Used Moulder for sale (676)

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Spindle bottom 7,5 kW Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW with planing heads with milling tools Gksdperigq Sjfx Acmjd with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw Gksdjhlp D Nspfx Acmsd The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Year of construction: 1990, condition: excellent (used), Weinig Profimat 22 four-side planer - max planing width 23 cm - maximum planing height 13 cm - bottom, right and left by one motor, universal - stepless regulation of the feed speed - all spindles can be adjusted vertically and horizontally - 4 spiral heads The machine is in very good condition. Godpohx Ncdjfx Acmekd

Condition: used, machine/vehicle number: 190667 W 10, functionality: unexamined, power: 4.5 kW (6.12 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, spindle diameter: 30 mm, Schelling stationary table milling machine, type FZ-4, Milling spindle D = 30 mm, Max. clamping length 140 mm, Max. height adjustment 100 mm, Motor approx. 4.5 kW, Godpfo Af Ux Ajx Acmjkd Table size 1100 x 900 mm, Table height 860 mm, Weight approx. 740 kg, Incl. Holzkraft 3-roller feed system, As inspected at the Seevetal location, Ex works, excluding transport, Subject to prior sale.

Condition: good (used), Year of construction: 1985, Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm Gedpfx Ajcnpxnjcmokd -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Condition: ready for operation (used), Year of construction: 1990, MARKON Log house drilling machine with undercutter year 1990 manufacture Markon Lathi / Finland Length = 3550mm Width= 1500mm Gedpfofw Rt Rsx Acmskd Height= 2910mm Engine power Drilling unit: 6 x 3 kW moulder: 1 x 5.5 kW Dimensions of the log to be pushed Height max 250mm Height min 130mm Width max 250mm Width min 60mm Length min 600mm Tool sizes and speeds Drill max diameter 40 mm Moulder max diameter 250 mm Drill length 325 mm Drill mounting arm diameter 20h7 mm Drill rotation speed 2880 rpm Moulder: rotation speed 2880 rpm AIR Suction openings dia. 160 mm 2 suction openings Drill unit suction opening diameter 90 mm Suction openings 6 pcs Air speed at the suction opening 30 m / s Air consumption 8460 m3 / h electrical connection Total power 380 V 24 kW Compressed air connection Minimum pressure 6 bar Drilling unit air demand / stroke "48 1 Total air demand ~ 2200 1 / min incl. 3,5 meter roller conveyor + 12 drillings

Year of construction: 2026, condition: new, - With 5 spindels - Grooved table for short pieces Outstanding characteristics: Sealed safety hood to reduce noise levels and prevent chips from splash Adopting stepless variable feed speed, inverter feed speed of 6- 30 m/min Each spindle driven by independence motor with powerful cutting To fit with heavy – duty cutting as equipping with two pairs of high precision bearing at two ends of spindle assembly Centralized spindle adjustment on the front panel is easy to work Hard Chromed electro plated treatment has been adopted for the durability of the work table surface Short feeding device is equiped for smooth feed avaliably Bottom driving roller to improve feeding performance Pneumatic pressure feed wheel can be seperately adjusted, make for feed pieces with various thickness Manual oil pump to lubricate the working tables and slides, to be easy to centralized control Pre- trimming cutter on the first bottom shaft and teethed work table was designed to reduce the noise level effectively and cut out the precise linearity Removable work table of vertical spindle was designed of dust proof of efectively protect the screw bar from pollution Special hardness treatment of HRC 58 has been adopted on the work table beside of the first bottom spindle for increasing the durability and natural life of the work table surface Adopting electric component from international class with steady quality TECHNICAL SPECIFICATIONS: - Working width (min): 20 mm Gkodpfxogp Dcqo Acmjd - Working width (max): 240 mm - Working thickness (min): 8 mm - Working thickness (max): 180 mm - Number of spindels: 5 kos - spindle speed: 6000 r/min - Diameter of Spindle: 40 mm INSTALLED CUTTER-BLOCKS (from first to last): - first bottom spindle: diameter 108- 145 mm - right spindle: diameter 108- 200 mm - left spindle: diameter 108 -200 mm - first top spindle: diameter 108- 200 mm - second bottom spindle: diameter 108- 200 mm MOTOR POWER: - first bottom spindle 5,5 KW (7,5 HP) - right spindle 5,5 KW (7,5 HP) - left spindle 7,5 KW (10 HP) - first top spindle 7,5 KW (10 HP) - second bottom spindle 7,5 KW (10 HP)

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm Gksdpfxsh Nvyze Acmod -Weight: 962 kg

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Revolutions: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Working table dimensions: 300x1100 mm Adjustable culagi arms Engine power: 5.5 kW Power supply: 380 V Producer: Casadei Overall dimensions: Godpfx Acsh Dzxzsmokd Length: 1170 mm Width: 800 mm Height: 1230 mm

Condition: used, Technical specifications: Spindle diameter: 30 mm Spindle height: 160 mm Swiveling spindle: -10° - 45° Gjdpjzd Ap Tsfx Acmjkd Speeds: 3000/4500/6000/8000/10000 rpm Manual adjustment of spindle height and angle Spindle lock Work table dimensions: 760/2500 x 1000/1500 mm Adjustable support arms Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1500 mm Width: 2500 mm Height: 1350 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Gjdezlw Rnjpfx Acmekd Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: used, Year of construction: 2011, Working width: 20–230 mm Working height: 8–120 mm Feed system • Variable-frequency controlled feed drive: 5–30 m/min, continuously adjustable, with 7 kW (9.5 HP) brake motor. • Pneumatically controlled up/down infeed roller before the 1st bottom spindle. • Axial adjustment range of the feed rollers relative to the left spindle: 35 mm. • Extended pendulum axis opposite the left spindles to 150 mm. • Reduced roller spacing in the area of the right-hand spindles. Machine frame, tables and fences • 2 m long jointing table (including jointing fence). Gjdpfxjzkklps Acmjkd • Grooved guide for short or difficult-to-feed workpieces, coated with Marathon PowerCoating. Table tops are non-removable. o Minimum working width: 25 mm o Maximum stock removal at the 1st bottom spindle: 7 mm • Manual lubrication pump. • One driven, hardened outfeed table roller, 210 mm wide. • One driven, hardened machine table roller, 210 mm wide. Pressure elements and guides • Spring-loaded top pressure rollers. • Anti-kickback device before the top spindle for short workpieces. Machine operation • Memory function for storing profile setup data. • EasyCom for quick and easy setup of the moulder and planer. • Storage for up to 1,000 profile programs, including tool data. • Reduced setup times. • Convenient and safe operation. • Basic equipment prepared for CNC-controlled adjustment and positioning. • 2 CNC-controlled radial adjustment and positioning axes for tool spindles No. 4 and No. 5, in conjunction with the Memory function or EasyCom. • CNC-controlled feed height adjustment (up/down) in conjunction with the Memory function. • Mobil- tool spindle (1 axis): automatic adjustment of the left spindle to different workpiece widths. • Centralized lubrication points located at the front of the machine. • Electromagnetic locking of the safety hood. • One internal light inside the safety hood. Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: good (used), SCM P64 Four-Sided Planer - Planing width 18 cm - Planing height 12 cm - Cutterhead set, standard cutters - 2 feed speeds - Electric height adjustment for the upper planing head and feed rollers - All spindles are adjustable vertically and horizontally Machine in very good condition. Gsdozv Scaepfx Acmokd

Condition: excellent (used), Year of construction: 2001, Weinig A1 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Gedpfozwmk Uox Acmokd Machine nr 92781 Suitable for boards from 1.8m to 6.1m long. Video is only for explanation purposes

Condition: used, Year of construction: 1991, Design: fixed Table size: 1200x730 mm Godjz Nnyyjpfx Acmokd Table height: 900 mm Spindle speeds: 3000/4500/6000/7000/10000 rpm Milling cutter diameter: 30 mm Spindle working length: 180 mm Spindle direction: right/left Speed display: optical Automatic motor brake: mechanical foot brake Design of fence jaws: Aigner fence system Fence adjustment: manual Display of milling fence: none Feed mechanism: with 3 rollers Control panel position: bottom Weight approx.: 600 kg Motor power: 4 kW Dust extraction diameter: 120/120 mm Location: Rieth

Condition: excellent (used), Workpiece dimensions: Data Workpiece length = 260-3000 mm Working width = 50-230 mm Working height = 10-70mm Cross conveyor table specification: Conveyor length = 2200 mm Conveyor width = 1000mm Adjustable overall height = 810 mm Number of flat crossfeed chains= 5 ( 80mm, 280mm, 500mm, 900mm and 2200mm) Feed speed = 18 m/min Feed motor = 0.75 kW (1 hp) Accelerator specification: Feed roller width = +/- 50 mm Driven feed rollers = 4pcs (2 top, 2 bottom) Feed motor, hydraulic = 5.5kW Feed roller diameter = 170mm upper and 100 mm lower Gedjz An Skopfx Acmskd Infeed speed infinitely variable = 20-140 m/min Max.cycle rate/min. = 60

Condition: used, Year of construction: 2022, Overview SMI ECOBLOC ERGON 6-20-5 HC EV blow moulder-filler-capper combiblock for still mineral water in 6.0 L PET bottles, max. 6,000 bottles/h. Built in 2022, started up in 2023 and run only 3 to 4 times a year. The complete downstream line (handle application, labelling, robot palletizing) is also on offer. Technical data - Year of manufacture: 2022, start-up 2023 - Capacity: max. 6,000 bottles/h - Product: still mineral water - Container: 6.0 L PET bottle - Preform: 100% rPET, 86.5 g - Closure: 48/41 cap Equipment - SMI blow moulder for 6 moulds - Filler with 20 filling valves - Capper with 5 capping heads - Cap sorter and cap elevator - Pressco control system for preform and neck inspection, integrated in the combiblock Not included Blow moulds, preform and cap feeding from the pallet tipper to the hoppers, high-pressure compressor for the blow moulder. Condition As-new condition, low operating hours. Annual preventive maintenance by the OEM plus regular in-house maintenance. In production until the end of April 2026 and still installed; dry run on request, inspection by appointment. Electrical and mechanical drawings, PLC programs with backups, service and maintenance manuals and spare parts books are included. Gkedpfx Acsz Hcb Eemjd Availability From October 2026; the machine must be dismantled by the end of October 2026. Dismantling, packing and truck loading can be arranged on request. Location: France.

Condition: excellent (used), LECEB S300 HIGH SPEED MOULDER INFEED CAPABLE OF FEEDING LONG AND SHORT BOARDS AT HIGH SPEED UP TO 3OOM/MIN+ Gedpfezmmrqjx Acmekd SUITABLE FOR FEEDING SHORT LENGTHS DOWN TO 2.05M WITHOUT LOSS OF EFFICIENCY SUITABLE FOR LENGTHS UP TO 6.0M SUITABLE FOR THICKNESS FROM 8MM+ SUITABLE FOR RECEIVING RESAWN BOARDS WHICH CAN BE AUTOMATICALLY LOADED TO THE MAGAZINE FOR HIGH SPEED FEEDING VERY SUITABLE FOR USE IN BETWEEN SPLITTING SAW MOULDER (OR RESAW) AND HIGH SPEED MOULDER

Condition: used, SCM T120C 8/24 Spindle Moulder Gksdjzilpgjpfx Acmsd

Condition: used, Milling machine Hans Schreiner HS-MX5110T, very good condition, 2.2 kW motor power, approx. 160 kg. Gedpfxex H Uh Ae Acmskd Prices subject to change; errors, misprints and typographical mistakes excepted.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Gkjdpfx Aouygcwscmjd Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: used, combined with: - Slot drilling device - heavy roller table   second hand Make Rex Gsdpjvwfyxjfx Acmskd Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: new, Extra strong thicknessing planer and moulder for commercial use. The special assembling of the cutterblock, allows the machine to be equipped with special moulderheads. electronic display and measuring of the table height electronic table adjustment with an accuracy of 0,1 mm extra long thicknessing table 4-cutter block automatic star/delta starting continuously adjustable feeder speed with digital display first feed roller grooved, second and third are made of steel two height adjustable cylinders on the thicknessing table 4-way table suspension planer knife gauge Technical data: planing width 820 mm feeding speed 4 - 19 m/min Gkedpfx Asvrvfhjcmsd planer shaft diameter 150 mm max. chip removal 7 mm length of thicknessing table 1200 mm motor power 100 % duty cicle 11 kW/15 HP (19 HP S6) feeding motor 1,5 kW/1 HP speed 4600 rpm dust collector plug 150 mm weight 1380 kg Additional Equipment 20 HP motor rubberized feed rollers tersa cutter shaft milling unit with cutting plates

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Gkjdovugrdjpfx Acmed Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: new, functionality: fully functional, The CU 260 FS is a multifunctional woodworking machining center that dramatically increases production capabilities even in workshops with limited space. This powerful and innovative machine is not just a combination of devices, but a complete integrated solution, replacing several machines and offering the full range of essential operations: planing, cutting/sawing, milling, and drilling/mortising. The main advantage of this model is the use of a spiral cutter block with replaceable carbide knives, which reduces noise levels by around 50% and extends the sharpness over 20 times compared to a classic straight-knife cutter block. Technical Specifications Voltage: 400 V Dimensions - width: 1600 mm Dimensions - depth: 2340 mm Dimensions - height: 1150 mm Weight approx.: 456 kg Planer Planing width: 250 mm Cutter block speed: 4,000 rpm Working height: 865 mm Number of knives: 24 pcs. Cutter block diameter: 75 mm Planer fence: 720 x 130 mm Fence tilt range: 90° - 45° Maximum chip thickness: 5 mm Motor power: 2.8 kW Motor power S1 100%: 2.0 kW Planer table length: 1,090 mm Thicknesser Thickness table length: 600 mm Thickness planing width: 250 mm Clearance - minimum material height: 5 mm Clearance - maximum material height: 185 mm Maximum chip thickness: 1.8 mm Feed speed: 8 m/min Extraction port diameter: 100 mm Drilling/mortising unit (CWM 250 series - optional) Drilling table size: 370 x 150 mm Westcott drill chuck: 0 - 16 mm Drilling depth: 90 mm Drilling width adjustment: 160 mm Height adjustment: 85 mm Extraction port diameter: 100 mm Circular saw Table size - width: 900 mm Table size - depth: 345 mm Working height: 865 mm Table extension: 600 x 460 mm Sliding table length - panel/roller: 1,600 mm Sliding table width - panel/roller: 240 mm Sliding table, carriage type: Panel Crosscut length / table travel: 1,600 mm Blade size: 250 x 30 mm Cutting height at 90°: 80 mm Cutting height at 45°: 60 mm Cutting width with guide: 910 mm Main saw blade speed: 4,750 rpm Extraction port diameter: 100 mm Motor power: 3.0 kW Motor power S1 100%: 2.2 kW Godpfx Asytc N Hscmekd Spindle moulder Spindle diameter: 30 mm Height adjustment: 110 mm Table opening: 170 mm Clamping length: 90 mm Max. profiling tool diameter: 150 mm Max. tenoning tool diameter: 150 mm Spindle speed min.: 1,400 rpm Spindle speed max.: 8,000 rpm Number of speed steps: 4 (1,400 / 4,000 / 6,000 / 8,000) Extraction port diameter: 100 mm Motor power: 2.1 kW Motor power S1 100%: 1.5 kW Scope of delivery Spiral cutter head with 24 TCT (carbide) knives Spare TCT knives (5 pcs) Planer fence Hold-down clamp Mitre cutting guide Spindle moulder guide Protective guard with extraction nozzle Connecting hose with Y-branch Aluminium fence with stop Circular saw blade 250 x 3.2 x 30 mm / 24 teeth Digital spindle speed indicator Push stick Tools