Used Mobile Scrap Shear for sale (7,471)

Condition: used, No. 10031 Mobile screening plant with trailer Spaleck SEWU 2400 x 5000 Used According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Screening plant Spaleck SEWU 2400 x 5000 Used, year of construction 2012 Trailer Multi-Trans ZAL 4PA Used Load capacity 47000 kg Weight 8600 kg Hodpfxsyl Sg So Aa Uei Conveyor belt STK Metall ML-BAND Used, year of construction 2012 Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2009, Diesel engine: 430 HP Hodjh Ngukepfx Aa Uei Rear discharge conveyor, overband magnet, radio remote control. We can also offer financing if required.

Condition: used, Year of construction: 2009, sheet width 4050 mm plate thickness 6.50 mm thickness at "Niro-steel" 4.00 mm back stop - adjustable 1000 mm work height max. 880 mm no. of strokes 6 - 11 Hub/min Control SC 70 cutting angle 0.5 - 3.0 ° down holder 23 Stück engine output 11.0 kW weight of the machine ca. 7500 kg range L-W-H 4950 x 1950 x 1720 mm Machine made from light metal production (ALU) good condition including special accessories such as sheet metal holding device - in checked condition - machine video - ?v=pv7RRijDXJA Furnishing: - electro-hydraulic/blade-guided guillotine shears - HACO CNC control model SC 70, swiveling at the front left * Pre-selection positioning of the backgauge * Digital display of actual position value * electro-hydraulic cutting angle adjustment * electro-hydraulic cutting gap adjustment * programmable retraction from the backgauge Hjdpsxaccrefx Aa Uji * Programmable cutting length limit * Emergency switch - electro-hydraulic cutting gap adjustment - electro-hydraulic cutting angle adjustment - electro-motorized back gauge, on ball screws - hydraulic hold-down devices - front finger protection - Ball rollers in the support table - 1x side stop, with mm scale - 1x freely movable foot switch - rear guard - original operating instructions including CE declaration Special accessories included: - pneumatic sheet metal holding device for thin sheet metal blanks * for sheet thicknesses up to max. 4.0 mm * optimal positioning of thin sheets

Condition: used, Year of construction: 1999, sheet width 3060 mm Hodpsxaci Eofx Aa Uoi plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions (PDF)

Condition: used, Year of construction: 2000, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes 20 Hub/min oil volume 160 ltr. cutting angle 1.6 ° Control ELGO Number of working hours ~ 1.100 h total power requirement 11.0 kW weight 5250 kg range L-W-H 3800 x 1940 x 1560 mm Hsdpfx Aajxacfas Uei from a maintenance workshop with only approx. 1.100 operating hours (!!) Equipment: - electro-hydraulic swing beam shears - ELGO NC control unit * for electric back stop * Input of target/actual position value possible - NC electro-motoric back stop * travel path of back stop X = 750 mm * back stop ball screw with no play * travel speed 100 mm/sec - electric cutting length limitation * cutting length limitation to increase the number of strokes/min. - manual cutting gap adjustment, via eccentric - tip operation with push buttons on the control panel on the left - front support plates with ball rollers - front finger/interference protection - 1x side stop with T-slot & millimeter scale - 2x front support arms - original operating instructions including CE declaration

Year of construction: 2025, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. Hedpfx Aeylwubja Uei The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) Hodpfx Aasvyc Rms Usi - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - fiber optic cable approx. 2,50 m - Extraction optional

Condition: good (used), color: grey, lifting height: 39,000 mm, mast type: telescopic, Year of construction: 2019, operating hours: 9,631 h, Drivetrain AdBlue system: Yes Make of engine: Liebherr Weights Empty weight: 63.100 kg Functional Mast length: 4.000 cm Lifting capacity: 60.000 kg CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: 096557 Other information Emission level: Stage IV / Tier IV final Delivery terms: EXW Carrier engine: D934-A7-SCR Counterweight: 25600 Hsdpfx Aajyibgaj Uoi Transport dimensions (LxWxH): 11,385x3x3,145 Production country: DE Min boom length: 1000 cm Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: excellent (used), mileage: 18,000 km, lifting height: 58,000 mm, Year of construction: 2022, operating hours: 1,160 h, Drivetrain AdBlue system: Yes Drive: Wheel Make of engine: DAF Weights Empty weight: 48.000 kg Functional Mast length: 3.400 cm Length of jib: 48 m Lifting capacity: 7.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: XL9AT400XN0251562 / 597254 Other information Tyre brand: Michelin Maximum lifting capacity at end of jib: 1700 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Carrier engine: MX11-330H3 Upper engine: John Deere Transport dimensions (LxWxH): 15,9x2,75x4 Production country: NL Hodpfx Aasyibd Se Uji Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, 1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt Hjdpfx Aoyimfzea Uji Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge Hsdoyk Dhxjpfx Aa Uei - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch - operating instructions Special equipment: - Return to transmitter (sheet metal output to the operator) - Scrap switch - Angle stop 0-180

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° Hodpfxjxabvqs Aa Uji work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) Hjdexaaghepfx Aa Usi current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: used, all stainless steel discharging height ± 1.450 mm Hjdpfx Asyhmylja Uoi 400V - 50 Hz Motor 0,55 kw mobile dimensions (l x w x h) : ± 1.450 x 1.350 x 2.900 mm

Condition: used, Year of construction: 2007, Weight: 19.000 kg Knipbank knipschaar plaatschaar Type: Hydraulisch Fabrikant: Jean Perrot Type: CSE 3G 6006 Bouwjaar: 2007 CNC: SEW DOP11A Knipbreedte: 6050mm Knipdikte: 6mm Elektrische achteraanslag Motorvermogen: 15kW Machine-afmetingen voor transport: 7400x2450x2250mm Machine-gewicht: 19000kg - Year: 2007 - Documentation available: No - CE certificate present: No - Transport weight [kg]: 19000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hsdpfx Aowng Rrsa Uei Lukas van Rossum

Condition: good (used), Year of construction: 2011, Compact dust extractor, dust extractor, dust extraction blower, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, filter system Cartridge dust extraction system, clean air system, clean air dust extractor -Filter system: Höcker Polytechnik Vacomat 200 XPE mobile dust collector -Nominal flow rate: 2260 m³/h -Exhaust fan: 3.7 kW -Intake manifold: Ø 200 mm -Individual components: electric filter cleaning, 3 chip containers, see photos Hsdpexu Dybsfx Aa Uji -Dimensions: 890/2620/H2120 mm -Weight: 440 kg

Condition: used, Year of construction: 2017, operating hours: 5,312 h, Equipment: all wheel drive, MAKE: SCHAEFF YANMAR MODEL: TW110 YEAR OF MANUFACTURE: 2017 CE MARKED: YES OPERATING HOURS: 5312 Hsdpfx Aaoymv Aae Uoi TYRES/UNDERCARRIAGE: 40% POWER: 85KW ENGINE: DEUTZ TCD 3.6L4 WEIGHT: 11200KG OPTIONS: TYRES 40% BUCKET HYDRAULIC QUICK COUPLER HAMMER LINE BLADE CENTRAL LUBRICATION SYSTEM ARTICULATED BOOM (VA BOOM) Price is excluding VAT KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN NETHERLANDS VAT ID: NL864089764B01

Condition: used, Year of construction: 2008, operating hours: 5,210 h, MAKE: CASE MODEL: WX125 YEAR OF MANUFACTURE: 2008 CE MARKED: YES ORIGINAL OPERATING HOURS: 5,233 TYRES/UNDERCARRIAGE: 60% POWER: 84 kW ENGINE: CASE 439TA-M2 WEIGHT: 12,600 kg OPTIONS: - Tyres 60% - All-wheel steering - Adjustable boom - Central lubrication system - Air conditioning - Blade and outriggers - Bucket - Hydraulic quick coupler - Hammer line - 13,000 kg machine - In good condition PRICE EXCLUDING VAT KORENBLIK MACHINERY BV Veenweg 56 7336 AG Apeldoorn Netherlands VAT ID: NL864089764B01 Hsdoymv Amopfx Aa Uei

Condition: ready for operation (used), sheet thickness steel (max.): 6 mm, power: 11 kW (14.96 HP), empty load weight: 17,500 kg, workpiece length (max.): 6,200 mm, passage width: 6,400 mm, throat depth: 60 mm, Inclusief één frontplaatsteun van 6 meter. Strokes/min: 10 > 45 str/min Hodpfxsyhib Es Aa Uoi Adjustable cutting device: 0,05 > 0,7 Adjustable cuttingedge: 0,5 > 2,0°

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Hsdoygd Aujpfx Aa Uji Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: used, Year of construction: 1979, Guillotine Shear Manufacturer: LVD Model: V25-4 Year of manufacture: 1979 Hsdpfxjyni S Ds Aa Uoi Max. sheet thickness: 4 mm Max. cutting length: 2,500 mm Precise cutting performance on sheets up to 4 mm Robust and durable machine construction Fully functional and ready for operation

Condition: new, sheet width 1050 mm plate thickness 3 mm distance between columns 1100 mm back stop - adjustable 600 mm connected load 3 kW weight of the machine ca. 1,1 t dimensions 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. Hjdpfx Aajfv H Dgj Uji These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine.

Condition: good (used), Hydraulic tank cap, tank cap Hodpfxjykz Rke Aa Uei -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm -Weight 14.5 kg

Condition: used, Year of construction: 2004, operating hours: 6,310 h, Equipment: all wheel drive, MAKE: CASE MODEL: WX185 YEAR: 2004 CE MARKED: YES OPERATING HOURS: 6310 ORIGINAL TYRES/UNDERCARRIAGE: 60% POWER: 118KW ENGINE: CASE 659TA-M2 WEIGHT: 20,450KG OPTIONS: - TYRES 60% - AIR CONDITIONING - DOZER BLADE AND OUTRIGGERS - BUCKET Hjdpfxoymiwdj Aa Uji - HYDRAULIC QUICK COUPLER - HAMMER LINE - 20,000KG MACHINE - VERY GOOD CONDITION PRICE IS EXCLUDING VAT KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN NETHERLANDS VAT ID: NL864089764B01

Condition: good (used), control type: NC control, working width: 3,050 mm, sheet thickness (max.): 3 mm, Mechanical guillotine shear cutting capacity: 3000 mm x 3 mm electrically adjustable backgauge Model: CGM 303 Serial number: 2012 Year of manufacture: 1989 dimensions: length: 390 cm width: 140 cm (without support arms) height: 150 cm Hsdpfxeymgrlj Aa Usi weight: approx. 4000 kg Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The listed price is excluding VAT (VAT deductible for businesses)