Used Mep Shark 270 for sale (142)

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA Bedpfxoy Ani Es Alcelh - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: used, total height: 1,750 mm, total length: 1,900 mm, total width: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No Bjdpfxoy E Shwe Alcjlh - Drive system: Conventional - Mitre cutting available: Yes - Round cutting capacity [mm]: 260 - Power [kW]: 1.5 - Saw blade length [mm]: 3150 - Saw blade width [mm]: 25.4 - Saw blade thickness [mm]: 0.9 - Saw speed [m/min]: 72 - Options: Digital readout - Transport dimensions: 1900mm x 1200mm x 1750mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Blsdpjy Txb Tjfx Alcoh

Condition: used, Year of construction: 2018, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm Bjdpfoyvvmlex Alcjlh capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW vice 340 mm weight 1240 kg dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Blsdpfx Aszapxzslcjh Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, cutting height (max.): 260 mm, cutting width (max.): 320 mm, saw band length: 3,150 mm, saw band speed: 667 mm/s, saw band width: 25 mm, TECHNICAL DETAILS Saw band dimensions: 3,150 x 25.4 x 0.9 mm Speed 1: 20 m/min Bljdpfxezapv Ts Alceh Speed 2: 40 m/min Cutting capacity at 90° (round): 260 mm Cutting capacity at 90° (square): 250 mm Cutting capacity at 90° (flat): 320 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 210 mm Cutting capacity at 45° (flat): 240 x 200 mm Control: NC EQUIPMENT - Saw band storage

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 280 mm, cutting width (max.): 330 mm, saw band length: 3,650 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Bedpezaptrofx Alcolh Saw blade dimensions: 3,650 x 27 x 0.9 mm Speed: 15/100 m/min Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Cutting capacity at 60° flat: 170 x 170 mm MACHINE DETAILS Total power requirement: 2.2 kW Weight: 1,240 kg Vise: 340 mm Dimensions: 2,020 x 2,040 x 1,740 mm EQUIPMENT - Roller conveyor 2,000 mm

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: DC, cutting height (max.): 285 mm, actuation type: manual, overall weight: 440 kg, saw band length: 2,950 mm, saw band width: 27 mm, Equipment: documentation/manual, For sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf MEP manual bandsaw machine TYPE: SHARK 282 CCS Motor power 1.5/1.8 kW Table opening 285 mm Band dimensions 2950x27x0.9 mm Weight 440 kg Bljdpfxoy Uwuuo Alcoh Speed 36/72 m/min Cutting capacity at 0° 250 / 220x220 / 280x220 Cutting capacity at 45° right 230 / 200x200 / 220x200 Cutting capacity at 45° left 200 / 170x170 / 200x140 Cutting capacity at 60° right 120 / 80x80 / 140x80 Cutting capacity at 60° left Accessories: - MD 12 micro-dosing device MINI-GF - EL-1/2-2L - Conveyor roller table, type K 110

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display Blodpfx Aey I Da Rslcjh - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm Bsdpfx Asy Hu H Eslcolh -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Blsdpoy T N I Refx Alcjh Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle Bsdpfx Aljxabavecelh * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MPE CNC total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade Blsdpfx Alexaa Ewscsh - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 1997, dimensions of saw-band 3150 x 25,4 x 0,9 mm 20/40 m/min capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm Blodpfjyyc A Isx Alceh capacity 90 degrees: flat 320 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 210 mm capacity 45 degrees: flat 240 x 200 mm

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Bodotva Nhspfx Alcolh Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Bodpfx Aofg E H Sslcjlh Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Bedpfx Aljfg E H Tocolh Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Blodpfofg E H Uex Alcoh Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Bljdpfsfg E Iaox Alcsh Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and Bodpfx Ajfg E H Rolcolh with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by Blsdofg E Hyopfx Alcsh MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min Bjdpfxofg E H Ee Alcslh total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and Bsdpfxofg E H Is Alcelh cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, Length: 1500 mm 6 rollers made of tubular steel, width: 185 mm Diameter: 20mm Height continuously adjustable: 650 - 1030 mm Space requirement: 1500 x 250 x 650/1030 mm Blsdofxu Tkopfx Alceh

Condition: used, Year of construction: 2013, functionality: limited functionality, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, empty load weight: 1,000 kg, feed length Y-axis: 500 mm, saw band length: 2,950 mm, saw band width: 27 mm, section length (max.): 9,999 mm, space requirement height: 2,100 mm, space requirement length: 2,900 mm, space requirement width: 1,950 mm, table length: 2,800 mm, table width: 245 mm, working height: 890 mm, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. Bedpfxjx Dirze Alcelh If you have any further questions, please feel free to contact us by phone or email. Best regards, Weber Geländersysteme