Used Mep Shark 260 for sale (109)

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice Hedpfoxaagbjx Aa Ejg SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor Hjdpfsfg E H Sox Aa Eeg * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round Hodpott Nd Rsfx Aa Eeg 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: new, Year of construction: 2024, * manual cutting cycle * autom. cut: (via selector switch) with infinitely variable adjustment of the lowering speed and adjustment of the cutting pressure via compensation spring Hodpfx Aaoftmxvs Esg * Sturdy, torsion-resistant and low-vibration saw frame made of cast steel * large, easily adjustable and mounted turntable, centered by central axis bolts with indexing at 0° / 45° / 60° and internal table clamping for intermediate angles * Vise with quick adjustment * HM band guides for highest cutting precision * hydraulic unit for saw blade tensioning and monitoring with display on manometer * clearly arranged control panel with all control elements * Base frame, coolant trough, coolant pump, chip brush * cutting diameter 250 mm * Cutting width 280 mm * saw blade dimensions 2950 x 27 x 0.9 mm * Vise opening max. 285 mm * belt speed 36 / 72 m/min * Cutting range at 90 degrees: round 250 mm * Cutting range at 90 degrees: square 220 mm * Cutting range at 90 degrees: flat 280 x 220 mm * Cutting range at 60 degrees: round 120 mm * Cutting range at 60 degrees: flat 140 x 80 mm * Cutting range at 60 degrees: square 80 mm * Cutting range at 45 degrees: around 200 mm * Cutting range at 45 degrees: flat left 220 x 200 / right mm * Cutting range at 45 degrees: square left 200 / right 170 mm * Machine weight approx. 0.4 t * Space requirement approx. 1.8 x 1.3 x 1.8 m

Condition: new, Length: 1500 mm 6 rollers made of tubular steel, width: 185 mm Diameter: 20mm Height continuously adjustable: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm Hedpsfxu Tkofx Aa Eog

Year of construction: 2003, condition: used, cutting capacity - round 300 mm Hedera Rrlopfx Aa Eeg dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min weight of the machine ca. 1050 kg

Condition: new, cutting diameter 225 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm Hjdpfjxaacijx Aa Ejg capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 0,7 / 0,81 kW weight of the machine ca. 265 kg Equipment: - compact / robust manual band saw - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band - operating instructions

Condition: used, Year of construction: 2002, cutting diameter 210 mm capacity 90 degrees: flat 270 x 200 mm capacity 90 degrees: square 200 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 180 x 190 mm capacity 45 degrees: square 180 mm vice 200 mm turning speed range: 36/72 m/min dimensions of saw-band 2750 x 27 x 0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,35 t Hsdpfx Ajwkvqtja Ejg dimensions of the machine ca. 0,95 x 1,7 x 1,9 mm Bandsaw machine with: - Miter 45 ° right - Miter on turntable adjustable - Coolant system

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine Hodpfx Aajwu Hhds Eog - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC Machine is immediately available from stock, subject to prior sale

Condition: good (used), Year of construction: 2002, MEP bandsaw automat Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Hsdpew Na T Ujfx Aa Eog Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min.

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Hjdpfxecgbq Io Aa Ejg Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 x 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 x 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: square 110 x 110 mm capacity 60 degrees: flat 110 x 110 mm vice 285 mm turning speed range: 36 + 72 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP NC coolant tank 95.0 l total power requirement 1.5 / 1.8 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1000 x 2000 mm Features: Hodpfx Aew U U Uwoa Eeg - Robust electro-hydraulic semi-automatic band saw (INDUSTRY) - With miter cuts up to 60° - MEP EVO microprocessor control for controlling all functions * Front right, rotatable - Optional manual or automatic saw bow lowering * Continuously adjustable saw bow lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioning - including digital value display - 2 saw blade speeds - 1 bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Functioning of semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vise

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use Hsdpfxjfg E H Te Aa Ejg

Condition: excellent (used), operating hours: 1,170 h, MEP automatic bandsaw Hsdpfx Aew Hy Hkoa Ejg Model Shark 310 AX Capacitet round : 230 mm. Capacity square. : 310 x 220 mm. Band size: 2850 x 27 x 0,9 mm. Working hour : 1170 Excellent condition

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Hsdpfxefg E Iaj Aa Ejg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Semi-automatic, electro-hydraulic band saw machine for cutting 60° left to 60° right. Versatile machine with a tape of 4640 x 34 x 1.1 mm for the Cutting pipes, profiles and beams up to a maximum cutting range Hedpfsfg E Ibex Aa Eeg from 510x320 mm to 0°. The control console on a swiveling arm allows for comfortable and safe operation from any position. Electronic inverter for continuous belt speed regulation from 15 to 100 m/min. Large turntable with a diameter of 280 mm and engraved exact fine scaling, easily adjustable and stored.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Hjdpfsfg E H Rsx Aa Eog Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Hjdpfx Aajfg E H Uj Eog Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Hodpfjfg E H Ejx Aa Ejg Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm table height mm band speed 36/72 m/min total power requirement 1,8 kW Hedpjfg E H Nefx Aa Ejg weight of the machine ca. 440 kg dimensions of the machine ca. m Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min Hjdpfx Aajfg E Hye Eeg total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 280 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 330 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,24 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Hedpfx Aofg E H Dea Eog Attention: special price!!! •Fully automatic hydraulic band saw •Miter cuts up to 60° left possible •Saw band length: 3650x27x0.9 •Single stroke: 600 mm (programmable up to 10m) •Simple touchscreen operation. •Saw arm made of nodular cast iron - robust and stable •Required space 3.4 m² •Footprint 1900mm wide x 1800mm deep

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Hedpofm T Hbjfx Aa Eog Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t dimensions of the machine ca. m MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Hsdpjfg E H Iefx Aa Eeg Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. Hodjfg E Hzspfx Aa Eeg + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters