Used Mazak H 630 for sale (300)

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dedpfx Abei Eb Dne Aecp

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Dcjdoi Eb Drjpfx Ab Aep

Condition: like new (used), Year of construction: 2016, operating hours: 7,800 h, functionality: fully functional, total length: 6,500 mm, overall weight: 17,500 kg, Equipment: chip conveyor, documentation/manual, Machine fully working condition, chip conveyor 30pc tool ISO 50 Dcedpfx Abo Ahfaco Asp

Condition: good (used), Year of construction: 2011, functionality: fully functional, Horizontal machining center MAZAK Model: HCN 6000 Year: 2011 Control unit: MAZATROL MATRIX 2 X-axis travel: 800 Y-axis travel: 800 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece size (length x width x height): D.900 x H.1000 Table surface: Tapped holes Maximum workpiece weight: 1000 Spindle speed: 7000 Spindle connection: ISO 50 Torque (continuous / 10 min): 680 Nm Rapid traverse rate X-axis: 60000 Rapid traverse rate Y-axis: 60000 Dcsdpfxez Apace Ab Aop Rapid traverse rate Z-axis: 60000 Number of tools: 60 Maximum tool diameter: 250 Maximum tool length (from reference line): 500 Tool selection method: Fixed Maximum tool weight: 30 Kg Tool change time: 5 sec. Pressure: 50 BAR Height: 3350 Width: 2820 Depth: 6755 Weight: 14700 Tool kit included

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G X-axis travel: 730 Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Dedpfx Ajz Aauksb Aocp Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: good (used), Year of construction: 2003, functionality: fully functional, Horizontal machining center MAZAK Model: VARIAXIS 630-5X, complete with PALLETECH system with 12 pallets + 2 loading/unloading stations Year: 2003 Table size: 500 x 500 X-axis travel: 630 mm Y-axis travel: 765 mm Z-axis travel: 560 mm Spindle connection: ISO 40 Spindle speed (main spindle): 12,000 rpm Number of tools (ATC magazine): 120 Spindle power: 26 Kw High-pressure system through the spindle: 18 BAR Chip conveyor with belt Dodpfsz Apg Ajx Ab Ascp Control unit: Mazatrol 640M Maximum load on the table: 500 Kg Weight (machine dimensions): 25,000 Kg Renishaw radio probing system

Condition: like new (used), Year of construction: 2025, functionality: fully functional, MAZAK INTEGREX i-250H S U1000 Max. machining diameter: 670 mm Dcodpfx Abj Ah Dx Ao Ajp Max. machining length: 1,011 mm Max. milling speed: 12,000 RPM Max. spindle speed: 5,000 RPM Max. bar diameter: 65 mm!!! Machine is equipped with: - CNC control: Mazatrol SmoothAi - Tool magazine for 74 tools (CAPTO) - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for 2nd spindle, diameter 210 mm - Tool Eye - Y-axis - B-axis 0.0001° (swiveling head) - C-axis (main spindle) input accuracy 0.0001° - Counter spindle with full C-axis - Main spindle with spindle bore 65 mm - Interface for bar loader magazine - 5-axis machining package for SmoothAi - Tailstock function, counter spindle!!! - Preparation for MAZAK Monitoring System B - Chip conveyor - KNOLL KSS compact filter system - Approx. 80-85 pieces of CAPTO tool holders!!! * Like new, with only approx. 350 machining hours!!! * IMMEDIATELY AVAILABLE

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 165631, Manufacturer: Mazak Model: PFH-4800 Year of manufacture: 2003 Machine type: Horizontal CNC Machining Centre CNC control: Mazatrol PC Fusion 640M Working range Dodpfxjz D Ay No Ab Ajcp • X-axis: 560 mm • Y-axis: 630 mm • Z-axis: 600 mm • Pallet size: 400 × 400 mm • Pallet indexing: 0.001° Spindle • Spindle taper: ISO 40 / CAT 40 • Maximum spindle speed: 12,000–15,000 rpm, depending on configuration • Spindle motor: approx. 22–30 kW, depending on configuration Tool changer • Tool capacity: 80 tools • Tool holder: CAT 40 / ISO 40 • Tool-to-tool time: approx. 2.2–2.7 sec., depending on tool weight

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 157152, MAZAK FH-6800 – Technical Specifications Manufacturer: Mazak Model: FH-6800 Year of manufacture: 2001 Machine type: Horizontal CNC Machining Centre CNC control: MAZATROL PC-FUSION 640M Number of axes: 4-axis Working range • X-axis travel: 1,050 mm • Y-axis travel: 800 mm • Z-axis travel: 880 mm • Pallet size: 630 × 630 mm • Pallet load capacity: approx. 1,500 kg • B-axis: 360° indexing • B-axis resolution: 0.001° Spindle • Spindle taper: CAT 50 Djdpfjz D Azysx Ab Aecp • Maximum spindle speed: 7,000 rpm • Spindle motor: approx. 37 kW • High-pressure coolant through spindle: Yes, documented at 70 bar on one 2001 specification sheet Tool changer • Tool magazine capacity: 120 tools • Tool holder: CAT 50 • Automatic Tool Changer (ATC): 120 stations

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Dcjdpfx Aozg U Tpsb Aop Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit Dodpfxex Db D Ao Ab Aocp - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, HORIZONTAL MACHINING CENTER MAZAK HCN 5000 cnc Smooth G MACHINE COMPLETE WITH A 6-STATION PALLETECH SYSTEM AND A LOADING/UNLOADING UNIT RENISHAW OMP60 Control unit: SMOOTH G X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Dcjdpfx Ajz Iw Ezjb Ajp Table surface with threaded holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm Spindle connection: ISO 40 Torque (continuous / 10 min): 168 NM Number of tools: 120 Pressure: 15 bar, preparation: 70 bar PALLET size: 500x500

Condition: used, Year of construction: 2007, Mazak Integrex E500H-II Multi-tasking CNC Lathe (2007), Maximum Cutting Diameter 820mm, Maximum Cutting Length 1500mm, C axis 0.0001 degrees, B Axis -30/+210 degrees, 40 ATC, Spindle Speed 1,600rpm, Milling Speed 10,000rpm, Main Spindle 37Kw, Spindle Taper din50, Y axis -/+ 250mm, Mazatrol Matrix Control, Swarf Conveyor. S/No. 186364. Country of Origin: Japan Location: This lot is located in Leicester, UK. A charge of £375 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dsdpo Ah E Dbofx Ab Ajcp

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, total height: 2,813 mm, total width: 2,623 mm, table width: 500 mm, table length: 500 mm, overall weight: 11,430 kg, spindle speed (max.): 18,000 rpm, tool weight: 12,000 g, product length (max.): 5,769 mm, number of axes: 4, This 4-axis Mazak HCN-5000 was manufactured in 2024. It features an X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 800 mm. The machine has a maximum workpiece weight of 700 kg and a spindle speed of 18,000 RPM. If you are looking to get high-quality machining capabilities, consider the Mazak HCN-5000 horizontal machining centre we have for sale. Contact us for further details. • Quantity/configuration: 5 machines total; identical configuration except tool changer capacity: • 3 machines with 40 tools • 1 machine with 60 tools • 1 machine with 80 tools • Control unit: Smooth G • Pallet size: 500 x 500 mm • Max. workpiece dimensions (L x W x H): D. 800 x 1000 mm • Table surface: Tapped holes • Max. workpiece weight: 700 kg • Rapid traverse (X/Y/Z): 60,000 mm/min • Max. tool diameter: D. 95 mm / D. 170 mm • Max. tool length: 170 mm • Tool selection method: Fixed • Tool change time: 2.8 s • Coolant pressure: 15 bar • Coolant tank capacity: 500 L Additional equipment • Tsubakimoto Mayfran ConSep 2000 chip conveyor/separator • Butti chip container Djdezw Dtaopfx Ab Aocp • Mist collector line setup Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Dodoz Dtmgopfx Ab Aecp Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: like new (used), Year of construction: 2023, operating hours: 3,837 h, functionality: fully functional, machine/vehicle number: 346574, turning length: 500 mm, turning diameter: 276 mm, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, bar diameter (max.): 80 mm, Equipment: rotational speed infinitely variable, The machine was put into operation in February 2024 and has 2465 automatic operating hours. It is used solely for machining 95% plastics and 5% brass. The subspindle has a two-jaw chuck to accommodate milling contours. The machine can be inspected during production at any time and is in like-new condition. The investment, including accessories, was €241,000. It has a 12-station turret, all powered. For sale EXW 91413 Neustadt. Dcodpfx Ajynnhwob Ajp

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Dcsdpfx Aboz Rmn Es Ajp Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 1990, operating hours: 18,960 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, controller manufacturer: Mitsubishi CNC Co., total height: 2,206 mm, total length: 2,490 mm, total width: 3,220 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 7,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 5,500 W, spindle mount: MK 4, number of spindles: 1, additional equipment features: + same Extra Machine for spare parts!, Equipment: chip conveyor, documentation/manual, We offer this very good Mazak H400 horizontal machining center, year of construction 1990. Manufacturer: MAZAK Model: H400 NC number: M335M038240 Manufacture date: April 1990 Serial number: A81117 EXTRA NOTES: - The price includes AN EXTRA Machine as the one provided for SPARE PARTS! (attached pictures) - The offer includes many Tool Holders, Coillets, two fixturing Hubs! Dcsdpsz E I Twefx Ab Aop If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Z: ball screw Dodpfxozg U Aks Ab Ajcp Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Mazak FH-5800 – Horizontal Machining Center Spindle cooling Max. 12,000 RPM Z = 660 millimeters X = 710 millimeters Dcedpfx Absz Ehkpo Aep Y = 610 millimeters Tool magazine for 40 tools, newer control system – 2-pallet system.

Condition: like new (used), Year of construction: 2024, MAZAK QUICK TURN 200MSY Max. machining diameter: 380 mm Max. machining length: 575 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol SmoothG - Hydraulic KITAGAWA 3-jaw chuck BB-208 for main spindle, diameter 210 mm - Hydraulic KITAGAWA 3-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001° - Y-axis - Interface for bar feeder - Automatic parts catcher - Robot interface Dcodpfszgw Icjx Ab Ajp - Reinforced coolant pump - MAYFRAN chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,960 h, functionality: fully functional, machine/vehicle number: 238911, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,325 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,400 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,325 mm Table area (L x W): 800 x 800 mm Spindle speed: 8,000 rpm Spindle torque: 1,218 Nm Tool changer positions: 80 MACHINE DETAILS Number of pallets: 2 Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 3,000 x 3,500 mm Weight: approx. 30,800 kg Djdpszi Ai Rofx Ab Ascp Operating Hours (according to image) Operating hours: 54,415 h Power-on hours: 30,498 h Cutting hours: 25,960 h EQUIPMENT Tool magazine for 80 tools, SK 50 DIN69871 Air blow-off device on the workpiece Interface for high-pressure cooling system 70 bar, Knoll Chip conveyor Preparation for Mazak Monitoring System B, optical probe type OMP60 Synchronized tapping Rapid traverse with constant pitch during angular movements 2-pallet changer Spindle with increased torque NC rotary table with 360,000 positions MAZAK Monitoring System B, optical probe type OMP60 Automatic tool length measurement

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 1,000 mm, total height: 3,050 mm, total length: 9,850 mm, total width: 10,145 mm, overall weight: 11,600 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 22 W, Equipment: chip conveyor, documentation/manual, We are pleased to offer this very well-maintained Mazak PFH 5800 with the Mazak Palletech system. This horizontal machining centre is a flexible, automated production system and is suitable for unmanned production. The machine was manufactured in 2004 and is fitted with the Mazatrol 640M control system. Technical specifications: Pallet table size: 500 x 500 mm Number of pallets: 10 Table load: 700 kg Movement X-axis: 730 mm Movement Y-axis : 730 mm Movement Z-axis : 740 mm Table indexing: 360 x1 ° Spindle Taper: CAT 40 Spindle speed: 12.000 1/min Spindle motor: 22/15 kW Magazin capacity: 80 Required floor space: 9850 x 10145 mm We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally! Dsdpfx Abez Rmh Eo Aocp

Condition: excellent (used), Year of construction: 2006, Control: Mazatrol Matrix Nexus Dcsdpfx Ao Ah Iz Nsb Asp Travel ranges X/Y/Z: 730 x 730 x 740 mm Spindle speed: 18,000 min-1 Tool magazine for 120 tools, SK 40 2-position pallet changer Pallet size: 500 x 500 mm NC rotary table (4th axis) High-pressure coolant system through the spindle, 60 bar

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm 40 ATC DIN40 / Renishaw probing Dcjdezxr Twepfx Ab Aop Pallet size 400mm x 400mm