machines designed for production most kinds of pallets Machine available in 2 versions 1. Palletmax it is double table CNC Nailing Machine Isdpfetk Dghsx Ag Dja 2. Palletstar it is delta-triple table CNC Nailing Machine with stacking robot. Also for pallets 2600mm length. - Easy and quick change system and training for new pallet. - Standard and adjustable templates. - Easy maintenance and low costs - High capacity . - Short production period.

Condition: ready for operation (used), 2 piece Güntner Condenser with Axial Fan. 2 pieces of condenser. The price shown is for 1 piece of condenser! Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vácegres, Hungary (EU) Iedpjxyyt Ijfx Ag Dsa

Condition: good (used), Year of construction: 2009, Ref. -No.: 10521 Manufacturer: LAGUN Ijdpfx Agjxc Tttj Dsa Type: CM 6 Year of construction: 2009 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 6000 mm Y-Travel: 1200 mm Z-Travel: 2000 mm C-Axis: 0,001 ° Rapid Traverse X/Y/Z: 30 m / min Table surface area (LxW): 7500 x 1100 mm Tool changer: 60 Drive power spindle: 60 kW Table load max.: 5.000 kg Tool Taper: SK 50 Spindle Speeds: 6.000 RPM Further information: Automatic universal swivel head 1° x 1° incl. accessories, tools, holders 4th axis preparation (rotary table) Positioning accuracy: ± 0.030 mm Repeat accuracy: ± 0.010 mm Machine is in production and can be inspected under power at any time.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 345 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,750 rpm, spindle speed (min.): 50 rpm, table length: 1,370 mm, table width: 280 mm, overall weight: 1,500 kg, Spindle taper: ISO 40 RPM.: 50-3750 (trinløs). Travel: X800 Y345 Z400 mm. Iodpfjxn R Tzex Ag Doa Table size: 1370 x 280 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 4 HP. Digital readout: Fagor, 3-axis Year: 2002 Country of origin: Spain. Size (L x W x H): 2000 x 2000 x 2350 mm. Weight: 1500 kg. Travel ram: 570 mm. With stepless spindle speed, motorized tool clamping, pneumatic spindle brake, drilling function in head with automatic feed and misc. tools. All our machines are tested and serviced before delivery.

Condition: used, functionality: fully functional, travel distance X-axis: 900 mm, feed length X-axis: 900 mm, Lagun FTV4 turret milling machine, variable speed head, 1370 x 280 mm table, long travel 900 mm, transv 345, vert 400, ram travel 570 mm, quill travel 100 mm, iso 40 taper, automatic and rapid table travel, head speed 50-2800 eprm, head power 3 hp, has a dimension display and hydraulic clamp, divider, cone and collets, machine in good condition. Iedpfxsv Rng Ie Ag Dsa

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, torque: 1,178 Nm, coolant supply: 36 bar, Equipment: documentation/manual, rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Work Table: Plate table / rotary table / pendulum machining (depending on configuration) Ijdshy Au Ispfx Ag Dea Additional Equipment: Tool changer with double gripper, 40 stations Hinged belt chip conveyor (longitudinal) Work table per customer specification: plate table / rotary table / pendulum machining Accuracies: Positioning accuracy: ±0.030 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system Iodpfx Agouq Iy Re Dea for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Photo is from another system as mine is still packed

Condition: ready for operation (used), Güntner Axial Ventilator Condenser. Also suitable for water cooling. Other sizes of vertical and horizontal condensers are available (also suitable for water cooling, pictures can be found in the ad) Locally located in Vácegres. Ijdpfjxyykysx Ag Dea

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 35 rpm, overall weight: 2,600 kg, table length: 1,525 mm, table width: 325 mm, Spindle taper: ISO 50 RPM.: 35-1800 variable. Travel: X1050 Y330 Z475 mm. Table size: 1525 x 325 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5,5 kW. Digital readout: Fagor Innova (Z). Year: 2002 Country of origin: Spain. Size (L x W x H): 2400 x 2500 x 2200 mm. Weight: 2600 kg. Variable speed in 2 gears. Iedpfsxn R Tnsx Ag Dsa All our machines are tested and serviced before delivery.