Used Multimaster Cas 52 for sale (21,304)

Condition: good (used), Year of construction: 2002, width 52 cm age 2002 automatic paper folding machine computer control with monitor flat pile feeder FSA 52 with suction head 1. station: 4 folding pockets 52 cm following knife shaft 2. station: 4 folding pockets 52 cm Hedpfjvphm Sjx Aacsfn 3. station: 2 folding pockets 38 cm stream delivery Delivery Time: shortly

Condition: refurbished (used), Year of construction: 2003, Completely overhauled folding machine, built in 2002, in absolutely mint condition. Counter reading: 23 million, rollers in mint condition. Formats: min: 110 x 100 mm, max: 520 x 850 mm Smallest folding length: 35 mm, 60 jobs can be stored. First folding unit: 4 automatic buckle plates, automatic roller and stop adjustment. Steel segment rollers, mint condition. FSA flat pile feeder with side blower. Pico compressor. Intermittent AM 52 delivery. Bridge. 380 volts / 16 A. All maintenance-free three-phase motors. Original pictures. Machine is in our demonstration room. Can be inspected and tested at any time. Hjdpfx Aaewctuyecefn 1-year warranty on electrical components. Available: immediately.

Condition: good (used), Year of construction: 2006, max. size 38 x 65 cm age 2006 computer control with monitor flat pile feeder with suction head 4 folding pockets in the parallel fold section Hfjdpfxst T Nc Es Aacjn automatic pocket setting following knife shaft stream delivery Delivery time: immediatelly from stock

Condition: used, Year of construction: 2001, The Mathias Baeuerle CAS 52-B is a sophisticated and efficient folding machine designed for precise and automated folding tasks. Manufactured in 2001, this machine is currently in stock and located in Germany. It features four plates in the first unit and automatic fold plate setting, ensuring accurate and consistent folding. The CAS 52-B is equipped with automatic paper thickness measurement, a control panel with seven pre-programmed standard folds, and electrical double-sheet control to prevent errors. It includes a flat pile feeder for smooth material handling and a MB CAS 52 Multimaster computer-controlled folder, which allows for precise and repeatable folding operations. With a memory capacity for 60 repetitive jobs, the machine can efficiently handle high-volume tasks. The CAS 52-B also features semi-automatic fold roller setting and mobile delivery, enhancing its versatility and ease of use. It can accommodate materials with a size of 520 x 850 mm. Format: 520 x 850 mm Equipment: Hedpowdww Uefx Aacjfn 4 Plates 1st Unit Automatic Fold Plate Setting Automatic Paper Thickness Measurement Control Panel 7 Pre-programmed Standard Folds Electrical double-sheet- control Flat pile feeder MB CAS 52 Multimaster Computer Controlled Folder Memory for 60 Repetitive Jobs Mobile delivery Semi Automatic Fold Roller Setting

Condition: good (used), Year of construction: 2009, functionality: fully functional, The machine is fully operational and equipped with an MB CAS AM52 delivery table (short). In continuous use. Hfsdpfx Aoxcwb Usacen

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, For sale is an MB Bäuerle folding system from 2013. The machine is currently running reliably in our production and is in good condition. An identical system is also in stock and available. Spare parts for the folding system are also in stock and can be purchased as needed. The entire installation consists of several machines, which you will find in our other listings. If you are interested, we welcome your inquiry to arrange a viewing appointment. Price on request. Hjdpfxow Hqhxo Aacsfn

Condition: refurbished (used), Year of construction: 2004, Folding machine with super equipment First folding unit with 4 buckle plates and very good reconditioned steel segment rollers Second folding unit with 4 buckle plates and very good overhauled steel segment rollers Rollers were replaced in both units 6 million years ago Automatic buckle plates, stop and roller adjustment Formats: Min.: 100 x 120 mm, Max: 520 x 580 mm, smallest fold length 35 mm FSA flat pile feeder Sheet travel monitoring, Double sheet control, 60 jobs can be stored Shingle delivery, running performance 30 million Hfedjum Iz Hspfx Aacen New sound insulation Built 2004 Machine is well maintained Machine is completely overhauled - was serviced by us for 10 years

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Hfjdsd Hx E Ispfx Aacon Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: new, -Large planing tables made of gray cast iron -The planing table is adjusted using a precise parallelogram system, ensuring that the distance between the table tips and the cutter block remains constant in every adjustment position. -The large, sturdy planing stop made of anodized aluminum is easily movable and can be tilted from 0° to 45°. -The angle of the stop can be read from the workstation. -Comes with auxiliary stop as standard. -Large four-knife block with precision bearings. -Smooth operation thanks to the precision unit and the heavy-duty cast iron construction. -Powerful industrial motor. -Maximum user safety with simple operation. -Scale display for chip removal. -Manual table adjustment. -Motor protection switch. Equipment details. -Incl. Foldable auxiliary stop for narrow workpieces -Manual quick adjustment of the chip removal with scale & clamping head The guard -The guard is foldable and designed to not hinder the operator while working, while simultaneously protecting them. TERSA models with Tersa planer knife shaft system -No more adjustments or screwing -Planer knife changes in seconds -Self-locking -Extremely quiet -Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2750 mm - Width/depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Planer: - Total length of tables: 2720 mm - Work table length: 1498 mm - Maximum chip removal for planer: 8 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2750 mm - Space required (width/depth): 1604 mm - Explanation Space requirements: The dimensions take into account maximum travel distances or usable lengths. Electrical specifications: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: Hodpfx Aaju T Hrcscefn - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm

Condition: new, Year of construction: 2024, Item number 5220053 Large dressing tables made of gray cast iron The dressing table is adjusted using a precise parallelogram system so that the distance between the table tips and the cutterhead remains the same in any adjustment position The large, stable dressing fence made of anodized aluminium is easy to move and can be tilted from 0° - 45° The inclination of the fence can be read from the workstation With auxiliary fence as standard Dimensions and weights Length approx. 2750 mm Width/depth approx. 1500 mm Weight approx. 680 kg Jointer Feeding table length 1498 mm Chip removal max. 8 mm Swivel range dressing fence 90 - 45 ° Suction connection Suction nozzle diameter Thickness 120 mm Electrical data Power drive motor 7 kW Supply voltage 400 V Mains frequency 50 Hz Planing cutterblock Type TERSA Number of planing knives 4 pcs Speed 5000 min¯¹ Planing width max. 520 mm Large four-blade shaft, precision bearings Smooth running thanks to precision unit and heavy cast design Powerful industrial motor Maximum user safety with extremely simple operation Scale display for chip removal Manual table adjustment Motor protection switch Hedpfjtu Ubkex Aacjfn Equipment details incl. fold-down auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale & clamping rotary head The safety guard The safety guard can be folded down and has been designed so that the operator is not hindered during work and is protected at the same time TERSA models with Tersa cutterblock system No more adjusting and screwing Planer blade change in seconds Self-locking Particularly quiet Perfect planing result

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Hfodogr Udvopfx Aacsn Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: used, Year of construction: 2021, Used machine Year of manufacture 2021 As good as new Equipment and technical specifications: Total table length 2720mm Task table length 1498mm Maximum chip removal 8mm Joining stop length 1200mm Joining stop height 190mm Joining stop swivel range 90° - 45° Extraction connection: Extraction nozzle diameter thickness 120mm Installation information: Space required length 2750mm Space required width/depth 1604mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Electrical Data: Drive motor power: 7 kW Connection voltage: 400 V Line frequency: 50 Hz Planer block Planer block type: TERSA Planer block diameter: 120 mm Number of planer blades: 4 Planer block speed: 5000 rpm Planing width: max. 520 mm Dimensions and weights: Length: approx. 2750 mm Width/depth: approx. 1500 mm Weight: approx. 720 kg Availability: Short-term Hsdewka Txopfx Aacofn Storage location: Flörsheim

Condition: new, Year of construction: 2025, Large dressing tables made of grey cast iron The dressing table is adjusted via a precise parallelogram system so that the distance between the table tips and the cutter head remains the same in every adjustment position The large, stable dressing fence made of anodised aluminium is easy to move and can be tilted from 0° - 45 The inclination of the fence can be read from the workstation With auxiliary stop as standard Large four-blade shaft, precision bearing Smooth running due to precision unit and thanks to the heavy cast iron design Powerful industrial engine Highest possible user safety with simplest operation Display for chip removal via scale Manual table adjustment Motor protection switch Equipment details incl. fold-down auxiliary stop for narrow workpieces Manual quick adjustment of the chip removal with scale & clamping head The protection device The safety guard is foldable and designed to protect the operator without obstructing the work Models TERSA with Tersa planer knife shaft system No more adjusting and screwing Planer knife change in seconds Self locking Especially low noise Perfect planing result Dimensions and weights Length approx. 2750 mm width/depth approx. 1500 mm Weight approx. 680 kg Dresser Total length of the tables 2720 mm Feed table length 1498 mm Chip removal max. 8 mm Stop length 1200 mm Hsdpoff Efcefx Aacofn Stop height 190 mm Swivel range of dressing stop 90 - 45 ° Dust extraction connection Suction nozzle diameter Thickness

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Equipment and technical data: Dimensions and weights Length (product) ca. 1170mm Weight (net) approx. 660kg width/depth (product) ca. 1003mm Connection suction Suction port diameter thickness 150mm Installation information Space requirement length 1170mm Machine body width/depth 705mm Space requirement width/depth 1003mm Working area length 1000mm Space requirement height 1197mm Working area width/depth 2000mm Hfedpokwg Unofx Aacjn Explanation of space requirement The dimensions take into account maximum travels or useful clearance to working area. Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Machine body length 1170mm Thickness Thickness table length 520mm Working height thickness max. 250mm Thickness table width 1000mm working length thickness min. 210mm Working height thickness min. 3.5mm Chip removal max. thickness 8mm Electrical data Power drive motor 7,5kW Mains frequency 50Hz Supply voltage 400V Planer shaft type TERSA Planer shaft speed 4500min¯¹ Planing shaft diameter: 120mm max. planing width: 520mm Number of planing knives: 4pcs. Feeding speed: 5/8/12/18m/min Location: Hochheim Availability: Short term

Condition: used, Year of construction: 1995, MB Bäuerle multipli CAS-524 Folding Machine, Used The MB Bäuerle multipli CAS-524 is a reliable folding machine for print shops and binderies. It's an older model that offers good performance at a lower cost. Key Features: - 4 folding pockets for various folding types Hsdpfx Aaow Eu Rzecjfn - Automatic pocket adjustment for quick job changes - Vacuum feeder for reliable paper feeding - Integrated perforating unit for additional options - Suitable for different paper types and weights Technical Specifications: - Max paper size: 520 x 720 mm - Min paper size: 100 x 120 mm - Paper weight: 40 - 250 g/m² - Folding speed: up to 40,000 sheets/hour - Power: 400 V, 50 Hz - Size (L x W x H): about 2,100 x 650 x 1,250 mm - Weight: about 750 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Hjdov Di Srjpfx Aacsfn Equipment: 4 buckle plates vertical pile feeder 1 Knife

Condition: good (used), Year of construction: 2001, MB Baeuerle Multipli CAS-524 flat pile feeder 4 buckle plates noise reduction hoods delivery conveyor belt Hfjdpfx Ajh Ighheacen

Condition: used, machine/vehicle number: 78261, Folding machine MB multipli-cas 524 Serial-No. 78261 Online-Video-Inspection by Skype-Video Hedpfx Aash Axynscsfn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), functionality: fully functional, mileage: 28,400 km, power: 103 kW (140.04 HP), fuel type: diesel, maximum load weight: 980 kg, first registration: 04/2022, next inspection (TÜV): 04/2026, color: white, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, car registration, central locking, electronic stability program (ESP), immobilizer system, onboard computer, PEUGEOT BOXER 435 L4 2.2 BlueHDi 140cv ALUMINUM BODY Hfodpfx Ajwmxdbsacon NATIONAL COMPANY VEHICLE - SINGLE OWNER - MANUAL AIR CONDITIONING WITH REFRIGERATED FRONT DRAWER DOUBLE-LAYER REINFORCED REAR SUSPENSION DAB FM RADIO WITH BLUETOOTH LOAD CAPACITY 980 KG VAT DISPLAYED: €20,400.00 + VAT 22% = €24,888.00 POSSIBILITY OF CUSTOM FINANCING EVEN WITHOUT ADVANCE PAYMENT, EVEN WITH MINI-INSTALLMENTS AND MAXIMUM INSTALLMENTS, UP TO 96 MONTHS POSSIBILITY OF EXCHANGES AND SCRAPPING

Condition: new, Year of construction: 2025, CASADEI PF 520 M Tersa - Professional planer with 520 mm planing width and motorized adjustment of the planing table. large dimensioned jointer tables made of grey cast iron, hardened and tempered sturdy cast steel construction for precision and longevity the stable dressing fence is easily movable and offers a large supporting surface large dressing fence, inclinable 90° - 45 the inclination of the fence can be easily read from the workplace standard with auxiliary fence large four-blade shaft, precision bearing mounted smooth running due to precision unit and heavy cast iron construction powerful 7,0 kW (S6) motor maximum user safety with simplest operation Scope of delivery: PF 520 M Tersa Swivelling auxiliary fence TX-Matic planing shaft protection device Reinforced main motor 7,0 kW Technical data Total length of the planing tables 2960 mm Planing width 520 mm Dimensions planing fence 1100 x 160 mm Swivel range planing fence 90 - 45 Max. chip removal chip removal 8 mm Planing shaft Ø / number of planing knives 120 mm / 4 pcs. Speed 5000 1/min Motor power 400 V / 50 Hz / P2 / S1 7,0 kW (9,0 PS) Suction nozzle diameter 120 mm Weight Location: ex stock Bitburg Immediately available Hfedpeb D Sblofx Aacsn

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm Hedpfx Aasxnqyhecefn - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, -Sturdy steel and gray cast iron construction -Large, ribbed gray cast iron planing tables -Smooth operation due to high weight -Four feed speeds -Motorized thicknessing table lift with two speeds and digital display -Articulated pressure bar in the infeed -Precision-mounted four-knife shaft Hodpfou T Hq Ssx Aacofn -Helical-toothed steel feed roller for particularly even and gentle wood feed -Rubber-coated feed roller -Large planing stop, tiltable from 90 to +45° -Standard auxiliary stop -Powerful industrial motor -Pneumatic quick-change system with pneumatic raising and lowering of the planing table -The extraction connection position is always in the same place for both planing and thicknessing, eliminating the need for an additional extraction hose or the need for cumbersome reconnection and repositioning around the machine required Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product) approx.: 2300 mm - Width/depth (product) approx.: 1100 mm - Weight (net) approx.: 980 kg Planer: - Total length of tables: 2300 mm - Work table length: 1200 mm - Planer table width: 520 mm - Working height: 930 mm - Max. chip removal for planer: 6 mm - Planer stop length: 1200 mm - Planer stop height: 190 mm - Planer stop swivel range: 90 – 45 ° Extraction connection: - Extractor nozzle diameter (thickness): 120 mm Installation information: - Space required (length): 2300 mm - Space requirement width/depth: 1610 mm - Explanation of space requirement: The dimensions take into account the maximum travel distances or usable lengths. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness: - Thickness table width: 520 mm - Minimum working height (thickness): 3.5 mm - Maximum working height (thickness): 250 mm - Maximum chip removal (thickness): 8 mm Electrical data: - Drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer block: - Planer block type: TERSA - Planer block diameter: 120 mm - Number of planer knives: 4 - Planer block speed: 5000 rpm - Maximum planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Hfodpfx Aew I U Nujacen Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: new, Year of construction: 2022, planing width: 520 mm planing shaft type: tersa number of blades: 4 sourface table length: 3000 mm table adjustment: electrically read out table height: digital sourface fence adjustable: yes motor power: 7 kW suction connection: 120 mm machine length: 3005 mm machine width: 1460 mm Hfjdpfx Asiqg Nwjacen weight: 870 kg

Condition: new, Year of construction: 2025, CASADEI PFS 520 - Surface planer with 520 mm planing width and motorized thicknessing table adjustment Sturdy cast iron construction Large, ribbed planing tables made of grey cast iron, annealed against distortion Smooth running due to high dead weight Four feed speeds Motorized thicknessing table stroke with two speeds and digital display Link pressure shoes in the infeed 4-blade shaft, precision bearing mounted Hsdsbxz S Hjpfx Aacofn Sharp toothed steel feed roller for particularly even and gentle wood feed Extraction roller with rubber coating Large dressing fence, inclinable 90°- 45° readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa planing cutter Change of planing knives in seconds When starting the machine, the planing knives are automatically clamped by the centrifugal force - self-locking The knife protrusion adjusts automatically without adjustment and screwing The planing table is adjusted by a stable and precisely guided parallelogram system, so that the distance of the table tips to the cutter head remains the same in every adjustment position. The sturdy aluminium dressing fence is anodised as standard, easily adjustable and offers a large contact surface. The adjustable inclination from 90° to 45° is easy to read from the workstation. Standard with auxiliary fence for safe planing even of narrow workpieces Fig. with optional equipment The connection position of the suction i