Band saw

MEBA 407A-OV

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Njdpfoyv In Isx Abkjlc Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Nledpfxoq Atyzs Abkec Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Condition: used, Year of construction: 1996, pressure 250 t distance between columns 2100 mm stroke 300 mm Distance table/ram, stroke up 850 mm Table surface area 2000 x 1300 mm Table height above floor 900 mm Nodpfxsvuuido Abkelc Side window 1300 mm Ram surface 2000 x 1300 mm Oil volume 1300 l Power capacity 60,0 kW Weight 39,5 t Dimensions (WxDxH) 3,4 x 3,4 x 4,6 m with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 150 mm, roller (top) diameter: 170 mm, side roll diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 1,500 kg, total length: 2,500 mm, total width: 800 mm, total height: 1,100 mm, power: 5 kW (6.80 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, PLATE ROLL 2000x6 mm SERGI 3ROLL INITIAL PINCH ASYMMETRIC 2050 X6 MM Rolls length 2050 mm Nljdpfxex Ewa Eo Abkec -Top roll 170 mm -lower/Side rolls 150 mm -Power electric 5,5 Hp Capacity -plate width 2000 mm -plate thickness 6 mm with prepinch Configuration on the machine -Rollers surface hardened high strength -Central rolls driven electric rotation on gearunit -side roll electric run with prepinch Pinch roll position with handwheel Front open manual drop-end -Readout gauge of side bending roll -Foot-pedal electric rollers rotation back/forth -Joystick electric control of side roll -Safety installations with emergency stop.

Condition: ready for operation (used), Year of construction: 1999, cutting diameter 335 mm capacity 90 degrees: flat 500 x 335 mm capacity 45 degrees: round 330 / 305 mm capacity 45 degrees: flat 320 x 335 / 305 x 335 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 335 mm saw band length 4400 x 34 x 1,1 mm Control SIEMENS speed 15 - 150 m/min Nlsdpfx Aboy Uy Svjksc work height max. 750 mm material layer max. 250 kg/m coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. 1980 kg range L-W-H 2900 x 2350 x 1900 mm current new price approx. 80.000 euros special price on request - in checked conditions - machinevideo - ?v=_FF5YAF3AUs Equipment: - MEBA double mitre bandsaw - fully automatic - with electric miter adjustment via servo motor * Adjustment right up to 60° / left up to 45° - Material feed 0 - 600 mm // with multiple feed 0 - 9999 mm - Infinitely variable lowering speed 0-300 mm/min - Saw blade speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Material feed via servo-controlled ball screw drive - roller conveyor - operating instructions Special accessories included : - MEBA hydraulic bundle tensioning device

Condition: used, Year of construction: 2011, cutting diameter 335 mm saw band length 4400 x 34 x 1,1 mm table height 750 mm 550 mm 335 mm 550 x 335 mm 330 mm cutting speed 320 x 335 mm down speed 200 mm dimensions of saw-band 200 x 335 mm workpiece weight 15 - 150 m/min Njdpfx Asy Sbkhebkjlc 3,0 kW work height max. 1500 kg connected load 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device Nodezdu Uzepfx Abkelc - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Condition: used, Year of construction: 2007, functionality: fully functional, Horizontal Bandsaw Manufacturer: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Manufacturer: Kaltenbach Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Working range (round): 360 mm Saw band dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15-90 m/min Saw band inclination: 3° Feed rate: 0 - 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor size: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC length measurement system, L = 8600 mm • CNC stop travel 7200 mm Nlodpfx Ajy H D Raebksc • Minimum quantity lubrication • Laser cutting line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation Nlodpfx Abey Ani Eekjc The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: used, Year of construction: 2021, functionality: unexamined, Metal Band Saw Automatic Daiß + Partner HBA 320 SG Power-Line, HBA 320 SG Power-Line, Year of complete overhaul: 2021, mitre saw in 2-column design, drive power: 240/400 Volt, 2.2 kW frequency motor, cutting speed: 15 - 105 m/min, reinforced gearbox for high cutting performance, hydraulic system flow rate l/min, electrics: 240/400 Volt, 50 Hz three-phase power, control voltage: 24 Volt DC, automatic feed length: 8,400 mm (in combination with PS 210: 600 mm), multiple feed standard: 2-fold, maximum workpiece support weight: 2000 kg, maximum transport force: 1000 kg, transport frame repeat accuracy: approx. 0.02 - 0.04 mm, mitre cut angle accuracy: approx. 0.05 mm at 100 mm diameter for St 37 material, saw blade dimensions: 4400 x 34 x 1.1 mm, blade tension: constant tension via spring set, weight: 2330 kg. Dimensions (L x W x H), Features: - 1 control cabinet opposite - 1 CNC control PS 95 - 2600 x 2200 x 1950 mm - 2-axis control for feed and mitre adjustment - 1 frequency drive 2.2 kW - 1 Daiß+Partner Power-Box - 1 motor-driven chip brush - 1 stepless drive via frequency converter motor - 1 micro-cooler instead of coolant unit - 1 hydraulic blade tensioning - 1 saw blade breakage monitoring - Inspection under power possible Nlsdpfx Aoyr Ifwobkoc