Used Meat Saw for sale (7,572)

Condition: good (used), Year of construction: 1969, functionality: fully functional, power: 25 kW (33.99 HP), control voltage: 380 V, Completely refurbished, it is in very good condition and features adjustable feed. It comes with 4 new bandsaw blades, each 100 mm wide. Dwodpfx Aqey U H Hajueb

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AI/086060718, overall weight: 3,450 kg, total length: 5,500 mm, total width: 2,400 mm, total height: 2,400 mm, operating pressure: 6 bar, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 1,400 rpm, Denver Skema Logic from 2018, in good condition, for automatic and manual operations. New wooden bed has been fitted, cleaned and tested. Front safety photocells can be added on request. Dwsdpfx Aozcm Uxjqusb

Condition: good (used), Year of construction: 2007, Graule miter and crosscut circular saw Type: ZS 170 Dodpfx Ajzzf Dzsqujwb with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide of the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard can be connected to a dust extraction system Model: ZS 170 Motor: 400 Volt - 2.0 kW Speed: 3500 rpm Cutting length: 410 mm at 90 degrees Saw blade diameter: 420 mm Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Dodpfjwqcbfsx Aquswb Made completly of stailes steel. Powered by air- 6 bar Measurments: by client demands

Condition: used, machine/vehicle number: 008567, Max. panel width: 3800 mm Dedpezvwi Eefx Aqujwb Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 6

Condition: good (used), Year of construction: 2019, Altendorf F45 EvoDrive panel saw in good condition and fully functional, manufactured in 2019. Saw blade tilt: 0° to 46° Max. saw blade diameter: 450 mm Max. cutting height: 150 mm (vertical) / 103 mm (at 45° tilt) Power (main motor): 5.5 kW Parallel fence: 1,000 mm Angle/cross fence: extendable up to 3,200 mm Dwodpfx Aqozzrwusujb Dust extraction connections: Ø 80 mm on the safety guard (top), Ø 120 mm on the port (bottom) Machine weight: approx. 1,200 kg Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses, excluding any warranty for defects. No guarantee, warranty, or right of return.

Condition: excellent (used), Year of construction: 2016, operating hours: 879 h, functionality: fully functional, Rex vacuum Filler for sausage linking Model RVF 327S Year 2016 Operating hours 879 Dwedpfxjzu Ncbj Aquob With 18 mm linking nozzle Holding device for casings Automatic Linking gearbox In excellent working condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Dwjdpfozxxmkex Aquob Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Max. panel length: 3200 mm Dwjdpfezvwqcsx Aquob Main saw blade projection: 150 mm No of Grippers: 9

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Weight: 1.450 kg - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Automatic - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dwedpfxeyvh Rvs Aqusb Yorick Diebels

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 345, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,350 mm, total length: 1,600 mm, total width: 1,460 mm, overall weight: 460 kg, The Ergonomic 290.250 GAE is an automatic band saw with a smooth arm feed, allowing for cutting materials with a diameter of 5 to 250 mm. Where is the Ergonomic 290.250 GAE best suited? - on construction sites; - in locksmith workshops; - in production halls; - wherever precision and accuracy are important; - for cutting metals. How does the Ergonomic 290.250 GAE compare to the competition? Dwsdpfx Aozypn Ujqujb - hydraulic arm lifting and lowering; - hydraulic vise; - cutting to the right at angles of 0° – 45° – 60°; - smooth arm feed; - ability to program different lengths and quantities of cut pieces in a single program; - ADFR system; - built-in cooling system to protect against overheating; - bimetallic band saw blade; - brush for thoroughly cleaning the blade of chips; - ability to memorize the arm position; - clear LCD display. The machine is in fully working condition; we invite you to inspect it. Transportation is the buyer's responsibility.

Year of construction: 2004, condition: good (used), Maja EVM 4006 Membrane Skinners Quantity 3 in stock 560 mm rollers Fully stainless steel CE Marked. 3 phase / 50Hz 2.2 amp, 0.75KW Djdpfxeim Swao Aquewb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, control type: manual, actuation type: electric, total height: 2,000 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 700 kg, Equipment: CE marking, chip conveyor, documentation/manual, lighting, rotational speed infinitely variable, COSEN SH-4030, semi-automatic horizontal metal bandsaw Technical data: Manufacturer: COSEN Mechatronics Co., Ltd. Model: SH-4030 Machine type: Horizontal metal bandsaw Year of manufacture: 01/2017 Electrical connection: 400 V / 50 Hz / 3 phases Rated power: 4.5 kW Rated current: 10.52 A Bandsaw blade dimensions: 3820 x 34 x 1.1 mm Cutting speed: 20 – 100 m/min Coolant pump: 0.09 kW Hydraulic power: 0.75 kW Dedpfszy Nzhex Aquowb Hydraulic pressure: 3 MPa Max. cutting range: Round material: Ø 300 mm Square material: 300 x 300 mm Rectangular material: 300 x 400 mm Machine weight: approx. 700 kg Model designation: COSEN SH-4030

Condition: used, Year of construction: 1975, Wood Format Saw KAMRO type FK Maxi Rotation: 4000 RPM Year of construction: 1975 Blades dimensions: Ø 400 x 3,5 x 30 mm (blade not supplied with the machine) Back gear gauge length: 1500 mm Voltage: 380 V Djdpfjzy Rt Ssx Aquowb Length: 2600 mm Depth: 2000 mm Weight: 800 kg

Year of construction: 2019, operating hours: 82 h, condition: used, empty load weight: 175 kg, Weight: 175 kg Year of construction: 2019 Operating hours: 82 Djdpfezzf A Dex Aquowb Condition: Good condition Price: € 900,- ex VAT

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 380 V, cutting height (max.): 110 mm, cutting width (max.): 920 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, rotational speed (max.): 3,000 rpm, total length: 1,080 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 150 kg, Equipment: documentation/manual, saw blade guard, For sale is a DEWALT radial arm saw 1600S in very good condition (almost new) with accessories and 3 new, unused saw table shims. The saw is being sold privately and has never been used professionally, which explains its excellent condition. Dsdpfxezyymbj Aquewb It is specifically designed for stationary use. Thanks to the powerful 4 hp motor, materials up to 110 mm thick can be processed with saw blades up to 350 mm in diameter. The motor runs with the highest precision on 8 large special ball bearings in the prismatically ground running surfaces of the arm. The arm, column, and frame have additional reinforcements. The DEWALT 1600S is also suitable for use with pneumatic feed in series production. With a cutting width of 610 mm, the DEWALT 1600S is the ideal machine for processing series parts in interior design, shop fitting, trade fair construction, furniture manufacturing, and the industrial production of wooden components. The saw has a sturdy metal base, three new, unused work tables, a new universal saw blade, and various accessories. The original operating manual is included. Max. cutting length (90° crosscut): 610 mm Standard cutting depth: 110 mm Max. cutting depth (45° miter cut): 60 mm Max. cutting width (rip cut): 920 mm The saw must be picked up.

Condition: new, Year of construction: 2026, warranty duration: 24 months, Hobby Butcher SET The filling machine is designed for filling small and large quantities of meat. Dwjdpfxsp H Tkfo Aquob The mixer is suitable for meat and dough, kipper container and removable agitator The saw can be used for sawing frozen products and all kinds of bones. The butcher's table is made of stainless steel and has a coterm plate, which offers a high level of hygiene and a long life. The Kotterm plate does not damage the cutting edges and has a high resistance to cuts, liquids, hot water, acids and alkalis. All these items are easy to use and clean. Made of high quality steel, 2 years warranty. HOBBY BUTCHER PACKAGE Art. 303.202 'E 1720 Electric saw 1720 Art. 301.111 MS 40 Free standing mixer for meat and dough Art. 302.113 PR15 Hand filling machine 15l Art. 320.401 TIK55 Meat block for chopping meat Hobby Butcher package 500x500

Condition: excellent (used), functionality: fully functional, Equipment: motor brake, a very nice HEMA band saw, max. cutting width 600mm, motor newly re-wound. Technically fully inspected. Condition very good. Several saw blades are included. Free delivery is possible within a radius of up to 150 km. Dedjzzwm Ijpfx Aquswb

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Horizontal thin-cutting band saw 300 mm working width, tillable 12 degrees New 2025 model with bigger wheels and inverters on wheels. 80 mm blade width Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Dwsdpfezy H Dyox Aqusb Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) 2 air cushion tables, each with blower Dwodozyx Evepfx Aqujb Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale: a Seydelmann K40 meat cutter/sausage cutter with a blade shaft speed of 1,500 to 3,000 rpm and a 2-speed bowl. Voltage: 400V, 26A, 13kW. The machine is made entirely of V2A stainless steel and is ready to plug in. The machine has been workshop-tested and is equipped with a 6-blade cutting head. Year of manufacture: 2001. Further details available upon request. Dodozxqntepfx Aqujwb Payment by cash or in advance! Sale only to commercial businesses. No guarantee, no warranty.

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: a K+G Wetter SM-65STL meat grinder/cutter. The machine is entirely made of stainless steel and is ready for immediate use. Power: 380V, 50A, 25kW. Knife shaft with infinitely variable speed adjustment, range 50-5000 rpm. Mixing speed (reverse), range 50-500 rpm. Bowl with 2 speeds, 9/18 rpm. 6-blade knife head. Without a deflector plate. Further details upon request. Payment by cash or prepayment! Dwodpfx Ajzxqpwequjb Sale only to commercial customers. No guarantee, no warranty.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. Dwsdpfsxq Rgysx Aqueb The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Dsdpfx Aqsx R U Epouowb Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) Dwsdpfxozc Rgrj Aquob 3 axis Also available from the same location - Bellani Modulo edge polisher (2010)