Plate Shear - Hydraulic
BAYKAL HGL 2100 x 6.0

Name: BAYKAL HGL 2100 x 6.0
Brand: BAYKAL
Availability: InStock

Year of construction

2006

Condition

Used

Location

Ahaus

Plate Shear - Hydraulic BAYKAL HGL 2100 x 6.0

Machine data

Machine type:: Plate Shear - Hydraulic

Manufacturer:: BAYKAL

Model:: HGL 2100 x 6.0

Year of construction:: 2006

Condition:: good (used)

Price & Location

Location:: 48683 Ahaus

Call

Details about the offer

Listing ID:: A22391987

Reference number:: 1125-9325453

Update:: 22.07.2026

Description

sheet width 2050 mm
plate thickness 6.0 mm
thickness at "Niro-steel" 4.0 mm
distance between columns 2100 mm
down holder 12 Stück
no. of strokes max. 26 Hub/min
cutting angle 1.6 °
back stop - adjustable 750 mm
Control ELGO
oil volume 120 ltr.
total power requirement 11.0 kW
weight 3900 kg
range L-W-H 2860 x 2100 x 1560 mm
with only approx. 400 operating hours (!!)
Original price approx. 30.000 euros
Special price upon request

Features:
- Robust electro-hydraulic oscillating shear
- ELGO digital display, Model P9521,
* for electric backgauge
- NC-controlled electric motor-driven material/backgauge
* Travel range continuously adjustable backgauge X = 750 mm
* Backgauge with backlash-free ball screw
* Travel speed: 100 mm/sec
- 1x sturdy side stop
* with T-slot and millimeter scale
- 1x sturdy support arm
Fgjdeznngxopfx Ab Aeg
- Electric cut length limiter
* Cut length limiter to increase the number of strokes per minute
- Manual kerf adjustment
* Operated centrally from the right-hand side stand
- Front support plates with ball bearings
- Front finger/interference guard
- Jog mode with push buttons on the left control panel
- Protective guard = safety device behind the machine
- Operating instructions (PDF)

Seller

Registered since: 2011

733 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Automatic circular saw KASTO GKS 400 AU/1200 CNC

Wiesbaden

1,190 km

Automatic circular saw
KASTOGKS 400 AU/1200 CNC

Call

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm Fjdpfx Aez N Amob Ajgg electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

See details

Listing

Swivel bending machine 2000 x 4 mm RAFAMET KM-4

Wiefelstede

1,085 km

Swivel bending machine 2000 x 4 mm
RAFAMETKM-4

€4,500

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) Fedpfxjv Tpxqj Ab Aogg -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

See details

Listing

Slitting line Paxson 72″ x .187″ x 50000Lb

United States

6,640 km

Slitting line
Paxson72″ x .187″ x 50000Lb

Call

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Fodpjihf Ufofx Ab Aogg Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

See details

Listing

Kaufungen

1,234 km

Bar feeder
BreuningILS RBL 80/12

Call

Listing

Lübeck

1,246 km

Press brake
TRUMPFTruBend 5320

Call

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: Fgjdpfx Aozdc A Isb Aeg + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

See details

Listing

Hydr. horizontal band sawing machine BAUER S 420

Rödermark

1,235 km

Hydr. horizontal band sawing machine
BAUERS 420

Call

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie Fodpsrl Irvefx Ab Aegg - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

See details

Listing

Press Feeding System Coiltec COMPACT FEEDER CMKS H3

Berlin

1,446 km

Press Feeding System
CoiltecCOMPACT FEEDER CMKS H3

Call

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Fodpfx Aji El Uceb Aegg

See details

Listing

Krefeld

1,031 km

Radial Drilling Machine
TOS / MASVO 50

Call

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm Fgjdpfjtv Ikljx Ab Asg workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

See details

Listing

Germany

1,293 km

Vessel Turning Unit
DUMETAD-CHGK-10-D

Call

Listing

Decoiler- and Straightening Machine BAD SALZUNGEN MR + MHD 250/4

Schmölln

1,429 km

Decoiler- and Straightening Machine
BAD SALZUNGENMR + MHD 250/4

Call

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg Fgodsfn Aqmepfx Ab Asg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

See details

Advertise here