Used Mills for sale (10,049)

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Rotor width: 650 mm 5-knife rotor Iiedskyy U Ujpfx Aa Ejk 2 rows stator knives Inlet cross section approx. 420 x 650 mm Drive motor: 37 kW

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. Iiedeghgbhjpfx Aa Ejk The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction. Iisdpfx Aaeghgb No Esk

Condition: used, machine/vehicle number: 8802, Inlet cross section approx. 650x1000 mm Iodpfx Ajghgiaea Eeik 3-knife rotor (staggered knives) 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Ijdpfx Aajghgn Ao Esik Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 11667, Rotor diameter: 450 mm Iiodpfxoghgrbe Aa Eok Rotor width: 600 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 450 x 600 mm Drive motor: 30 kW

Condition: used, machine/vehicle number: 11862, Rotor diameter: 320 mm Rotor width: 440 mm 2 x 3-blade rotors / 6 rotor blades Iodpfxsg Agpme Aa Esik Rotor blades arranged offset (paddle rotor) 2 rows of stator blades Inlet cross-section approx. 440 x 300 mm Drive motor 7.5 kW Weight approx. 800 kg

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Isdpfeg H Nf Rsx Aa Eoik Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 12727, Rotor diameter: 300 mm Rotor width: 900 mm Iiodpfx Ael A Azvja Eek 3-knife rotor 2 rows stator knives Inlet cross section approx. 300 x 900 mm Drive motor: 30 kW incl. flywheel

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Iodpoghgbtofx Aa Eoik Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Rotor blades: 5 Stator blades: 2 Ijdpfxsghgb Ee Aa Eeik Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Iiedpfxsghgfto Aa Ejk ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: used, machine/vehicle number: 3349, 2-blade double rotor Iiedpfx Aaoghgf No Ejk 3 rows of stator blades Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: used, machine/vehicle number: 11058, 3-blade rotor Iiedjghgg Hopfx Aa Eok 8 rotor blades (staggered) 2 rows of stator blades Rotor diameter: 200 mm Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 10460, 5-blade rotor Iodpjghgg Usfx Aa Esik 2 rows of stator blades Rotor diameter 400 mm Working width 600 mm Inlet cross-section approx. 500 x 600 mm

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Iijdpfxoghgq Nj Aa Eek Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: used, machine/vehicle number: 12897, Rotor diameter: 800 mm Rotor width: 1600 mm Rotor blades: 7 Ijdpfxswbwwvs Aa Eeik Stator blades: 2 Inlet cross-section approx. 800 x 1600 mm Drive motor: 160 kW

Condition: used, machine/vehicle number: 12866, Rotor diameter: 450 mm Rotor width: 600 mm Rotor blades: 4 Stator blades: 2 Iiodpfx Ajwfig Rsa Eok Inlet cross-section approx. 450 x 600 mm Drive motor: 37 kW

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA auxiliary mills of the GSL series 180/120 to 180/430 were developed as low-speed mills especially for applications in the injection moulding sector. They have a rotor diameter of 180 mm and working widths of 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be reground several times. Iijdpfx Aaeghgbde Eek The material to be shredded is fed via a noise-reduced feed hopper of sandwich construction, which is available in different versions depending on the type of feed. Depending on the task, the side mills of this series are mounted on a low or high chassis and completed with a corresponding suction/outlet trough. Together with numerous options, the side mills are extremely variable in use. In addition to the usual advantages of all low-speed mills, such as low noise emission and almost dust-free grinding material, the GSL 180/120 to GSL 180/430 beside-the-machine mills are characterized above all by their knife, rotor, quick-snap system and by their good accessibility.

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Rotor width: 600 mm Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg Iodpfxjghgfzs Aa Eoik

Condition: used, machine/vehicle number: 11431, Rotor diameter: 450 mm Rotor width: 600 mm Paddle rotor 3x3 rotor blades (offset), 2 rows of stator blades Iodpfxoghgl Ss Aa Ejik Inlet cross-section approx. 550 x 625 mm Drive motor 30 kW Suitability: Primarily for shredding hollow blow moldings and bulky molded items such as bottles, canisters, jugs, bowls, baskets, buckets, tubs, etc.

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 250 x 600 mm Iiedpjghgmzofx Aa Eok Drive motor 37 kW

Condition: used, machine/vehicle number: 13206, Rotor diameter: 300 mm Ijdpfx Aowikaaoa Ejik Rotor width: 400 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 300 x 400 mm Drive motor: 15 kW

Condition: used, machine/vehicle number: 13275, Rotor diameter: 800 mm Rotor width: 600 mm Rotor knives: 7 Stator knives: 3 Feed opening approx. 600 x 300 mm Iiedpfx Aaewikago Esk Drive motor: 110 kW For pipes and profiles up to 6 meters in length.

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Iiodpfjkyzavox Aa Eok Rotor width: 650 mm 3-knife rotor 2 rows of stator knives inlet cross section approx. 450 x 650 mm drive motor: 37 kW